Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Brentwood, CA: What It Costs and How Long It Takes
Backsplash, tile and flooring work in Brentwood typically runs $800 – $2,500 for a backsplash alone, with full tile-and-flooring packages across a kitchen landing between $14,000 and $45,000 when the job folds into a wider remodel. A backsplash by itself is usually a two-day job. Floor tile across a kitchen and adjoining hall runs three to five days depending on square footage and whether the old surface comes up. Call (888) 419-3650 and we’ll walk your space, measure it, and hand you a written line-item quote before anyone picks up a trowel.

How the Work Actually Runs, Stage by Stage
Tile is a schedule game. Get the sequence wrong and you’re re-doing waterproofing or tearing out a backsplash because the outlets landed in the wrong spot. Here’s how we run it in Brentwood homes.
Stage 1: Measure, layout, and material lock (day 1)
We template the counter, check for level, and map where every outlet, switch and appliance cutout falls on the backsplash. You pick tile, grout color, and layout pattern here, because the layout drives the order. Material lead time is the single biggest schedule variable: stock tile ships in a few days, special-order slab or hand-made ceramic can run two to four weeks. We don’t demo until the tile is on site.
Stage 2: Demo and substrate prep (days 2 – 3)
Old backsplash and flooring come out, drywall behind the splash gets patched or replaced, and floor substrate gets leveled. In Brentwood’s newer stucco homes the drywall behind a builder-grade backsplash is often thin and out of plane, so we skim and true it before any tile goes up. Skipping this step is why so many tile jobs look wavy in raking light.
Stage 3: Waterproofing and layout lines (day 3)
Floors in wet zones get a waterproof membrane. Backsplash gets a layout snapped to the counter and cabinets, not to the ceiling, because counters are what your eye reads. You confirm grout joint width and whether the tile runs behind the range hood or stops at it.
Stage 4: Setting tile (days 4 – 7)
Floor tile goes down first, then backsplash, because floor cuts need to be clean and the splash sits above finished work. Large-format floor tile takes longer per square foot than a small mosaic. This is where a 200-square-foot floor and a 40-square-foot backsplash can swallow the better part of a week.
Stage 5: Grout, seal, and walkthrough (days 8 – 10)
Grout cures, penetrating sealer goes on natural stone, and we walk the job with you under a raking light so every lippage and joint gets checked. Touch-ups happen before we call it done. Then the 730-Day Done Right Promise applies in writing: if it’s not right, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the decisions that make or break a tile job happen before demolition. Here’s the honest trade-off on each.
- Ceramic vs. porcelain floor tile: Ceramic is the budget pick and holds up fine in low-traffic rooms. Porcelain costs more per square foot but takes a beating in kitchens and entries and handles Brentwood’s hot, dry swings without the cracking ceramic shows over a moving subfloor.
- Large-format vs. small-format floor tile: Large-format (12×24, 24×24) reads clean and cuts grout lines, but demands a dead-flat substrate, and flat costs money. Small tile forgives a wavy floor and works in older downtown bungalows with a settled subfloor.
- Backsplash material: Glazed ceramic subway tile is the value play at the low end of the $800 – $2,500 range. Porcelain slab and natural stone climb toward the top and need sealing. Glass mosaic sits in the middle and shows every bit of backsplash prep underneath it.
- Grout and sealer: Epoxy grout costs more up front but resists staining in a working kitchen. Cementitious grout with a penetrative sealer is the standard choice and needs resealing.
- Layout and pattern: Straight set is fastest and cheapest. Herringbone, chevron and stacked patterns add cutting, waste and time. A patterned backsplash behind a KraftMaid or Cambria counter reads like a design choice, not an accident.
- Hard-surface transitions: Where tile meets hardwood or Luxury Vinyl Plank, a Schluter-style trim or a matching reducer keeps the edge clean. Cheaper transitions telegraph a rushed job.
What Backsplash, Tile & Flooring Costs in Brentwood, CA
Backsplash-only jobs run $800 – $2,500. Kitchen floor tile typically lands inside the wider $14,000 – $45,000 kitchen remodel band once you include tile, prep, trim and the surrounding scope. A standalone floor-and-splash package usually sits at the lower end of that range; a full kitchen with cabinets, counters and the tile to match sits at the top.
