Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterFence Gates in Antioch, CA
A fence gate in Antioch typically costs $350 to $1,200 installed, depending on width, material and hardware, and most gates are built and hung in a single day. It’s the one part of a fence that has to work every single time: it swings, it latches, it holds a dog in and a stranger out. A fence line can be perfectly set and still fail at the gate if the posts aren’t braced or the hinges are undersized for the span.
We build and hang gates as part of our Fence Installation in Antioch work, and we treat the gate as its own project. That means a deeper post, a frame built to resist sag, and hardware sized to the actual weight of the leaf. If you’ve got a gate that drags, won’t latch, or has started to lean, you can reach us at (888) 419-3650 and we’ll tell you straight whether it’s a repair or a rebuild.
Groundwork Construction Co. of Antioch has been in business since 2014, and our technicians have up to 12 years of experience with every fence style common to this part of Contra Costa County. Every gate we hang is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right.
Why gates fail faster than fences in Antioch
Antioch sits in a wind corridor that funnels through the Delta, and the gate is the one solid panel on a fence line. On a windy afternoon off the river, a 5-foot-wide gate on a 6-foot fence catches more load than any other section. Add the clay-heavy soil that swells in winter and shrinks hard by August, and a post that was plumb in February can tilt by fall. We set gate posts deeper and brace them harder than a standard line post because we’ve watched what a full season of Antioch weather does to a gate that wasn’t built for it.
When You Need Fence Gates
Most calls we get about gates fall into a handful of situations. If any of these sound familiar, the gate is telling you something.
- The gate drags on the ground or won’t close. That’s usually a post that’s moved or hinges that have pulled loose from soft wood. In Antioch’s clay, a gate post that wasn’t set deep enough will shift after the first wet winter, and once it does the latch geometry is off for good.
- You’re fencing a yard for a dog and need a gate that stays shut. A self-closing hinge and a proper latch matter more than the fence style. We see a lot of properties around the Lone Tree Way corridor where the dog found the gap under a sagging gate within a week.
- You need a wider gate for a trailer, RV or boat. Standard pedestrian gates run 3 to 4 feet; a drive gate for a trailer often needs 10 to 14 feet, sometimes split into two leaves. That changes the posts, the frame and the hardware entirely.
- You’re replacing a rusty chain-link gate but keeping the fence. Common on older properties near the Antioch waterfront, where salt air off the river eats galvanized frames faster than inland. A new gate can usually be hung on sound existing posts.
- You want a side-yard gate that matches the fence, not a hardware-store panel. A gate built from the same cedar, redwood or vinyl as your fence line looks like part of the fence, not an afterthought bolted on.
- Your pool area needs a gate that latches on its own. Pool safety gates need a self-closing, self-latching hinge that a small child can’t defeat, and the latch height and release mechanism are specific. We build to those requirements.
Our Fence Gates Process
We don’t hang a gate and hope. Here’s how a gate project actually runs, from the first call to the final swing test.
- Free estimate and on-site measure. We come out, measure the opening, check what the existing posts are anchored in, and look at the swing direction and grade. A gate on a slope needs a different frame than one on flat ground, and that shows up the moment we’re standing on the property. You get a written, upfront price before anything starts.
- Material and hardware selection. You choose the gate material to match your fence: cedar, redwood, pressure-treated pine, vinyl, or a metal frame with wood infill. We size the hinges, latch and frame to the weight of the leaf. A wide gate on cheap hinges sags, so the hardware decision is part of the price, not an upgrade later.
- Post setting and bracing. Gate posts get set deeper than line posts. We brace the hinge-side post against the load of the swinging gate so it doesn’t lean over time. On Antioch’s soil, this is the step that decides whether the gate still swings clean in three years.
- Frame build and hang. We build the gate frame square and diagonally braced, then hang it with the hardware sized in step two. The latch is set to the strike, not the other way around, so the gate closes flush every time.
- Swing test and adjustment. Before we leave, we open and close the gate through its full arc, check the latch engagement, and adjust the hinges or strike until it closes on its own weight without a shove. You walk it with us and confirm it.
- Cleanup and walkthrough. We clean the site, walk the gate with you, and leave the 730-Day Done Right Promise in writing. If something works loose in the next two years, you call and we come back.
Materials we work with for Antioch gates
We source from brands we’ve vetted, the same way we do across every trade. For hardscape-adjacent gates and posts, Belgard and Techo-Bloc give us paver and block options that hold up to Delta weather. For wood gates, cedar and redwood resist rot better than pine and look right against a natural fence line. Vinyl gates come in matched colors so the gate and fence read as one continuous run. If you’re weighing materials for the whole fence, not just the gate, our home page lays out how we approach a full property improvement from the ground up.
