Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vinyl Fence in Brentwood, CA: What It Costs and How Long It Takes
A vinyl fence for a typical Brentwood, CA backyard runs between $3500 and $9000, and most jobs are finished in two to four working days once materials land on site. The range covers everything from a short side-yard run to a full perimeter with a drive gate. The number that matters is the linear footage, the grade of vinyl, and whether we’re setting posts into Brentwood’s expansive clay or through an existing hardscape. Call (888) 419-3650 and we’ll walk your property and give you a written, line-item estimate.

How a Vinyl Fence Gets Built, Stage by Stage
Vinyl fencing looks simple from the street. It isn’t. The panels are the easy part – the post footings decide whether the fence stands straight in five years or leans with the soil. Here’s the real sequence we follow on a Brentwood job.
Stage 1: Layout and utility check (half a day). We walk the property line with you, confirm setbacks against your plat, and call in the 811 utility locate. In Brentwood’s newer tracts, irrigation lines and low-voltage landscape wiring run close to the fence line more often than homeowners expect. You decide the exact run and gate placement here.
Stage 2: Demolition and site prep (half to one day). If there’s an old fence, it comes out and gets hauled. We strip sod and root balls along the line, then grade a level path for the posts. On former orchard lots this is where we find the surprises – old furrow lines and abandoned irrigation pipe that have to be cut out before a post hole can go in clean.
Stage 3: Post holes and footings (one day). Posts go in 24 to 36 inches deep depending on height and wind exposure, set in concrete, and left to cure. This is the stage that determines the whole job’s longevity. A post set shallow in shrinking clay will heave within a couple of seasons.
Stage 4: Rails, panels, and gate (one to two days). We hang rails, set panels, and hang the gate on a reinforced post with a proper latch. You pick the panel style, height, and gate swing before this stage starts.
Stage 5: Walkthrough and cleanup (a couple of hours). We check every post for plumb, every gate for swing, and leave the site swept. Any touch-ups get noted on the spot and covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Vinyl Fence Options and How to Choose Between Them
- Panel style and height. Standard privacy panels run 4 to 6 feet. Taller runs cost more in material and deeper footings, but 6-foot is the sweet spot for most Brentwood backyards given the wind.
- Grade of vinyl. Economy vinyl is thinner and chalkier and fades faster under Brentwood’s sun. Premium vinyl with UV stabilizers holds color longer and resists cracking in triple-digit heat. You’ll pay more up front and less in replacements.
- Privacy vs. picket infill. Full-privacy panels cost more per foot than picket-style, but they block sightlines and cut down on wind load at the same time. Picket suits front-yard approaches and HOA-friendly streetscapes.
- Gate type. A standard walk gate is the cheapest option. A double drive gate needs a reinforced post and heavier hardware and adds real cost. Automated gates sit well outside the base range.
- Color and finish. White is cheapest and most common. Tan, gray, and woodgrain-look finishes cost more but read as less plastic against stucco and landscaping.
The right call comes down to how long you intend to stay and how much sun the run gets. If it’s a west-facing fence along a full-sun property line, premium vinyl pays you back; if it’s a shaded side-yard run, economy holds up fine.
What Vinyl Fence Costs in Brentwood, CA
Most vinyl fence jobs in Brentwood land between $3500 and $9000. That’s the working range for a typical residential run, and the final number comes down to five variables:

- Linear footage. A short 40-foot side yard sits at the low end. A full perimeter with a drive gate pushes to the top.
- Existing fence and site condition. Tearing out an old wood fence, hauling debris, and clearing roots adds to labor. An empty lot with easy soil keeps it lean.
- Soil and grading. Brentwood’s expansive clay means deeper footings and more concrete than sandy or loam soils, and any grading or drainage adjustments add cost.
- Material grade and style. Premium UV-stabilized vinyl and a double drive gate are the two biggest single levers.
- Permit scope. Most vinyl fence installations stay permit-exempt, but a perimeter over six feet or a fence near a drainage easement can pull in permitting and inspection costs.
Every written estimate we hand over is line-itemed: posts, panels, gates, concrete, labor, haul-away, and any permit fees broken out. What you won’t see is a surprise change order. The number on the estimate is the number you pay, with 0% financing for 18 months available and $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Brentwood’s Homes Do to This Job
Brentwood is a fast-growing agricultural-to-suburban edge city in eastern Contra Costa County. Most of the housing stock is new – 1990s through 2020s Mediterranean and Spanish-style stucco homes alongside custom ranchettes on multi-acre lots, with a tiny core of older downtown bungalows near the original main street. That means most of our vinyl fence work here is a fresh install on a lot that never had a fence, not a replacement. But new lots on former orchard land cause their own problems.
Brentwood sits on expansive clay soils that shrink hard in the summer, and the hot dry inland climate (summer highs often over 100°F) plus persistent Delta winds stress every fence line on the property. We see posts heave and lean most on the western and northern runs where the wind hits hardest. We also regularly find old furrow lines and buried irrigation pipe when we dig, which means we test the soil line before setting footings and adjust depth when we hit soft pockets. If your fence run abuts a drainage easement or runs close to a neighbor’s property line in ZIP 94513, we check grading rules too – Brentwood enforces drainage requirements that older East Bay cities don’t. Homeowners often pair this with Driveway Repair & Replacement in Brentwood to keep the front elevation consistent, or Asphalt Driveways & Resurfacing in Brentwood when the fence goes in along a driveway edge. When the vinyl fence is part of a larger yard plan, we coordinate with Fence Installation in Brentwood to keep the whole perimeter in one schedule. Our Fence Installation service covers the broader project scope across Brentwood.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions: Vinyl Fence in Brentwood
Most vinyl fence installs in Brentwood take two to four working days from groundbreaking to walkthrough. Footing cure time and the size of the run drive the spread – a short side yard can wrap in two days, while a full perimeter with a drive gate takes the full four.
Most residential vinyl fence runs in Brentwood don’t require a permit if they stay under the height limit and out of drainage easements. Runs over six feet or near a drainage easement typically do. We check your specific property before the estimate is issued and pull anything the city requires. Call (888) 419-3650 for a free site check.
We locate all utilities and irrigation before any post hole is dug, so we don’t hit anything. If landscape wiring or sprinkler lines run along the fence line, we flag it during layout and you decide whether to reroute or shift the fence. We never want to surprise you with a cut line halfway through the job.
A vinyl privacy fence in Brentwood typically runs $3500 to $9000 depending on linear footage, panel grade, gate configuration, and soil conditions. Every estimate we write is line-itemed with no hidden fees. Call (888) 419-3650 for an exact quote – estimates are free.
Every vinyl fence we install is backed by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That covers workmanship – the posts, the panels, the gate swing – for two full years. Manufacturer warranty on the vinyl material itself rides along on top of that. Call (888) 419-3650 to talk through the details before you commit.
Get a Free Vinyl Fence Estimate in Brentwood
Every Brentwood vinyl fence quote starts with a free on-site estimate. We measure the run, check the soil and layout, confirm permit needs, and hand you a written, line-item estimate the same visit – no vague ballparks. Calls are answered by a live person 24 hours a day, so you’ll never hit voicemail. Call (888) 419-3650 to schedule yours. Groundwork Construction Co. of Antioch brings background-checked, uniformed technicians and upfront pricing to every job in Brentwood.
Written by the team at Groundwork Construction Co.