Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Antioch Homeowners Choose Toto Construction
We provide independent Toto construction service in Antioch, which means we install, repair, and remodel around Toto toilets, Washlets, and lavatories without being tied to Toto’s authorized network. What sets our Toto work apart is model-level familiarity: we know how a Drake fill valve behaves after years of Antioch’s mineral-heavy water and how an Ultramax II flange sits in a house built on the flats.
Groundwork Construction Co. of Antioch is not affiliated with, sponsored by, or authorized by Toto. We’re an independent provider, and we say so plainly. That independence is why we can recommend a genuine OEM part or an honest replacement based on what your fixture actually needs, not on what a manufacturer program rewards. Our technicians have up to 12 years of experience. Call (888) 419-3650 and a live person answers, day or night.
Why Trust Groundwork Construction Co. of Antioch for Your Toto Construction?
Toto fixtures have tight tolerances. A Drake two-piece toilet (CST743/CST454) and an Ultramax II one-piece (MS604114CEFG) use different fill valves, different tank-to-bowl sealing, and different flange clearances. Install the wrong part and you get ghost flushing, a rocking base, or a slow leak you won’t notice until the subfloor softens. Our technicians treat every Toto job as a model-specific job: we identify the exact series before we touch a wrench, confirm the rough-in, and match components to what Toto actually built.
We source genuine Toto OEM fill valves, flappers, gaskets, and Washlet components when we’re matching an original fixture. On warranty-safe practice, we keep the fixture’s original configuration intact wherever a warranty could still apply, and we don’t swap OEM parts for cheap substitutes on a covered unit. Every project is backed by our 730-Day Done Right Promise, so if the work isn’t right, we make it right. Pricing is upfront and the number you see is the number you pay. Calls are answered by a live person, 24/7, which matters when a toilet is leaking into a ceiling at 11 p.m.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Antioch
Antioch’s water is mineral-heavy, and a lot of the older flats still run on untreated supply. That single fact drives most of the Toto issues we see across the city. Here are the five we fix most often.
- Drake fill valve diaphragm wear. On Drake and Drake II two-piece models (CST743/CST454), the fill valve diaphragm hardens and wears out after roughly 5 to 7 years. That shows up as weak refill, a toilet that keeps running, or ghost flushing where the tank tops itself up hours after a flush.
- Ultramax II wax ring and flange seal failure. Older Ultramax IIs sit on wax rings that compress and fail over time, especially where the flange is set too low or the floor has shifted on clay-heavy soils. The symptom is a slow leak under the tile that you usually smell before you see.
- Washlet electronic seat faults. The C100, C200, and S550e seats are the usual suspects. Pump failure, hard-water scale clogging the nozzle, and control-board corrosion from moisture or mineral buildup show up more in Antioch because the water is untreated in many homes. If the seat stops heating or the spray weakens, scale is the first thing we check.
- Tank-to-bowl gasket compression set. Two-piece Toto models use a gasket between the tank and bowl that flattens and dries out. The result is rocking, seepage at the base, and sometimes rusted bolts that make the tank unstable.
- EcoPower and EcoFlush supply-line quirks. High-efficiency models that meet a low-flow demand on older plumbing can reveal supply-line and rough-in mismatches the previous fixture masked. We pressure-check the line and confirm the rough-in before we call an install done.
Toto Parts & Our Repair-vs-Replace Approach
We source genuine Toto OEM fill valves, flappers, gaskets, and Washlet components when we’re matching the original model number, because that’s how you avoid a call-back. We don’t stock parts locally; the right part is ordered to your exact fixture, which costs a day or two but gets the fit right the first time. We use quality aftermarket kits only for out-of-production parts where OEM supply has dried up, and we tell you when that happens.
The repair-or-replace decision is honest. A worn fill valve gets replaced. A cracked bowl, or a failed Washlet board that runs more than half the cost of a new unit, leans toward replacement. We give you the numbers both ways so you decide, not us. Call (888) 419-3650 for a free estimate and we’ll tell you straight which makes sense.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We identify the exact Toto model from the stamp on the tank or the seat label, then test fill, flush, seal, and electronics where a Washlet is involved. On a remodel, we confirm the rough-in before anything is ordered.
- 2
Repair or install. We match OEM parts to the fixture, set the flange height correctly, and re-set the toilet on a new seal. Washlet installs get a compatibility check against the existing bowl before the seat goes on.
- 3
Test. We flush repeatedly, watch for ghost refilling, check for seepage at the base, and run the Washlet through its full cycle, including heat and spray, at the finished bathroom’s actual water pressure.
- 4
Warranty. Every job is covered by our 730-Day Done Right Promise, and we hand you the part numbers and the model in writing so any future service is simple.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Antioch
We work on the Toto lines that show up most in Antioch homes. That covers Drake and Drake II two-piece toilets (CST743/CST454), Ultramax II one-piece toilets (MS604114CEFG), Washlet C100, C200, and S550e electronic bidet seats, and the EcoPower and EcoFlush high-efficiency toilets. We install new fixtures, repair existing ones, and respond to the model-specific failures each line is known for. Electrical work on Washlets and any tile resetting is done to code, with permits pulled where a remodel requires them.
We Also Service These Brands
Groundwork Construction Co. of Antioch isn’t a single-brand shop. We work across KraftMaid and Cambria in kitchens, Silestone and Kohler in baths and fixtures, and dozens of other brands across every trade. That breadth means your Toto job fits inside a larger remodel without a second contractor, and you get one point of accountability, from foundation to finish line.
FAQs – Toto Construction Service in Antioch
The fill valve diaphragm is worn or the flapper isn’t sealing, which lets water trickle into the bowl and the tank top itself back up. In Antioch, mineral-heavy water speeds up that wear. A new OEM fill valve and flapper usually ends it; if it’s been doing this a while, we check the seal at the base too. Call (888) 419-3650 for an exact quote; estimates are free.
Yes, in most cases. Washlet seats are built to fit standard Toto bowls, but the exact model has to match the bowl’s shape and the outlet has to be within reach. During a remodel, we run a dedicated outlet and check compatibility before ordering the seat, so nothing stalls mid-job.
The wax ring has failed or the flange is set too low, which lets water seep under the tile instead of into the drain. Older Ultramax installations on Antioch’s shifting clay soils are prone to this. We pull the toilet, check flange height, and re-set it on a fresh seal. Call (888) 419-3650 to schedule a look; estimates are free.
They do, and it’s one of the things that catches people. Toto high-efficiency models, including the EcoPower and EcoFlush lines, need the rough-in confirmed to the tenth of an inch before a remodel sets the drain location. Get it wrong and the toilet won’t sit flush to the wall. We verify rough-in and supply-line placement before any tile goes down.
If the control board or heating element has failed and the part costs more than half a new seat, replacement is the honest call. If it’s scale in the nozzle or a clogged pump, we clean and repair it. We price both options for you before you commit.
It depends on the scope. Fixture installation and tile work sit at the low end; a full bathroom remodel with Toto fixtures included runs higher. Here’s what Antioch homeowners typically see:
| Service | Typical range |
|---|---|
| Full Bathroom Remodeling (Toto fixture installation included) | $9,000 – $28,000 |
| Small Bathroom Remodel (Toto toilet and Washlet-ready) | $5,000 – $12,000 |
| Tub-to-Shower Conversion (Toto fixture-ready) | $3,500 – $10,000 |
| Tile & Fixtures (Toto toilet, lavatory, and shower trim) | $800 – $3,000 |
Call (888) 419-3650 for an exact quote; estimates are free, and we hand you a written line-item breakdown with no change orders.
Book Your Toto Service in Antioch, CA
Whether you need a Drake fill valve replaced, an Ultramax II re-seated, or a full bathroom remodel built around a new Washlet, we’ll give you straight answers and upfront pricing. Every project is backed by our 730-Day Done Right Promise. Call Groundwork Construction Co. of Antioch at (888) 419-3650 to schedule your free estimate. A live person answers, day or night.
Written by the team at Groundwork Construction Co. of Antioch.