Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Bay Point, CA: Cost, Timeline, and What the Delta Wind Does to a Fresh Install
A paver driveway in Bay Point runs $7,000 to $18,000 for most residential jobs, and a typical single-car or two-car driveway takes 3 to 5 working days from demo to final compaction. The work is excavating the old surface, building a compacted aggregate base, laying a geotextile separator, setting the pavers on a sand bed, and cutting in the edge restraint. Call (888) 419-3650 for a free on-site estimate. We’ll measure the actual square footage and give you a line-item number, not a square-foot guess.

How We Build a Paver Driveway in Bay Point, Stage by Stage
Most contractors describe pavers as “lay them on sand.” That’s the version that fails in three years. Here’s the real sequence we run.
Day 1: Demo and excavation
We tear out the existing asphalt, concrete, or gravel down to subgrade, then dig out to the depth the base course requires – typically 6 to 10 inches of compacted aggregate under a residential driveway, more where the soil is soft. On Bay Point’s bay-fill lots, that depth is often at the high end. You decide at this stage whether any drainage corrections get made while everything is open, because doing it later means tearing out pavers.
Day 1-2: Base prep and compaction
Class II aggregate goes in lifts of 3 to 4 inches, each one watered and plate-compacted before the next. This is the stage that determines whether your driveway stays flat in year eight. A soft subgrade means we may need to over-excavate and bring in engineered fill, which adds a day and a line item. We’ll flag it before we do it, not after.
Day 2-3: Edge restraint and bedding layer
We set a rigid edge restraint on the sides that don’t butt against a curb or structure – without it, pavers creep outward under wheel loads and the joints open. Then a screeded bedding sand layer goes down, 1 inch, graded to the drainage slope. You confirm the paver pattern and the layout before anything gets laid. Once the field is set, changing your mind costs money.
Day 3-4: Laying the pavers
The field goes down first, cuts last. Border courses, soldier courses, and the cuts around your garage apron and any radiused corners get made with a wet saw for clean edges. This is the visible day, and it’s the one homeowners watch. It’s also the fastest part of the job – the prep underneath is what takes the time.
Day 4-5: Compaction, polymeric sand, and cleanup
We run a plate compactor over the finished field, then sweep polymeric sand into the joints, mist it to activate, and let it cure. Then we walk the job with you and check the slope at the garage threshold, because that’s where a bad pitch shows up as water in your garage after the first real rain. Final walkthrough happens before we pull off site.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Every paver driveway in Bay Point comes down to about four decisions. Here’s what each one really means for your money and your maintenance.
- Concrete pavers vs. clay brick pavers: Concrete pavers are the workhorse – molded, color-through, and available in a wide range of shapes. They run lower on material cost and hold up well to freeze-thaw and wheel loads. Clay brick pavers cost more per square foot but age with a patina that concrete imitates rather than develops. If you want the driveway to look 30 years older in a good way, brick. If you want uniform color and the widest pattern choice, concrete.
- Paver thickness: 60mm pavers are standard for residential driveways. 80mm pavers cost more per square foot but make more sense where a heavy truck or RV parks regularly. Don’t let anyone sell you 50mm pavers for a driveway – that’s a patio spec.
- Base depth: This is the invisible cost driver. Standard residential base is 6 inches compacted. On soft bay-fill lots, we go deeper. You’ll pay more up front and save it back in ten years of not re-leveling.
- Pattern and border: Running bond, herringbone, and basketweave are the common field patterns. Herringbone interlocks the best under turning wheels. A contrasting border course adds visual definition and a modest material and labor upcharge. Belgard makes some of the more popular modular and dimensional paver lines we install.
- Drainage and slope: Pavers are permeable at the joints but not automatically a drainage solution. If your driveway pools now, we fix the grading while the base is open – putting in a channel drain or re-pitching toward the street.
What Paver Driveways Cost in Bay Point, CA
Paver driveway installation in Bay Point runs $7,000 to $18,000. That’s the range for a typical residential driveway with standard base prep, 60mm concrete pavers, and a border course. Here’s what moves a job toward either end.
- Square footage: The single biggest variable. A one-car driveway is a fundamentally different number than a long two-car drive with a turnaround.
