Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Replacement in Concord, CA: What It Costs and How Long It Takes
Window replacement in Concord runs $4,500 – $15,000 for a typical whole-house or large multi-room job, and most homes wrap in two to four days once materials land. The number depends on how many openings you’re replacing, the frame material, and whether the original rough openings need repair. We give free on-site estimates with line-item pricing, so you know the scope before anyone touches a window. Call (888) 419-3650 to book one.

How a Window Replacement Job Actually Runs
Most homeowners want to know where they’ll be on day two. Here’s the real sequence we follow on Concord homes, stage by stage.
1. Measure and order (the slow part, 2 – 4 weeks)
We measure every opening and confirm the frame type – wood, vinyl, fiberglass, or aluminum – plus whether you want a full-frame replacement (removing the old frame and trim) or a pocket replacement (fitting the new unit into the existing frame). Full-frame costs more but fixes rot and drafts. Then we order. Custom sizes from Andersen or Marvin take longer than stock vinyl. You decide brand and configuration at this stage, and you sign off on the written quote.
2. Prep and protection (first morning)
We lay drop cloths, mask furniture, and label each room. Old window coverings come down and hardware gets bagged. This takes a couple of hours on a normal-sized job. You clear wall access and move small valuables before we arrive.
3. Removal and inspection (day one)
Old units come out one at a time. This is where surprises surface – water damage, rotted sill plates, or that unpermitted addition nobody documented. We photograph what we find and show you before we go further. On roughly a third of older Concord homes, at least one opening needs reframing.
4. Install and seal (days one through three)
New units go in, shimmed plumb, then foam-sealed and caulked. We check operation, locks, and screens. Flash tape and exterior trim go on last. Each window takes 45 minutes to an hour-and-a-half once framing is sound.
5. Final walkthrough (last half day)
We test every window, clean glass, and haul off debris. You walk each room with us. If a screen is tight or a sash sticks, we fix it before we leave. That workmanship is backed by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Frame Materials, Glass, and Configuration: Your Real Choices
These are the decisions that move both the price and the feel of the finished job. Pick for how long you’ll stay, not just what’s cheap.
- Vinyl frames – the value pick for most Concord tract homes. Low maintenance, good thermal performance, but limited color range and less rigid on very wide units.
- Fiberglass frames – stiffer, holds paint well, expands and contracts less than vinyl in summer heat. Sits mid-range on price and suits bigger openings.
- Wood and wood-clad – Andersen and Marvin make the warm-interior units many homeowners want. Higher cost, but beautiful and long-lived if you keep up the exterior seal.
- Aluminum – slim sightlines and strong frames, common on mid-century moderns. Poor insulator unless a thermal break is built in.
- Glass packages – double-pane standard; add low-E coating and argon fill for hotter west-facing rooms. Worth it on the sunny side, marginal on shaded walls.
- Window type – fixed, single-hung, casement, slider. Casements seal tighter but swing out. Sliders are easy in tight rooms.
What Window Replacement Costs in Concord, CA
Most whole-house window replacement in Concord lands between $4,500 and $15,000. Here’s what pushes a job to either end.
- Number and size of windows – a three-window bedroom job sits at the low end; a ten-opening single-story home reaches the top.
- Frame material – stock vinyl on the low end, wood-clad or fiberglass on the high end.
- Existing condition – rotted sills, damaged framing, or a hidden unpermitted addition adds labor and reframing cost.
- Full-frame vs. pocket replacement – full-frame runs more because trim and framing come out.
- Glass and hardware upgrades – low-E, tempered glass near doors, premium locks and screens.
A written estimate covers materials, labor, disposal, caulking, flashing, and trim. What typically isn’t included: drywall patching inside, exterior paint touch-up, or structural repairs discovered during demo. We line-item those separately so nothing gets hidden. Ask for the free estimate and design consult before you commit.

See the difference
Before
After
Before
After
Before
AfterWhat Concord Homes Specifically Do to This Job
Concord sits where the cool fog-influenced Diablo Valley floor meets the hot inland slopes of Mount Diablo. West-facing homes lower in the valley see more marine-layer moisture on frames and sills; uphill homes near the Diablo foothills get extreme summer sun that warps vinyl and bakes old sealant to powder. Same subdivision, different failure. That’s why we spec low-E glass and thermal-break frames on the sunny side and lean toward sealed, moisture-resistant units facing the fog.
Most of the older housing stock here is post-WWII ranch, much of it original 1950s-60s single-story construction. We regularly open a wall to find single-pane aluminum windows, corroded glazing, and a hidden unpermitted addition framing the same opening. Slab foundations and shallow-pitch roofs don’t change window work, but that old framing does. In ZIP codes 94527 and 94519, we budget for reframing on more jobs than not. Seismic hardware on older walls also comes up, and we flag soft-story or unbolted foundations before we close a wall back up.
We work throughout Concord and the surrounding East Bay. Homeowners often pair this with Vinyl Fence in Concord for a yard refresh, or spread the budget across a full Windows & Doors in Concord scope. Call (888) 419-3650 and we’ll assess your specific failure pattern on site.
Serving Concord, CA – Our Local Coverage Area
We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Window Replacement in Concord, CA
Most Concord homes are done in two to four days once materials arrive. The lead time for fabrication is what adds weeks before that, so plan for a four-to-six-week window from order to completion on stock units. Call (888) 419-3650 for a scheduling estimate on your job.
Replacing windows in an existing wall of the same size usually doesn’t require a building permit. Altering the rough opening or adding new openings does. We pull permits when the scope calls for it and walk you through the inspection process. Call (888) 419-3650 to check your situation.
Yes – window openings sit in the wall, so plumbing and structural work generally stays untouched. Repairs happen only if we find rotted framing or water damage behind the old unit. We disclose that before proceeding.
Most jobs land between $4,500 and $15,000, with the number driven by window count, frame material, and how much reframing your old openings need. Call (888) 419-3650 for a free line-item estimate.
Our labor and workmanship carry the 730-Day Done Right Promise – if it’s not right, we make it right. That’s on top of the manufacturer’s warranty on Andersen or Marvin units, which we register for you.
Ready for a Window Replacement Quote in Concord?
We give free on-site estimates with line-item pricing, background-checked uniformed technicians, and no surprise change orders. Call (888) 419-3650 and a live person answers any hour – you’ll get scheduling options and a clear scope, not a sales script. Ask about our $1,000 off projects over $10,000 and 0% financing for 18 months. Estimates are free.
Written by the team at Groundwork Construction Co.