Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tile Roofing in Brentwood, CA: What the Job Actually Involves
Tile roofing in Brentwood, CA means removing the old covering, inspecting and repairing the underlayment and sheathing, then installing a clay or concrete tile system built for a hot inland climate. Most full tile roofs run 4 to 9 days on a typical Brentwood tract home, and tile roof repair costs $600 – $2,500 while a full roof replacement runs $8,000 – $20,000 depending on the tile, size, and how much decking has to be replaced (metal runs higher, $15,000 – $40,000). Call (888) 419-3650 for a free on-site estimate and a written line-item quote.

Our Process for Tile Roofing in Brentwood, Start to Finish
Tile roofing fails from the bottom up. The tile itself can look fine for decades while the underlayment beneath it has long since baked through. That’s why our process starts with what’s under the tile, not the color of it.
Stage 1: Inspection and moisture test (day 1, 1 – 2 hours). We walk the roof and the attic, checking the underlayment, decking, flashing at walls and vents, and any soft spots in the sheathing. We take photos and send them to you. You decide right here whether this is a repair or a full tear-off.
Stage 2: Written estimate and material selection (day 1 – 3). You get a line-item quote, not a lump sum. At the same time you pick the tile: clay barrel, concrete flat, or a synthetic profile. This is the decision that moves your budget the most.
Stage 3: Tear-off and decking repair (days 2 – 4, 1 – 3 days). The crew strips the old tile and underlayment, hauls it off, and replaces any rotted sheathing and fascia. If we find structural damage, we stop, show you, and get written approval before adding it to the scope. No change orders that appear after the fact.
Stage 4: Underlayment and flashing (days 4 – 6, 1 – 2 days). This is the part nobody sees and the part that decides whether the roof lasts. We install a high-temp underlayment rated for the heat load a tile roof carries, plus new flashing at every penetration and wall transition.
Stage 5: Tile install and final inspection (days 6 – 9, 2 – 3 days). Tile goes down, valleys and ridges are finished, and the crew cleans the site. We walk the finished roof with you and document it. Every project is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Tile Roofing in Brentwood
- Clay barrel tile. Classic Mediterranean look that fits Brentwood’s Spanish-style tracts. Holds color for decades and shrugs off the inland heat, but it’s the heaviest and priciest option and can need structural review on older framing.
- Concrete flat or low-profile tile. The workhorse choice for most Brentwood homes. Cheaper than clay, widely available, and holds up well to Delta winds. It does absorb more heat and the color range is narrower.
- Synthetic tile. Lightweight, which can save you money on structural reinforcement, and it’s rated well for high wind. It’s newer, so long-term performance in extreme heat is still being proven.
- Underlayment grade. Don’t skip past this one. A high-temp synthetic underlayment costs more up front and is the single biggest factor in how long your tile roof lasts.
- Color and profile. Barrel, S-tile, or flat. This is a looks decision, but check HOA approval first, because many Brentwood tracts lock the color.
What Tile Roofing Costs in Brentwood, CA
Tile roofing in Brentwood runs $8,000 – $20,000 for a full replacement, and $600 – $2,500 for tile roof repair. Here’s what pushes a job toward the low or high end:
- Roof size and pitch. Square footage and steepness drive labor. A two-story with a steep pitch costs more than a single-story.
- How much decking needs replacing. Rotted sheathing adds material and labor fast.
- The tile itself. Concrete is cheaper than clay; synthetic sits in between.
- Flashing and penetrations. Skylights, chimneys, and complicated wall transitions add line items.
- Permit scope. Every Brentwood job gets a written quote with the permit line broken out, so you see exactly what the city charges.
A written estimate covers tear-off, haul-away, underlayment, tile, flashing, and permit fees. It typically doesn’t cover structural framing repair or skylight replacement unless those are scoped in. Upfront pricing, no surprises – the number you see is the number you pay.

See the difference
Before
After
Before
After
Before
AfterWhat Brentwood Homes Specifically Do to This Job
Brentwood is a fast-growing edge city in eastern Contra Costa County, and its housing stock is overwhelmingly new: big tracts of 1990s – 2020s Mediterranean and Spanish-style stucco homes, plus custom ranchettes on multi-acre lots and only a small core of older downtown bungalows. That matters for tile roofing because the tile on most Brentwood homes is original to the build, and the underlayment under it is now 25 to 35 years old and past its service life even where the tile still looks sound.
The climate compounds it. Summer highs over 100°F and persistent Delta winds bake that underlayment and crack the stucco at wall transitions, which is where we find the most leaks. If the project grows into full roof work, that’s part of a Roofing in Brentwood scope; you can also see our Roofing service for the wider picture. We cover all of Brentwood and the surrounding areas. And if you’re already replacing the roof, homeowners often pair this with Energy-Efficient Windows in Brentwood or Impact Windows & Doors in Brentwood to cut the heat load at the same time.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tile Roofing in Brentwood
Most full tile roof replacements run 4 to 9 days, and tile repairs finish in a day or two. Timing depends on roof size, how much decking needs replacing, and whether Brentwood’s building department inspection slots line up with the schedule. Call (888) 419-3650 for a timeline based on your actual roof.
Yes, a full roof replacement in Brentwood requires a permit and inspection, and a repair may or may not depending on scope. We pull the permit and pass the inspection as part of the job, and the permit fee shows up as its own line on your written quote. Call (888) 419-3650 to find out what your repair needs.
In almost all cases, yes. The work happens on the roof, so ceilings, walls, and plumbing stay untouched – unless we find rotted sheathing or framing that needs attention, which we show you and get written approval to fix. Call (888) 419-3650 for an inspection.
Tile roof repair runs $600 – $2,500, and a full replacement runs $8,000 – $20,000. The number depends on where the leak is, how many broken tiles need matching, and whether the underlayment under that section is still good. Call (888) 419-3650 for an exact quote – estimates are free.
Every tile roofing project we do is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s on top of the manufacturer warranty on the tile and materials. Call (888) 419-3650 to schedule your free estimate.
Get Your Free Tile Roofing Estimate in Brentwood
Call (888) 419-3650 and a live person answers, any time, day or night. We’ll schedule a free on-site inspection of your tile roof, test the underlayment, and send you a written line-item quote with the permit and materials broken out. No pressure and no sales pitch, just a clear number and a timeline. Financing is available at 0% for 18 months.
Written by the team at Groundwork Construction Co..