Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Walnut Creek: What the Job Actually Involves
Paver driveways in Walnut Creek typically run $7,000 – $18,000 and take three to six working days from demolition to the final sweep of polymeric sand. The work is excavation, a compacted base, edge restraint, then setting Belgard or Techo-Bloc units on a sand bed and cutting the borders in. Most homes we see need the old asphalt or failing concrete hauled out first. Call (888) 419-3650 and we’ll walk your slope and give you a written, line-item price before anyone touches a shovel.
How We Build a Paver Driveway, Stage by Stage
The order of operations matters more than anything else on a driveway. Get the base wrong and the pavers will telegraph every flaw within two summers. Here’s the sequence we run, and where you make decisions along the way.

Stage 1: Measure, slope check, and layout (half a day)
We shoot grades from the garage floor to the street to confirm drainage falls away from the foundation, which matters on the sloped lots common off Rudgear and the hillside streets above Ygnacio Valley. You decide the paver pattern and border color at this point, because the border dictates the cut plan. We also check whether your downspouts and any utility boxes need relocating before demo.
Stage 2: Demolition and haul-off (one day)
Existing asphalt, cracked concrete, or old pavers come out with a mini-excavator where access allows, by hand where it doesn’t. Debris leaves in dumpsters the same day so your driveway isn’t a pile for a week. If we find root intrusion or a failed subgrade under the old surface, we flag it before proceeding and price the fix in writing, not as a surprise change order.
Stage 3: Excavation and base prep (one to two days)
We dig to a depth that accommodates the paver thickness plus four to six inches of compacted Class II aggregate base. That base goes down in lifts and gets plate-compacted between each one. This is the slowest, least visible, most important part of the job. A driveway that heaves or settles almost always skipped this step. You don’t have to decide anything here; we just keep you posted on progress.
Stage 4: Setting and cutting (one to two days)
Bedding sand gets screeded, pavers go down in your chosen pattern, and the border units are wet-cut for a clean edge. We set edge restraint in concrete along the sides so the field can’t spread. You’ll walk the layout with us at the halfway mark to confirm the pattern reads the way you pictured it.
Stage 5: Joint sand, compaction, and cleanup (half a day)
Polymeric joint sand goes into the gaps, gets vibrated in, and is misted to set. We blow off the surface, wash the edges, and do a final walkthrough with you. Our 730-Day Done Right Promise sits over the whole job. If a paver settles or a joint washes out, we make it right. From foundation to finish line, one contractor, one written guarantee.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Options You’ll Actually Choose Between
Walnut Creek buyers are usually picking between a handful of real decisions. Here’s the honest trade-off on each, not a catalog.
- Concrete pavers vs. clay brick. Concrete pavers (Techo-Bloc, Tremron, Belgard all make good ones) cost less and come in more colors and textures. Clay brick runs higher and holds color longer. For most Walnut Creek driveways, a quality concrete paver is the practical pick.
- Tumbled vs. straight-edge finish. Tumbled edges look older and hide scuffs better. Straight, sharp edges read more modern but show every chip. Match the finish to the house, not to a magazine photo.
- Permeable vs. standard joint sand. Permeable systems let water drain through the surface and help on lots where runoff is tight. They cost more up front and need periodic vacuuming to stay open. Standard polymeric sand is cheaper and simpler if your grading already drains well.
- Pattern: running bond vs. herringbone. Herringbone interlocks and resists shifting on slopes, which suits the graded lots around Alamo and Clayton. Running bond is calmer visually and cheaper to lay. A border in a contrasting color ties either pattern together.
- Thickness: 60mm vs. 80mm. 60mm is fine for a residential driveway with cars and light trucks. 80mm handles heavier loads, RVs, or a slope that sees a lot of turning. On this market, 60mm is the norm; 80mm is worth the upgrade if you park anything heavy.
What Paver Driveways Cost in Walnut Creek, CA
Plan on $7,000 – $18,000 for a full paver driveway installation in Walnut Creek. A single-car driveway in good condition lands near the low end. A two-car driveway with curved borders, a slope, and tear-out of the old surface sits near the high end.
