Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Brentwood: What You’re Actually Buying
An aluminum fence in Brentwood usually runs $4,000 – $10,000, with most residential jobs landing between $3,500 and $9,000 for a standard side or backyard run. Aluminum arrives pre-finished, so there’s no staining, no rot, and no repainting every few years the way wood demands in this heat. Most installations take two to four days from layout to final walk-through, and HOA approval is the step that eats the calendar, not the build. Call (888) 419-3650 to schedule a free on-site estimate and we’ll measure the actual run before quoting.

Day by Day: How an Aluminum Fence Goes In on a Brentwood Lot
Aluminum fencing looks simple from the street. The difference between a fence that’s still plumb in ten years and one that leans after two summers is all in what happens underground and how the posts are set into Brentwood’s expansive clay. Here’s the sequence we run.
Stage 1: Site visit and layout (day 1, 1 – 2 hours). We walk the property line, confirm where the fence actually goes, and locate utility markings before anything gets dug. You decide the run: perimeter only, or perimeter plus a gate for the side yard and RV access. This is also when we photograph the existing fence line and document the property corners, because in a tract like Shadow Lakes or Deer Ridge, the plat line and the physical fence rarely agree.
Stage 2: HOA approval (1 – 3 weeks, usually the longest step). If you’re in a Brentwood HOA, the architectural review committee wants fence height, style, color, and a site plan. We provide spec sheets and elevation drawings you can submit. You sign the application; we supply the documentation. Skipping this step is how fences get torn out.
Stage 3: Demo and post setting (day 2 – 3). Old fence comes out, posts get set in concrete footings sized for the wind load along the Delta edge. On former orchard lots, we sometimes hit old irrigation line or furrow remnants, and that adds time and a little cost. Post holes here are dug to depth and set plumb with a level checked twice, because clay movement punishes shortcuts.
Stage 4: Panels, rails, and gates (day 3 – 4). Sections go up, rails get leveled, and gates are hung with hinges adjusted for smooth swing. You decide gate hardware – self-closing, latch style, and whether you want a keyed lock.
Stage 5: Final inspection and walk-through. We check every post for plumb, every gate for alignment, and walk the line with you. Any adjustment happens before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Aluminum Fence Options You’ll Choose Between
Aluminum isn’t one product. The decisions you make here drive both the price and how the fence looks in fifteen years.
- Residential vs. commercial grade: Residential panels run thinner; commercial grade uses heavier wall thickness and larger posts. For a standard backyard, residential is fine. For a perimeter facing open space or a busy street, commercial grade holds up better to impact and wind.
- Powder-coat finish: Standard black, bronze, and white are the common choices. A quality powder coat resists chalking and fading under Brentwood’s 100°F summers; a cheap finish goes chalky within a few seasons. Ask what warranty the finish carries.
- Picket spacing and height: 4-foot, 5-foot, and 6-foot heights are typical. Tighter picket spacing costs more but reads more private and is often the HOA requirement. Pool-code fencing needs specific spacing, so tell us if a pool is involved.
- Rackable vs. stepped panels: Sloped lots need either racked panels that follow the grade or stepped panels that stay level. Racked looks cleaner; stepped is often cheaper. Brentwood’s newer lots tend to be graded flat, which keeps this simple.
- Gate configuration: Single walk gates, double drive gates, and gate operators are all options. A double gate for RV or trailer access is common on the larger ranchette lots east of town.
What Aluminum Fence Costs in Brentwood, CA
Plan on $4,000 – $10,000 for a typical residential aluminum fence, with the lead range for most Brentwood jobs at $3,500 – $9,000. A single side-yard run can come in near the low end; a full perimeter with a double drive gate pushes toward the top. Here’s what moves the number:

- Linear footage and height: Every extra foot of run and every step up in height adds material and labor.
- Grade and gauge: Commercial-grade aluminum with heavier posts costs more than residential grade.
- Gates: A single walk gate is a modest add; a double drive gate or a gate with an operator can add thousands.
- Site conditions: Orchard remnants, rocky subgrade, or a lot that needs clearing slow the dig and add cost.
- Permits and HOA submittals: Where required, these add time and a fee.
A written estimate from us breaks out linear footage, post spacing, gate count, footing depth, finish, and permit responsibility. What it won’t cover unless we flag it: utility relocation, significant grading, or removing a mature tree in the fence line. Those get quoted separately so there are no change-order surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Brentwood’s Building Reality Means for Your Fence
Brentwood is a fast-growing edge city in eastern Contra Costa County, and the housing stock shows it: large tracts of 1990s – 2020s Mediterranean and Spanish-style stucco homes alongside custom ranchettes on multi-acre lots, with a small core of older downtown bungalows. That means most of the aluminum fences we set here go around newer homes in ZIP 94513, on lots graded flat but sitting on expansive clay. Summers routinely top 100°F, and the swing between wet winters and dry summers makes that clay shrink and swell, which is why footing depth and concrete mix matter more here than on older, more stable Bay Area lots. The persistent Delta winds also load fence panels, so we set posts deeper and check rail attachment on the windward side.
On the custom lots east of town, excavating former orchard land sometimes turns up old furrow lines and buried irrigation pipe, and occasionally residual pesticide that needs special handling. If we hit any of that during a dig, we stop, document, and adjust the plan before continuing. Development here is also tightly regulated on grading and drainage, so if your fence sits near a drainage swale or on a slope, expect the county to want the plan to show how runoff stays on your property. For the wider project scope around the property, aluminum fencing is often part of a Fence Installation in Brentwood plan that ties together the perimeter, gates, and landscaping; if the front entry needs work too, homeowners often pair this with Driveway Repair & Replacement in Brentwood so the whole approach reads finished. The same logic applies out back: homeowners often pair this with Patios, Walkways & Pool Decks in Brentwood when the fence needs to frame a pool or a rear patio. Our Fence Installation service covers the full range of fence work, and we serve the whole Brentwood area, including the newer tracts along the eastern edge and the custom lots off the back roads.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Aluminum Fence in Brentwood
Most jobs take two to four working days on site, but the total timeline from signed contract to finished fence usually runs three to six weeks once HOA approval and any permit are counted. The build itself is fast because aluminum panels come pre-assembled; the delays come from approvals. Call (888) 419-3650 and we’ll map your actual timeline.
It depends on height, location, and whether the fence sits on a slope or near a drainage swale. Many standard backyard runs under six feet don’t require a permit, but HOA rules often apply even when the county doesn’t require one. We check both before any work starts and pull permits where required.
Sometimes, especially on lots with an in-ground irrigation system running along the property line. We call for utility locates first and flag irrigation lines during the site visit so you can move or cap them before digging. Sprinkler repair is not part of the fence quote, but we’ll tell you where the risk is.
Most Brentwood aluminum fence jobs fall between $4,000 and $10,000, with the lead range at $3,500 – $9,000 depending on run length, height, grade, and gates. A double drive gate or commercial-grade panels push toward the high end. Call (888) 419-3650 for an exact quote – estimates are free.
Our work is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right within that window. The manufacturer’s finish warranty on the aluminum runs separately, and we provide it in writing so you know exactly what’s covered on the material side.
Get a Free On-Site Aluminum Fence Estimate in Brentwood
We’ll come out, measure the run, check the grade and any HOA or permit requirements, and leave you with a written line-item estimate – no pressure, no vague ballpark. Prices are fixed upfront, so the number you see is the number you pay. Calls are answered by a live person around the clock. Reach us at (888) 419-3650 to schedule your free estimate.
Written by the team at Groundwork Construction Co..