Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Pittsburg, CA: What It Costs and How Long It Takes
Walk-In Showers & Shower Remodeling in Pittsburg, CA typically runs $9,000 – $28,000 for a full shower rebuild, or $4,500 – $12,000 if you’re only replacing the shower itself with no other bathroom work. Most jobs take 2 – 4 weeks from demo to final inspection, depending on whether plumbing moves. Call (888) 419-3650 and we’ll give you a written, line-item estimate for your exact shower before anything starts.

How We Build a Walk-In Shower in a Pittsburg Home, Stage by Stage
No two showers are the same, but the sequence is. Here’s what actually happens, who decides what, and when.
Stage 1: On-site measure and scope lock (day 0)
We measure the shower footprint, check the drain location, and look at what’s behind the wall. In Pittsburg’s older homes, that’s often where the surprise lives: galvanized supply lines, a drain that doesn’t line up with a modern linear drain, or framing that’s been softened by years of slow leaks. You decide the shower size (a standard 36″ x 60″ pan versus a 48″ or larger curbless layout) and whether the valve stays where it is.
Stage 2: Demo and inspection (days 1 – 2)
Tile, backer board, and old pans come out down to the studs and subfloor. This is the stage that reveals rot, mold, or a subfloor that was never properly sloped. We open the wall to the valve, confirm the drain rough-in, and bring the framing back to plumb before anything goes back in. If the existing shower was a prefab unit, removal runs faster, usually a single day.
Stage 3: Rough-in plumbing and waterproofing (days 3 – 5)
If the valve or drain is moving, a licensed plumber handles that and it gets inspected before tile. Then waterproofing goes in. On a bonded waterproofing system like Schluter’s Kerdi, the pan, curb, and walls become one continuous membrane with no seams to fail. This is the step that determines whether your shower lasts 10 years or 30, and it’s the one most cheap bids skip.
Stage 4: Tile, glass, and fixtures (days 6 – 12)
Wall tile and floor tile go in, then the shower valve trim, showerhead, and any niche or bench. Frameless glass gets templated after tile is set, so add a week or so for fabrication if you’re going with custom glass. This is when you finalize the finishes you picked in stage 1, which is why we ask you to lock those choices before demo, not during.
Stage 5: Final inspection and walkthrough (days 13 – 16)
We test the pan for drainage and the valve for temperature consistency, then walk the job with you. Punch-list items get handled the same week. Your work is covered by our 730-Day Done Right Promise from the day we finish, not the day we start.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Walk-In Shower Options You’ll Actually Choose Between
Most of the decisions that drive your price are made before a single tile is set. Here’s what matters and what each choice costs you in real terms.
- Tile versus solid surface. Porcelain or ceramic tile gives you the widest design range at roughly $8 – $25 per square foot installed. A solid-surface panel system like Sterling’s goes in faster and cleans with a wipe, but it limits your look and tops out around a dozen color options.
- Curbless versus low-curb versus standard curb. A curbless shower costs more because the floor has to be recessed into the framing and re-sloped, which can add $1,500 – $4,000. A low-curb pan gets you most of the accessibility with far less structural work.
- Waterproofing system. A bonded membrane system (Schluter, for example) runs a few hundred dollars more in materials than a traditional mortar-bed pan, and it’s the single best money you’ll spend on longevity. We won’t build a shower without one.
- Glass. Frameless glass runs $1,200 – $3,500 depending on size and hardware. Semi-frameless saves money and still looks clean. Acrylic units feel cheaper the day they’re installed and stay that way.
- Fixtures. A Grohe or Toto valve and trim set runs $400 – $900 and is worth it. Cheap valves fail at the cartridge, and replacing one behind finished tile is a miserable job.
- Bench and niche. A built-in bench adds $600 – $1,800. A recessed niche is cheap if it goes in before tile ($150 – $400) and impossible to add after.
What Walk-In Showers & Shower Remodeling Costs in Pittsburg, CA
The honest number for a full walk-in shower rebuild in Pittsburg is $9,000 – $28,000. A shower-only replacement runs $3,000 – $8,500, a tub-to-shower conversion sits at $3,500 – $10,000, and a straightforward walk-in install lands at $4,500 – $12,000. What pushes a job to the top of that range:

- Size and layout. A 36″ x 60″ alcove is the cheapest unit to build. A 48″ or larger curbless shower with a linear drain adds framing, waterproofing, and tile.