- Existing surface and demo: Tearing out 4-inch concrete costs more than scraping up gravel. We haul off the old material, which is a real disposal line item.
- Subgrade condition: Soft, expansive, or poorly compacted soil means over-excavation and imported base. This is the most common surprise on older Bay Point lots.
- Base depth and drainage corrections: Deeper base, a channel drain, or re-grading to move water away from the garage all add to the number.
- Paver grade and pattern: Premium paver lines, 80mm thickness, and complex patterns with multiple border courses push toward the top of the range.
Your written estimate should spell out square footage, paver product and manufacturer, base depth, demo and haul-off, edge restraint, polymeric sand, and the compaction passes. What it should not hide: a “mobilization” fee or a base-prep charge that only appears once the digging starts. We quote it upfront and the number you see is the number you pay, backed by the 730-Day Done Right Promise.

See the difference
Before
After
Before
After
Before
AfterWhat Bay Point Specifically Does to a Paver Driveway Project
Bay Point is unincorporated, which changes the paperwork. Permits come through Contra Costa County, not a city building department, and that affects the inspection timeline on any driveway work that disturbs the right-of-way or ties into drainage. We handle that filing.
The bigger local factor is what’s under the driveway. Much of Bay Point’s housing stock dates to the post-WWII and mid-century tract era – older single-story homes where the original driveway was poured over whatever grading the builder left behind. On streets off Port Chicago Highway and around the older sections of the community, we routinely find soft bay-fill soil and shallow, poorly compacted base under the existing concrete. That’s the failure mode we plan for: the old driveway didn’t crack because pavers are better, it cracked because there was nothing solid underneath.
Delta wind is the second factor. Bay Point sits where the delta breezes meet the Diablo Range, and the afternoon gusts that lift shingles off roofs also push grit and debris across driveways. The polymeric sand joint system matters here more than it does inland – it locks the joints against wind-driven grit and reduces the weeding you’d otherwise be doing every spring. If your driveway is part of a full Driveway & Pavers in Bay Point project that includes a walkway or patio, we plan the whole thing in one grade so water moves the same direction across all of it.
Serving Bay Point, CA – Our Local Coverage Area
We serve Bay Point and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Paver Driveways in Bay Point
Most residential paver driveways in Bay Point take 3 to 5 working days, weather permitting. Demo and excavation take day one, base prep and compaction run into day two, and the pavers go down on days three and four with compaction and polymeric sand finishing the job. Winter rain can stretch that, which is why we schedule around the forecast rather than through it.
It depends on what the work touches. A straight replacement of an existing driveway in the same footprint usually doesn’t require a county permit, but anything that changes the right-of-way, alters drainage onto the street, or adds new impervious area may. Because Bay Point is unincorporated, the application goes to Contra Costa County. We confirm the permit scope before demo so you’re not surprised after the concrete’s gone. Call (888) 419-3650 and we’ll walk through your specific property.
Yes, in most cases. A paver driveway is surface work – it doesn’t involve plumbing, electrical, or structural changes, so your irrigation lines, gas meter, and foundation stay untouched. The one exception is drainage corrections, which sometimes require re-routing a downspout or a yard drain. We identify those during the estimate, not mid-job.
Paver driveway installation in Bay Point runs $7,000 to $18,000, and the price we quote is the price you pay. The only thing that changes it is a subgrade condition we couldn’t see until demo – and if we hit that, we stop and show you before we spend another dollar. Call (888) 419-3650 for an exact quote – estimates are free.
Our work is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years after we hand you the keys. The paver manufacturer’s warranty is separate and covers the product itself. We put both in writing before work starts.
Get a Free Paver Driveway Estimate in Bay Point
Call (888) 419-3650 to schedule a free on-site estimate for paver driveways in Bay Point. We’ll measure your driveway, check the subgrade and slope, and hand you a written line-item quote with the paver product, base depth, and timeline spelled out. A live person answers, day or night. If you’re also planning a garage-to-living-space conversion, homeowners often pair this with Garage Conversion ADU in Bay Point and want the driveway approach to accommodate a new entry – and we coordinate that scope in one plan, along with the broader Driveway & Pavers scope if you’re redoing more than the drive.
Written by the team at Groundwork Construction Co.