Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Windows & Doors in Antioch: What the Job Actually Involves
Impact windows and doors in Antioch typically run $8,000 – $25,000 for a whole-house package, and most single-family installs take two to four working days once the units are on site. You’re buying laminated or laminated-plus-polycarbonate glass in reinforced frames rated to resist wind-borne debris, mounted in openings that have to be squared, flashed, and sealed correctly on homes that are often 50 to 70 years old. Call (888) 419-3650 for a free on-site estimate on your Antioch property.

A Delta-Edge House, a 1962 Slider, and Why We Start With the Opening
The call we get most from the Antioch flats goes something like this: a ranch house off A Street or down near the river, original aluminum sliders from the early 1960s, and a homeowner who watched a Delta windstorm push water past the tracks again last winter. They want impact glass. What they don’t know yet is that the old opening is the real project.
Houses built in that era were framed for single-pane units that weighed a fraction of what impact glass does. The header may be undersized for the new load, the rough opening is rarely square after sixty years of clay soil movement, and the original flashing is usually a strip of tar paper that quit doing its job decades ago. We’ve pulled sliders in Antioch where the sill was rotted through and the stucco behind it was holding the whole assembly together. That’s not a reason to skip impact windows. It’s a reason to scope the job honestly before anyone signs.
On the newer hill subdivisions south of Highway 4, the story flips. Those 1990s and 2000s homes have square openings and modern framing, so the work moves faster and the cost lands closer to the low end. Same product, different house, different number.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
How We Run an Impact Window & Door Install in Antioch
Five stages, and you make a decision at each one.
1. Measure and opening inspection (day 1, about 2 hours)
We measure every opening, check the header and sill for rot or deflection, and photograph what’s behind the trim. On older Antioch homes this is where we find out whether a “simple swap” is actually a reframe. You decide right here whether to replace the whole unit or move to an insert-style install where the existing frame is sound.
2. Product selection and order (day 1, about an hour with you)
Glass package, frame material, grid pattern, hardware finish, and door swing all get locked in. You sign off on a line-item quote so there are no change orders later. Order lead time on impact units is usually four to eight weeks depending on the manufacturer and whether you pick a stock or custom size.
3. Permit and HOA approval (weeks 1 – 3)
Window and door replacements that change the opening size or alter the exterior appearance need a permit through the City of Antioch, and hill-area HOAs frequently require architectural review of frame color and grid style. We handle the submittal and the inspection scheduling. You handle the HOA form if your association wants an owner signature.
4. Demo, reframe, and install (days 1 – 3 of the build)
Old units come out, rough openings get squared and shimmed, new flashing and sill pans go in, and the impact units are set, leveled, and anchored. This is the messiest stretch, and it’s why we seal the room off and do one elevation at a time rather than gutting the whole house in a morning.
5. Seal, trim, and final inspection (day 4, plus the city walk-through)
Foam, caulk, interior and exterior trim, and a water test on the sills before we call it done. Then the inspector signs off. We walk the job with you and hand over the manufacturer warranty paperwork in the same visit.
The Choices You’ll Actually Be Making
- Glass build-up: laminated glass with a polyvinyl butyral interlayer is the standard impact option and holds the pane together after a strike. Laminated-plus-polycarbonate costs more but adds a layer against forced entry. For most Antioch homes the laminated build is the right call; the triple-layer is worth it on ground-floor sliders facing the street.
- Frame material: vinyl is the value pick and handles the Delta heat fine. Aluminum is slimmer and suits mid-century ranch lines better, at roughly 15 – 25% more. Fiberglass sits between them and holds paint well on the sun-baked west elevations.
- Doors: impact-rated sliders and French doors come with multipoint locking and reinforced stiles. Sliders are cheaper and easier on a narrow ranch footprint; French doors give you a wider clear opening but cost more and need more header.
- Grid and finish: simulated divided lites cost extra per unit and change the whole look of a 1960s facade. A flat-faced frame in a color matched to the original trim usually reads cleaner on these houses than a decorative grid.