- What’s behind the wall. Rot, mold, or a subfloor that needs re-sloping in a 1940s riverfront home can add $1,500 – $5,000 before tile starts.
- Moving plumbing or electrical. Relocating the valve, drain, or adding a heated floor circuit means permits and a licensed trade, typically $800 – $2,500.
- Material grade. Standard porcelain and a semi-frameless door at the low end; large-format slab tile, frameless glass, and a linear drain at the high end.
- Permit scope. A straight shower replacement may not need one. Moving plumbing or altering framing does, and that pulls inspection into the timeline.
A written estimate from us itemizes demo, framing repair, waterproofing, tile, glass, fixtures, and permit fees separately, so you can see exactly where the money goes. Upfront pricing, no surprises. What typically isn’t included: structural surprises found after demo and any related work in the wider bathroom, which is why this often ties into a Bathroom Remodeling in Pittsburg project rather than a standalone shower job.
See the difference
Before
After
Before
After
Before
AfterWhat Pittsburg Homes Do to This Job
Pittsburg’s housing stock splits the work into two very different problems. Downtown and the old riverfront near the former steel mill and canneries hold early-1900s homes that have settled on Delta fill and clay, so what looks like a shower leak is often a subfloor that’s out of level and a drain that’s been fighting it for decades. Up on the Ridge and the other hillside subdivisions, homes sit on pads cut into expansive clay, and we regularly find sloped floors, cracking stucco, and moisture creeping in at the shower wall from wind-driven rain coming through the Carquinez Strait gap. That steady Delta breeze matters indoors too: it pushes water against exterior walls, and a shower on an exterior wall needs proper vapor management or the mold comes back no matter how good the tile looks. Permit scope runs through Contra Costa County and the City of Pittsburg, and plumbing changes get inspected. Before planning any exterior wall work, homeowners often pair this with Roof Replacement & Installation in Pittsburg or, on the hillside homes, Metal Roofing in Pittsburg to stop the moisture source at the top.
Serving Pittsburg, CA – Our Local Coverage Area
We serve Pittsburg and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Pittsburg
Most take 2 – 4 weeks from demo to final walkthrough, with 3 weeks being the common case. Custom glass fabrication, moving the drain, or finding rot after demo will push it longer. Call (888) 419-3650 for a schedule specific to your shower.
You need one if the plumbing or framing changes. A straight tile-and-fixture replacement on an existing pan often doesn’t. We confirm the scope with the City of Pittsburg before we pull anything, and plumbing changes get inspected. Call us and we’ll tell you which side your job falls on.
Yes, and most of our Pittsburg shower jobs keep the existing valve and drain locations. That keeps the cost closer to $4,500 – $9,000 and shortens the timeline by about a week. Moving the drain for a curbless layout is what pushes the price up.
A shower-only replacement is $3,000 – $8,500, a tub-to-shower conversion is $3,500 – $10,000, and a full walk-in rebuild is $9,000 – $28,000. The range comes down to size, waterproofing system, glass, fixtures, and what’s behind the wall. Call (888) 419-3650 for an exact quote; estimates are free.
Every shower we build is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If the pan leaks or the tile fails, we make it right. Our technicians have up to 12 years of experience, are background-checked, and arrive in uniform, and a live person answers the phone any hour of any day.
Get a Free Estimate on Walk-In Showers & Shower Remodeling in Pittsburg
Tell us what’s wrong with your current shower and we’ll come measure it, walk you through the waterproofing and tile options, and leave you with a written, line-item estimate. No pressure, no vague bids. We handle walk-in showers across Pittsburg and the surrounding Delta communities, and this work often fits inside a larger Bathroom Remodeling plan if you’re updating the rest of the room. Call (888) 419-3650 to schedule. Financing at 0% for 18 months and $1,000 off projects over $10,000 are available.
Written by the team at Groundwork Construction Co.