Five things move that number:
- Square footage. The biggest driver. Every extra hundred square feet adds material and labor in step.
- Existing surface condition. Asphalt or cracked concrete has to be demoed and hauled, which adds cost and a day.
- Access. A tight driveway the excavator can’t reach means more hand labor and a higher labor line.
- Paver grade and pattern. Premium lines and complex patterns cost more than a standard running bond in a mid-tier paver.
- Drainage and grading. If water needs to be redirected, that’s base work, drain lines, or a swale, quoted separately and in writing.
Your written estimate lists demo, base, pavers, edge restraint, joint sand, and haul-off as line items. What it doesn’t cover: relocating gas or water lines, structural repair to a garage slab, or city permit fees if your project needs one. We tell you up front which apply. The number you see is the number you pay, and 0% financing for 18 months is available, with $1,000 off projects over $10,000.

See the difference
Before
After
Before
After
Before
AfterWhat Walnut Creek’s Housing Stock Does to This Job
Most of the driveways we replace here sit in front of 1950s – 1970s single-story ranches and split-levels, and that era shows up in the ground. Old slabs were often poured thin, no base, and on soil that’s settled for sixty years. When we dig out, we routinely find failed subgrade or root systems that were never addressed. That’s the failure mode we see most around Rudgear and the neighborhoods off Ygnacio Valley Road. In the hills, driveways are long and steep, which pushes cost toward retaining and drainage rather than square footage. Walnut Creek’s hot, dry summers are actually good for scheduling; winter rains are not, so we tend to book exterior paving between spring and fall when the ground and the curing weather cooperate. Homes in the 94596 and 94598 ZIP codes also sometimes sit inside HOA boundaries, and those associations often have opinions on paver color and border style. We check before we order, not after. If the project grows into something bigger, homeowners often pair a new driveway with ADU Design & Permitting in Walnut Creek or a Garage Conversion ADU in Walnut Creek, since the paving crew and the permit desk can work the same site.
Our driveway & pavers service covers Walnut Creek and the surrounding Diablo Valley, and if your project is part of a full Driveway & Pavers in Walnut Creek scope, we coordinate the trades under one schedule. Everything we install follows our Driveway & Pavers standards, same specs, same warranty.
Serving Walnut Creek, CA – Our Local Coverage Area
We serve Walnut Creek and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Walnut Creek
Most residential paver driveways in Walnut Creek take three to six working days, weather permitting. A simple single-car driveway in good conditions can land in three; a large two-car driveway with tear-out and a slope can run closer to six. Rainy winter weeks can push the schedule. Call (888) 419-3650 for a timeline based on your actual site.
Usually not for a straight replacement of the same footprint, but you may need one if the driveway is being widened, regraded, or connected to a storm drain, and HOA approval can be required separately. We confirm the permit picture and any association rules before work starts. Call (888) 419-3650 and we’ll tell you what applies to your address.
Yes. Paver driveways are a surface and base project, so the work stays above the utilities unless a drain line needs to be relocated. Gas, water, and sewer lines stay put in the vast majority of jobs. If something underground has to move, we price it as a separate written line before proceeding. Call (888) 419-3650 for a site visit.
Expect $7,000 – $18,000, with the total driven mostly by square footage, access, existing surface condition, paver grade, and drainage work. A written line-item estimate tells you exactly where your number lands. Call (888) 419-3650 for an exact quote. Estimates are free.
Every paver driveway we install is covered by our 730-Day Done Right Promise. If the workmanship fails, we make it right. Your estimate spells out the coverage in writing, and our technicians have up to 12 years of experience on this kind of install. Call (888) 419-3650 with questions about coverage.
Get a Free Paver Driveway Estimate in Walnut Creek
We’ll come out, measure your driveway, check the slope and base, and hand you a written line-item estimate covering demo, base, pavers, and cleanup. No pressure, no vague ballpark. A live person answers the phone 24/7, and every technician on the job is background-checked and arrives in uniform. Call (888) 419-3650 to schedule your free on-site estimate for paver driveways in Walnut Creek.
Written by the team at Groundwork Construction Co.