We install Andersen and Marvin impact-rated lines where the budget supports them, and we’ll tell you when a mid-tier product gets you the same protection for less.

See the difference
Before
After
Before
After
Before
AfterWhat Impact Windows & Doors Cost in Antioch, CA
| Scope | Typical range |
|---|---|
| Whole-house impact window package | $8,000 – $25,000 |
| Standard window replacement (non-impact) | $4,500 – $15,000 |
| Opening reframe / rot repair (add-on) | Bid per opening after inspection |
Four things push a job toward the high end here. Unit count and size is the biggest lever; eighteen openings cost far more than six. Opening condition is next, because a rotted sill and a bad header add framing and stucco repair to the ticket. Frame material moves the number 15 – 25%. And door count matters more than people expect, since an impact slider or French door runs several times the price of a fixed window.
A written estimate from us lists every opening by size, the unit spec, trim, permit fees, and disposal. What it may not cover until we open the wall: hidden dry rot, undersized headers, and stucco patch beyond the trim line. We price those separately and in writing before any work continues.
What Antioch Homes Specifically Do to This Job
The expansive clay soils along the San Joaquin River waterfront and the old flats don’t just move foundations. They move window openings. We regularly see frames that have racked out of square over decades of seasonal soil swelling and shrinkage, which means a stock-size impact unit won’t drop in cleanly and the rough opening has to be reworked. Downtown and river-adjacent blocks sit on a high water table, so sill rot is common enough that we check for it on every older home before quoting. The afternoon Delta winds that rake the flats also drive dust and rain against west-facing glass, which is exactly the elevation where homeowners ask for impact units first. Compare that to a newer hill subdivision where the framing is true and the job is mostly product, and you can see why two Antioch quotes for the same product can differ by thousands.
This is one piece of a bigger exterior package for a lot of homeowners. If you’re already planning to redo the facade, look at it as part of a full Windows & Doors in Antioch scope, and browse our Windows & Doors service to see how the pieces fit together. We cover the whole of Antioch and the surrounding Delta communities. Homeowners often pair this with Aluminum Fence in Antioch for a low-maintenance yard perimeter, and some add Iron Fence in Antioch where they want a heavier, more traditional look at the street.
Every project comes with our 730-Day Done Right Promise, and technicians on your job are background-checked and arrive in uniform. Our technicians have up to 12 years of experience on impact-rated installs.
Serving Antioch, CA – Our Local Coverage Area
We serve Antioch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Impact Windows & Doors in Antioch
Plan on two to four working days for the install itself, plus four to eight weeks of order lead time and up to three weeks for the City of Antioch permit and any HOA review. Call (888) 419-3650 and we’ll give you a real schedule based on your openings.
Yes, if the opening size changes or the exterior appearance changes, the City of Antioch requires a permit and a final inspection. Like-for-like swaps in the same opening sometimes qualify for a simpler path, and we confirm that with the city before we order anything. Call (888) 419-3650 to talk through your project.
In most cases yes, because we work within the existing openings and only reframe the perimeter when the framing is compromised. Moving a window or widening a slider is a different job that touches the header and sometimes the wall cavity. We’ll tell you which one you’re looking at during the on-site measure. Call (888) 419-3650 for a free estimate.
Whole-house impact packages here run $8,000 – $25,000, with standard non-impact replacement at $4,500 – $15,000. Unit count, opening condition, frame material, and door count are the four levers that move the price. Call (888) 419-3650 for an exact quote, estimates are free.
You get the manufacturer’s warranty on the glass and frame plus our 730-Day Done Right Promise on the installation itself, so if a seal, a flashing detail, or a fit issue shows up, we come back and make it right. Call (888) 419-3650 to schedule your free estimate.
Get a Free Impact Window & Door Estimate in Antioch
We’ll come out to your Antioch home, measure every opening, check the framing and sills, and hand you a line-item written quote with upfront pricing and no surprises. Calls are answered by a live person, 24/7, so you’re never stuck in a voicemail queue. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off. Call (888) 419-3650 to set up your free estimate.
Written by the team at Groundwork Construction Co. of Antioch.