Fence Gates Pricing in Antioch
A pedestrian gate in Antioch typically runs $350 to $800 installed. A drive gate for a trailer or RV runs $700 to $1,800 depending on width, material and whether new posts are needed. Here’s what drives the number up or down.
| Gate type | Typical installed range | What moves the price |
|---|---|---|
| Standard wood pedestrian gate (3-4 ft) | $350 – $650 | Wood species, hinge and latch quality, existing post condition |
| Vinyl pedestrian gate | $400 – $750 | Width, color match to existing fence, post reinforcement |
| Wide drive gate (10-14 ft, single or double leaf) | $700 – $1,500 | Leaf weight, heavy-duty hardware, new gate posts |
| Metal frame gate (steel or aluminum) | $600 – $1,400 | Frame gauge, finish (powder-coat vs. galvanized), infill material |
| New gate posts (per post) | $150 – $400 | Depth of set, soil condition, whether old post needs removal |
| Pool safety gate upgrade | $150 – $350 added | Self-closing hinge, self-latching hardware, latch height |
Two things push the price up more than people expect. The first is a bad hinge-side post. If the post has heaved or rotted, we can’t hang a gate on it, and a new post set in concrete changes the scope. The second is width. A 14-foot drive gate needs heavier frame and heavier hardware than two 7-foot leaves, and on a windy ridge that hardware is what keeps the gate true.
We price upfront and we stick to it. The number you see is the number you pay, and there’s no surprise line item for hardware that shows up after the fact. Any project over $10,000 gets $1,000 off, and we offer 0% financing for 18 months so a gate isn’t a cash-flow problem in the middle of a larger fence or yard project.
Call (888) 419-3650 for a free estimate. We’ll come out, measure the opening, and give you a real number the same day.
Should you repair the gate or replace it?
If the posts are solid and the frame is sound, a hardware swap and a re-hang usually solves it for a fraction of replacement cost. If the post has moved, the frame is racked, or the wood is soft at the hinges, a rebuild will outlast a patch. On our estimate visit we’ll tell you which one you’re actually looking at, and we won’t sell you a new gate when a hinge adjustment gets you another five years.
Can you match a gate to an existing fence?
Yes. We match species, picket profile, height and finish so the gate reads as part of the fence line. When the original material is discontinued or the fence has weathered, we can build from the same stock and stain to match, or use a compatible profile. Bring us a photo or let us measure on-site and we’ll confirm what’s achievable before you commit.
FAQs – Fence Gates
How much does a fence gate cost in Antioch?
A standard pedestrian gate in Antioch costs $350 to $800 installed, and a wide drive gate runs $700 to $1,800 depending on width, material and whether new posts are needed. Hardware quality and post condition are the two biggest factors. Call (888) 419-3650 for an exact quote; estimates are free and we give you a written price upfront.
Can you come out today for a gate estimate?
We can usually schedule an estimate within a day or two, and a live person answers our phones 24 hours a day, 7 days a week, so you’re never stuck in a voicemail loop. During busy fence season in Antioch, same-week visits are the norm. Call (888) 419-3650 and we’ll find a slot that works around your schedule.
Why does my gate keep sagging?
Most sagging gates trace back to a hinge-side post that wasn’t set deep enough, or a frame that wasn’t diagonally braced. Antioch’s clay soil and Delta wind put more load on a gate than it was built for, and standard hardware on a wide leaf will pull loose over time. We check the post and frame first, then fix the root cause instead of re-hanging a gate that will just sag again.
Do you build pool safety gates that meet code?
Yes. Pool safety gates need a self-closing, self-latching hinge that a small child can’t defeat, and the latch has to sit at the height and release mechanism the code specifies. We build and hang to those requirements and test the swing and latch before we leave. Call (888) 419-3650 and we’ll walk you through what your pool area needs.
What’s covered under the 730-Day Done Right Promise?
Our workmanship on the gate frame, hang and hardware install is covered for 730 days. If anything we built or hung fails during that window, we come back and make it right. It’s one of the longest workmanship guarantees in the residential construction space, and it’s in writing.
Do you offer financing for a fence gate project?
Yes. We offer 0% financing for 18 months and $1,000 off projects over $10,000, so a gate can be bundled with a larger fence or yard project without paying the full cost upfront. We’ll lay out the terms during your free estimate. Call (888) 419-3650 and we’ll figure out what works for your budget.
How long does it take to install a gate?
Most gates are built and hung in a single day. A wide drive gate or a gate that needs new posts set in concrete may take two days, since the concrete needs to cure before we hang the leaf. We’ll give you the timeline on the estimate so you can plan around it.
Our technicians are background-checked and arrive in uniform, and our calls are answered by a live person 24/7. That’s not a talking point; it’s how every job runs. From the first measure to the final swing test, you’ll know who’s coming and what it costs before a single post goes in the ground. We’ve been in business since 2014 and we stand behind every gate with the 730-Day Done Right Promise.
Call (888) 419-3650 for a free estimate and a straight answer on whether your gate needs a repair or a rebuild.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch.