Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Clayton, CA: What It Takes and What It Costs
Door installation in Clayton, CA usually runs $1,200 to $6,500 for a single entry or interior door, and most jobs are finished in one to two days once the door is on site. A custom carriage-house door with new framing, finish and a smart opener can push past that range; a straightforward interior swap sits near the bottom. Whatever the door, the first call is (888) 419-3650, and the estimate is free.

How we run a door install, from first measure to final walkthrough
Every door job follows the same five stages. The order doesn’t change, and knowing it is how you plan your week.
Stage 1: Measure and scope (day 1, about 90 minutes). We check the opening, the wall thickness, the floor level and whether the existing frame is square. In Clayton’s custom homes on a slope, a door in a slightly racked frame is common, and that single measurement decides whether this is a swap or a re-frame. You decide the door style and material at this stage, or hold it until we’ve quoted both paths.
Stage 2: Order and confirm (3 to 8 weeks depending on the door). Stock doors arrive in days. A custom carriage-house door, a Marvin or Andersen unit, or anything with a specialty finish takes longer. You sign off on the line-item quote here, and any lead-time deposit passes through. Nothing gets ordered until you approve it in writing.
Stage 3: Prep and demo (first on-site day, 2 to 4 hours). The old door, trim and hardware come out, and we inspect what’s behind the frame. On older Clayton homes, that’s where we find soft sill wood or a header that needs sistering. We stop and show you before we go further, so the number you agreed to holds unless the wall itself is a surprise.
Stage 4: Set, shim and seal (the same day, 3 to 5 hours). The new door is set, shimmed plumb, fastened and sealed. We plane or adjust as needed so it closes with one finger and doesn’t rub. Finish work, trim and hardware follow.
Stage 5: Inspect and hand off (final day, 1 to 2 hours). If the job required a permit, the inspection is scheduled here. We walk the door with you, demonstrate the hardware, and hand over the 730-Day Done Right Promise in writing. If anything’s off in the first two years, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that actually shape a Clayton door project
Most of the cost and the long-term satisfaction come down to a handful of picks. Here’s what you’re choosing between.
- Entry door material. Fiberglass resists the Diablo winds and summer heat and holds a finish well; steel is tougher and cheaper but dents; solid wood gives the warmest look and needs periodic refinishing. Wood suits a custom carriage-house aesthetic, fiberglass suits low upkeep.
- Interior door grade. Hollow-core is light and affordable for closets; solid-core damps sound between rooms and feels substantial in a primary suite. The upgrade is worth it where privacy matters.
- Frame and jamb. A stock pre-hung unit goes in fastest; a re-framed opening costs more but fixes an out-of-square doorway that would otherwise never close cleanly.
- Hardware and finish. Lever vs. knob, finish grade, and a lockset that matches a smart-home setup. A smart deadbolt integrates with your existing system and adds a keyless entry layer.
- Whisper-quiet and smart openers. For carriage-house and garage entries, a belt-drive opener with smart-home integration runs far quieter than a chain drive and lets you control and monitor the door from your phone. This is a premium upgrade that most Clayton buyers on custom homes ask about.
Match the door to the house, not to a catalog. A carriage-house door on a mid-century ranch in the flat core reads heavy; on a 1990s custom home with a raised foundation, it completes the facade.

See the difference
Before
After
Before
After
Before
AfterWhat Door Installation costs in Clayton, CA
Door installation in Clayton lands between $1,200 and $6,500 for a typical single door, and higher for custom entry systems with new framing and an opener. Five things push the number from the low end to the high end:
- Door type and material. A stock hollow-core interior door sits low; a solid wood or custom carriage-house door sits at the top.
- Opening condition. Swapping into a sound frame is fast. Rotted sill, a racked frame or a header that needs work adds labor and a re-frame.
- Size and configuration. Standard single doors are cheapest; double doors, sidelights and oversized openings climb.
- Hardware and smart integration. A basic knob and deadbolt are minimal; a smart lockset or a whisper-quiet integrated opener is a separate line.
- Permit scope. An interior swap rarely needs one; a new exterior opening or a structural change does, and that adds inspection time and cost.
A written estimate from us lists each of these as a line item. What’s included: removal and disposal of the old door, setting, shimming, sealing, trim and hardware install. What’s typically not unless we quote it: interior repainting, structural repair if the wall surprises us, and specialty finish that has to cure on site. No-hassle upfront pricing means the number you see is the number you pay. Call (888) 419-3650 for an exact quote.
What Clayton homes specifically do to a door install
Clayton sits at the base of Mount Diablo, and the housing stock splits cleanly: mid-century ranch homes in the flat core, and 1980s to 2000s custom homes built on steep lots with raised foundations, decks and retaining walls. That second group is where most of our door work happens, because a custom home door is expected to match the original design and the hardware has to integrate with the rest of the system. The expansive clay soils here swell and shrink through the seasons, so exterior doors commonly stick in summer and gap in winter. That’s a frame-and-seal issue, not a door issue, and we plan for it. Add in steep, fire-prone hillsides and narrow winding roads up the hillside neighborhoods, and defensible-space compliance shapes the exterior trim and materials we specify. Many Clayton homes were built before modern fire codes, so a simple entry-door replacement can turn into an upgrade once we open the wall. Call (888) 419-3650 to walk through your door and get a free estimate.
Serving Clayton, CA – Our Local Coverage Area
We serve Clayton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked about door installation in Clayton
Most single doors are installed in one to two days once the door is on site, with the order lead time of up to 3 to 8 weeks being the longer wait for custom units. The on-site work itself is quick; the schedule depends on the door. Call (888) 419-3650 for an estimate.
An interior door swap generally doesn’t require a permit, but a new exterior opening or a structural change does, and permits are pulled and inspections passed on those jobs. We’ll tell you upfront which path your door falls on before work starts. Call (888) 419-3650 to confirm.
Yes in most cases, a straight door swap doesn’t touch plumbing or framing, and we only open the wall if the frame is out of square or the header is soft. When structural work is needed, we show you before we proceed. Call (888) 419-3650 for an estimate.
A custom carriage-house door with new framing and a whisper-quiet smart opener sits at the higher end of the $1,200 to $6,500 range, or above it for oversized configurations. A stock interior door sits near the low end. Call (888) 419-3650 for a line-item quote.
Every door we install is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right, for two full years. That’s backed in writing, not advertised. Call (888) 419-3650 for a free estimate.
Need a door installed right in Clayton? We come out for a free on-site estimate, measure the opening, and hand you a written line-item quote with no surprises. Homeowners often pair a door project with Windows & Doors in Clayton work, and we also handle a wide range of exterior projects across Clayton, from Chain Link Fence in Clayton to Vinyl Fence in Clayton. It’s all part of Windows & Doors, delivered by background-checked, uniformed technicians. Call (888) 419-3650 to schedule your free estimate and get the 730-Day Done Right Promise behind it.
Written by the team at Groundwork Construction Co. of Antioch.