Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow to Measure a Window for Replacement in Antioch, CA
You measure the rough opening, not the glass and not the old frame. Take the width at the top, middle, and bottom and the height at the left, center, and right, then use the smallest number from each set. That single rule is the short answer. If you measure the visible glass or take the old sash size, you’ll be ordering a window that doesn’t fit the hole. Order it wrong and you eat a restock fee plus a return trip. Call Groundwork Construction Co. of Antioch at (888) 419-3650 for a professional pre-measure before you order a single unit.
Why the Frame You See Isn’t the Frame You Measure
Most homeowners do the logical thing: run a tape across the glass, write it down, and hand it to a supplier. That’s the wrong number. In Antioch’s 1950s to 1970s ranch tract homes on the flats, the original aluminum frames weren’t installed with precision. Crews shimmed them into whatever the rough opening gave them, and those openings often don’t match any stock modern dimension.
So when you measure the aluminum frame edge to edge, you’re measuring a shimmed, out-of-square installation, not the actual structural opening. A supplier builds to that number and the new unit arrives too tight, too loose, or out of plumb. This is the mistake that turns a straightforward replacement into a custom order and a second visit.
The three measurements that actually matter
- Width: measure at the top, the middle, and the bottom of the opening. Use the smallest of the three.
- Height: measure at the left, center, and right. Again, use the smallest.
- Depth: check the wall thickness from interior trim to exterior finish, since stucco and siding add real inches.
Take the smallest dimension every time because openings are rarely square. If you measure only the wide spot, the new frame won’t clear the tight spot. Recording all six numbers plus the depth gives a contractor exactly what they need to spec the unit.
Insert vs. Full-Frame: The Deduction Is Different
Once you have the rough opening, the deduction you apply depends on the replacement type. For an insert replacement (a new sash and frame set inside the existing frame), you measure the existing frame’s inside dimension, not the rough opening, and the supplier builds to that. For a full-frame replacement (pulling the whole window including the old frame), you measure the rough opening and the supplier builds to that minus a small allowance for shimming and sealing.
Mixing the two is where measurements go sideways. If you hand a full-frame supplier an insert measurement, or the reverse, the window won’t fit either way. Most Antioch homeowners end up in full-frame territory because the original aluminum frames are past saving, so the rough opening number is the one that counts.
The Stucco Reveal Problem in Antioch’s Ranch Homes
Antioch’s flats are full of stucco-clad ranch houses, and stucco depth varies from wall to wall, sometimes from window to window on the same house. Measure from inside and you get one number. Measure from outside and you often get a different one, because the stucco coat sits proud of the sheathing by an inch or more in places.
You need both. An inside measurement alone tells a supplier how big the hole is, but not how the new window will sit against the exterior finish or whether the trim will land cleanly. Hand a contractor the inside width and height plus the outside reveal depth and they can spec the unit and the trim package in one pass instead of guessing.
What a Pro Pre-Measure Catches That Your Tape Won’t
A tape measure tells you dimensions. It doesn’t tell you whether the frame is plumb, whether the sill plate is rotted, whether water has been getting in behind the stucco, or whether the rough opening has shifted. Those are the things that turn a “simple” replacement into a real project, and they’re the reason ordering before a professional look is a gamble.
Groundwork’s background-checked technicians run a full assessment before any order is placed: checking frame plumb and square, probing the sill plate for soft wood, looking for moisture intrusion and staining at the sill, and confirming the rough opening is structurally sound. On a Delta-facing wall, that moisture check matters, since the river winds drive rain sideways into the gaps around older frames.
Get this wrong and the price advantage evaporates. A wrong measurement means a wrong order, a return trip, and a restock fee that eats the savings. Groundwork’s upfront pricing includes the professional measure, so the quote you approve is the quote that holds. That’s part of the 730-Day Done Right Promise: if it’s not done right, we make it right.
Common Local Scenarios
A 1962 ranch near downtown. Original aluminum sliders with shims behind the frame, a rough opening that’s 1/4-inch off square, and a sill that shows old water staining. The fix is a custom-size insert or full-frame unit, not a stock size off the shelf.
A stucco wall facing the Delta. The outside reveal measures wider than the inside opening, and the wind-driven dust has packed into the weep gaps. Both measurements and a trim plan are needed before ordering.
A home where a prior owner replaced one window. The replacement was ordered to the wrong size and shimmed to fill the gap, which now leaks. Catching that during a pre-measure keeps you from repeating the mistake.
For the wider picture on window brands and options, see our Windows & Doors in Antioch page, and if you’re planning a broader exterior project, start at our home page.
How Much Does Window Replacement Cost in Antioch?
Replacement costs depend on unit size, material, and whether you’re going insert or full-frame. These are the market ranges homeowners in Antioch should expect, and the professional measure is included in the quote:
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500-$15,000 |
| Impact Window Installation | $8,000-$25,000 |
| Professional measure (included in quote) | $0 |
For a real number on your house, call (888) 419-3650. Estimates are free, and the measure comes before any order is placed.
FAQs
Measure the rough opening width at the top, middle, and bottom and the height at the left, center, and right, then use the smallest number from each set and record the wall depth. Those six numbers plus the depth are what a supplier needs. If your frame is original aluminum, have a pro confirm the rough opening before you order.
Stucco depth varies across the wall, so the exterior reveal often measures differently than the interior opening. That’s normal in Antioch’s older stucco-clad ranch homes, and you need both numbers so the new unit and trim land correctly. Call (888) 419-3650 and we’ll confirm the right measurement for your wall.
No. The glass size tells you nothing about the rough opening or whether the old frame is shimmed and out of square. In mid-century Antioch homes, the rough opening is frequently non-standard, so a stock unit usually won’t fit cleanly. A professional pre-measure tells you whether you need a custom size.
Yes. A wrong order means a return trip and a restock fee that can erase any price advantage from shopping around. Groundwork’s upfront pricing includes the measure, so you’re not paying twice. Call (888) 419-3650 for a free estimate before you order.
If you’d rather have it looked at, Groundwork Construction Co. of Antioch offers a no-pressure assessment in Antioch. We’ll measure, check the frame and sill, and tell you exactly what size unit you need. Call (888) 419-3650.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch, CA.