Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Antioch, CA: What They Cost and How the Work Goes
Custom & geometric windows in Antioch typically run $450 – $1,400 per opening, with most whole-house packages landing between $8,000 and $18,000 installed. Arch-tops, angled corner units, trapezoids and full radius walls take longer than rectangles because every unit is measured, templated and built to order. From signed contract to final inspection you’re looking at 6 – 10 weeks, and a single special-shape unit can slot in as a one-day retrofit. Call (888) 419-3650 to book a free on-site estimate.

Here’s what matters before you pick a shape: a geometric window is only as good as the opening it sits in. In Antioch’s older flats, that opening is usually a 1950s-to-1970s ranch wall or a downtown bungalow facade, and the rough framing behind the drywall was never built for anything but a rectangle. When you go arched or angled, the framer has to build the curve or the splay, the trim carpenter has to match the existing casing, and the glazier has to source a unit that curves the same way. Our technicians bring up to 12 years of experience to that sequence, and we back the finished work with our 730-Day Done Right Promise.
How Custom & Geometric Windows Get Built: The Five Stages
Every job runs the same order, and knowing the order is what keeps a homeowner from making a costly decision at the wrong moment. Here’s the real sequence.
- Stage 1: Measure and template (day 1, 2 – 3 hours). We take field dimensions at the rough opening, note the wall assembly, check for settling and confirm the finish elevation so the interior sill and exterior trim line up. You decide at this stage whether the shape is a full arch, a segmental arch or an angled corner, because that choice changes the template we send to the fabricator.
- Stage 2: Order and fabrication (weeks 2 – 5). Custom units go to the manufacturer once the template and glass spec are signed off. You choose glass type here: dual-pane low-E is standard, tempered is required near doors and low sills, and laminated glass is the option for street-facing noise. Lead time is the single biggest driver of the calendar.
- Stage 3: Demo and reframe (day 1 on site, 1 – 2 days). The old single-pane or early aluminum unit comes out, the rough opening is squared and shimmed, and any rot in the sill or header is addressed before the new frame goes in. If we find dry rot behind the wall, we show you the photo and price the repair before we proceed.
- Stage 4: Set, seal and trim (days 2 – 3). The geometric unit is set plumb and level, flashed and sealed, and the interior casing and exterior trim are installed to match the existing profile. This is where an arched window earns its money or doesn’t: the curve has to repeat cleanly from the glass to the trim.
- Stage 5: Inspection and punch (day 4 – 5). We walk the job with you, verify operation and locking, and hand over the manufacturer warranty documentation alongside our own 730-Day Done Right Promise. Any punch items get scheduled on the spot.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on Custom & Geometric Windows
The shapes get the attention, but the frame material and glass package are what you actually live with for the next 20 years. Here’s the honest trade-off on each.
- Wood-frame with a clad exterior. The best finish for an arched or angled unit because wood takes a curve and holds a stain grade the way a factory extrusion can’t. It’s the most expensive option and needs an exterior cladding (aluminum or vinyl) to survive Antioch’s Delta wind and summer sun.
- Vinyl geometric units. The cost-efficient choice for a rectangle plus a simple segmental arch. Vinyl handles a fixed arch well but struggles with a true radius on a working sash, and cheap vinyl yellows under the afternoon wind off the river.
- Fiberglass frames. The middle ground. It holds a curve better than vinyl, takes paint, and resists the seasonal swelling that comes with a high water table, but the color palette is narrower.
- Glass packages. Dual-pane low-E handles the hot summers; add argon and a warm-edge spacer for the fog-influenced winter mornings. Tempered glass is code-required within a certain distance of a door or low sill, and laminated glass is worth the upcharge on a street-facing arch.
- Shape and configuration. A half-round or full arch over a picture window is the most common geometric request we see, followed by angled corner units and trapezoids under a gable. A true radius is a fabricator’s job; a stepped or segmented arch can sometimes reuse existing framing and save money.
What Custom & Geometric Windows Cost in Antioch, CA
Plan on $450 – $1,400 per custom or geometric unit installed, with whole-house packages running $8,000 – $18,000. A single special-shape retrofit into existing framing is on the low end; a full facade rebuild with new framing, trim and glass upgrades is on the high end. That range holds across Antioch because the work is measured per opening, not per house.
Five variables push the number:
- Size and shape. A 6-foot half-round over a picture window is a straight-forward fabricator order; a two-story radius wall is not.
- Existing wall condition. Original single-pane framing in a 1960s ranch often hides rot or settling, and reframing adds cost and days.
- Framing changes. Relocating structure to fit an angled unit means a header, a permit and a framing crew.
- Material grade. Wood-clad sits at the top of the range, vinyl at the bottom, fiberglass in the middle.
- Permit scope. A like-for-like window swap is typically a minor permit; altering framing or opening size triggers a fuller review.
A written estimate from us includes the unit, framing and reframing, flashing, trim, glass package, permit coordination and haul-away. It does not include structural engineering if we find a header problem mid-job, or finish painting, which we’ll flag before we start so there’s no change order surprise. Upfront pricing means the number you see is the number you pay, and projects over $10,000 qualify for $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Antioch Homes Specifically Do to Custom & Geometric Windows
Antioch sits on the Delta at the foot of the East Bay hills, and that geography shapes every window job here. The older flats, especially around downtown and the river-adjacent blocks, sit on expansive clay with a high water table. That means a window opening is never just a hole in a wall: seasonal soil swelling and shrinkage move the framing, and a geometric unit that’s set plumb today can rack out of square within a few seasons if the sill prep and flashing aren’t done right. The afternoon Delta wind drives dust and rain against the west and south elevations hard, so we spec exterior cladding and a tighter flashing detail on river-facing walls than we would a mile inland.

The housing mix splits the work. On the 1950s-to-1970s ranch tract homes on the flats, a custom window almost always means retrofitting an original single-pane opening, and we routinely find that the rough framing was cut for a rectangle and nothing curvier. On the newer hill subdivisions from the 1980s through the 2000s, we’re usually replacing builder-grade aluminum with a geometric unit that matches the original architecture. Either way, a modest window alteration here still needs a permit and an inspection, often coordinated with a City of Antioch building inspector, and we handle that paperwork so the homeowner isn’t chasing signatures. Homeowners adding a window as part of a larger facade project often pair this with Concrete Driveways & Concrete Work in Antioch or Asphalt Driveways & Resurfacing in Antioch so the front elevation comes together in one pass.
If we’re pulling more than a couple of window openings, that usually becomes part of a full Windows & Doors in Antioch scope, and our broader Windows & Doors service team handles the coordination. We cover Antioch end to end, including Oakley, Brentwood, Bay Point and Pittsburg for homeowners who want the same crew across a project.
Serving Antioch, CA – Our Local Coverage Area
We serve Antioch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Custom & Geometric Windows in Antioch
A single special-shape unit is typically a one-day install once it arrives; the longest wait is fabrication, which runs 3 – 6 weeks for a true radius. Whole-house packages take 6 – 10 weeks from contract to inspection. Call (888) 419-3650 for a schedule that fits your project.
Yes, most window alterations in Antioch require a permit, and any change to framing or opening size triggers a fuller review. We pull the permit and coordinate the inspection as part of the estimate. Call (888) 419-3650 to get the permit scope sorted before you buy the unit.
Often, yes. A segmented or stepped arch can usually reuse the existing framing, while a true radius or angled corner often needs a new header and a framing change. We measure the rough opening on day one and tell you which path you’re on. Call (888) 419-3650 to book the measure.
Custom and geometric windows run $450 – $1,400 per opening, with whole-house packages at $8,000 – $18,000 installed. Wood-clad sits at the top of the range and vinyl at the bottom. Call (888) 419-3650 for an exact line-item quote, and estimates are free.
Every custom and geometric window we install is backed by our 730-Day Done Right Promise, on top of the manufacturer’s glass and frame warranty. If the work isn’t right, we make it right, and we put that in writing. Call (888) 419-3650 to walk through the warranty details.
Get Your Free Custom & Geometric Windows Estimate in Antioch
A special-shape window is a design decision and a construction decision at once, and the only way to price it honestly is to stand at the opening. Call (888) 419-3650 and a live person answers, day or night, to book a free on-site estimate for Custom & Geometric Windows in Antioch. We’ll measure, show you samples of frame and glass options, and hand you a written line-item quote with the permit scope spelled out. From foundation to finish line, one contractor.
Written by the team at Groundwork Construction Co. of Antioch.