What moves the number up or down, and by how much:

- Square footage: Backsplash is 20 – 50 square feet in most Brentwood kitchens; floor tile can be 150 – 500 square feet. Floor area drives the price fastest.
- Existing condition: Tearing out a glued-down floor or a backsplash set on thin drywall adds demo and substrate repair. A clean tear-out keeps you at the low end.
- Moving plumbing or electrical: Relocating a sink line or adding an outlet behind the splash means opening the wall, patching and re-inspecting, which adds cost and a day of schedule.
- Material grade: Stock porcelain vs. special-order slab or natural stone is often a difference of thousands on the same square footage.
- Permit scope: A backsplash swap rarely needs a permit. Structural or plumbing changes inside a wider kitchen scope do, and that adds plan-check and inspection time to the schedule.
Every written quote we hand out is line-item and fixed: the number you see is the number you pay, with no change orders hiding in the fine print. The quote lists demolition, substrate prep, waterproofing, setting materials, grout, trim and cleanup. It does not include major plumbing or electrical relocation, custom fabrication not yet specified, or appliance changes that come up mid-job. Those get quoted in writing before anyone proceeds.
See the difference
Before
After
Before
After
Before
AfterWhat Brentwood Homes Specifically Do to This Job
Brentwood’s housing stock is overwhelmingly new, and that shapes the tile work in ways a San Francisco or Oakland tile crew never runs into. Most of what we see is 1990s-to-2020s Mediterranean and Spanish-style stucco construction in the tract neighborhoods off Sand Creek Road and Balfour Road, plus custom ranchettes on multi-acre lots along the eastern edge. In those newer homes the subfloor is usually solid and flat, so the tile job itself is straightforward; the real complications come from the builder-grade original installs, which use thin drywall behind backsplashes and dimensional instability in floor framing near long spans.
Where Brentwood really trips up a tile job is climate. Summer highs routinely cross 100°F, and the expansive clay under former orchard land expands and contracts with the seasonal moisture swing. That’s what cracks grout lines and pops tile edges in homes here, not poor tile. We spec a decoupling membrane under floor tile in these conditions where a cheaper install might skip it. If you’re also redoing a bathroom in the same house, homeowners often pair this with Tub-to-Shower Conversion in Brentwood or Vanities, Tile & Fixtures in Brentwood, so materials and grout colors stay consistent. If the backsplash is part of a wider Kitchen Remodeling in Brentwood project, we coordinate the tile schedule around cabinets and counters rather than the other way around. Our kitchen remodeling team runs tile alongside cabinet and counter installation so nothing waits on a different crew. Tile work across Brentwood zip code 94513 stays on the same schedule we’d run for Oakley, Discovery Bay, Antioch or Clayton, with the same clay-soil and hot-climate allowances built into the plan.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Backsplash, Tile & Flooring in Brentwood
A standard backsplash takes two to three working days from demo to grout, assuming tile is already on site. Special-order tile adds two to four weeks of lead time before the clock starts. Call (888) 419-3650 for an exact schedule after we measure.
A backsplash swap on its own typically does not need a permit. Floor tile replacement rarely does either. But if the tile work sits inside a wider kitchen project that touches plumbing, electrical or structure, the city of Brentwood will require permits, and those get pulled and inspected as part of the job. We tell you which applies on the walkthrough.
Yes, in most cases. The counter stays put, the old splash comes off, and the new tile runs from counter to the bottom of the upper cabinets. The decision point is whether the existing splash is set on drywall that’s come apart underneath; if it has, we replace that section before setting new tile.
Most Brentwood packages land between $14,000 and $45,000, with a backsplash-only job running $800 – $2,500 and floor tile priced by square footage inside that band. Material grade, existing condition and whether plumbing or electrical moves are the variables that swing the number most. Call (888) 419-3650 for a free written line-item estimate.
Yes. Every tile, backsplash and flooring install we do is covered by our 730-Day Done Right Promise: if it’s not done right, we come back and make it right. That’s one of the longest workmanship guarantees in residential construction, and it applies to grout, lippage and adhesion, not just the tile itself.
Get a Free Backsplash, Tile & Flooring Estimate in Brentwood
Call (888) 419-3650 to book a free on-site estimate for backsplash, tile and flooring in Brentwood. A live person answers around the clock, and on the walkthrough we measure the space, talk through material options and lead times, and hand you a written line-item quote on the spot. No pressure to book the job the same day. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co.