Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Oakley, CA: What the Job Actually Costs and How Long It Takes
Replacing cabinets and countertops in Oakley usually runs $14,000 – $45,000 for a full kitchen, with cabinet installation at $4,000 – $13,000 and countertop installation at $2,000 – $6,500 on their own. A straight swap in a 1990s tract home takes 2 – 3 weeks from tear-out to final caulk. Call (888) 419-3650 and we’ll walk your kitchen and put real numbers in writing.

Oakley sits on expansive clay and former Delta farmland, and that one fact changes this job more than most homeowners expect. Slab-on-grade foundations in the newer subdivisions off the Hwy 4 corridor settle unevenly, and a settled slab reads as a wavy countertop, a cabinet run that gaps at the wall, or a dishwasher that no longer slides in square. We check for that before we quote. If the floor is out of level, the fix belongs in the estimate, not in a change order three days in.
How we run a cabinets and countertops job in Oakley, start to finish
Nobody wants a vague “we handle everything.” Here’s the actual sequence, stage by stage, with the decisions that land on you and when.
Stage 1: Template and measure (day 1, about 2 hours)
We measure every wall, check plumb and level, and photograph the existing layout. You decide two things here: whether the layout stays put or the sink and range move, and whether you’re keeping the current footprint. Moving a sink or range adds plumbing and electrical work and pushes the job toward the top of the range. Keeping the footprint keeps it near the bottom.
Stage 2: Order and lead time (weeks 1 – 5)
Stock cabinets arrive in days. Semi-custom runs 3 – 5 weeks. Full custom can run 6 – 10 weeks, and the countertop fabricator can’t template until the base cabinets are set. That dependency is why a “two-week kitchen” rarely is one. You’ll lock door style, finish, box construction, and drawer hardware in this window while you wait.
Stage 3: Demo and prep (days 1 – 2 of install)
We pull the old cabinets, disconnect the sink and disposal, and protect the flooring. This is also where surprises surface: water damage under a sink, a wall that isn’t flat, or a settled floor section. We document what we find and tell you before we build on top of it.
Stage 4: Cabinet set (days 2 – 4)
Base cabinets go in first, shimmed and leveled, then uppers, then filler panels and crown. Doors and drawers go on last so nothing gets knocked around during the countertop phase. You’ll confirm hardware placement and any pull-out inserts before the final screw goes in.
Stage 5: Countertop template and install (days 5 – 12)
Stone gets templated after the cabinets are set, then fabricated and installed, typically 5 – 7 days later. Laminate and butcher block can go in the same week. Sink cutout, faucet, and final caulk finish the run. We walk the job with you at the end and hand over the workmanship guarantee in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The material and spec choices you’ll actually make
This is where the budget moves most, and where honest trade-offs matter more than a brand name on a sample board.
- Cabinet boxes: stock, semi-custom, or custom. Stock is the fastest and least expensive and fits standard wall dimensions. Semi-custom adjusts widths and depths and is the sweet spot for most Oakley kitchens. Custom fits odd spaces and older ranch layouts near Main Street, at the highest cost and longest lead time.
- Door material and finish. Thermafoil and laminate hold up well in a busy kitchen and cost less. Painted maple and oak take a refinish later but show wear at the corners. KraftMaid sits in our partner lineup for semi-custom work, and we’ll show you the spec sheets so the comparison is apples to apples.
- Countertop surface. Quartz is non-porous and needs no sealing, which matters in a house with kids. Granite is durable but wants resealing every year or two. Laminate is the budget option and can look sharp with a good edge profile. Butcher block is warm and repairable but needs oiling. Cambria is one of the quartz lines we work with.
- Edge profile and overhang. A standard eased edge keeps cost down. A thicker built-up edge or a waterfall end on an island adds fabrication time and money.
- Sink and faucet. An undermount sink pairs with stone and needs the cutout done right the first time. A farmhouse sink changes the cabinet front and adds labor.
What cabinets and countertops cost in Oakley, CA
The full-kitchen range is $14,000 – $45,000. Here’s how that breaks down by line item, so you can see where your money lands.

| Line item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Small kitchen remodel (cabinets and counters, tight scope) | $9,000 – $20,000 |
| Full kitchen remodel | $14,000 – $45,000 |
Four variables push a job from the low end to the high end. Size: a galley kitchen in a 1990s tract home costs far less than an open-plan layout with a 10-foot island. Existing condition: water damage, an out-of-level floor, or old wiring behind the wall all add labor. Relocation: moving the sink, range, or a load-bearing wall triggers plumbing, electrical, and sometimes structural work. Material grade: stock cabinets and laminate land low; custom cabinetry and premium quartz land high. Permit scope: a like-for-like swap may not need one, but moving plumbing or electrical does.
A written estimate includes demo, cabinet and countertop supply and install, sink and faucet set, and final walkthrough. It typically excludes appliance purchase, flooring repair, drywall patching beyond the cabinet line, and any structural change found mid-job. You get the number up front, no change orders unless you approve them.
See the difference
Before
After
Before
After
Before
AfterWhat Oakley homes specifically do to this job
Oakley’s housing stock is mostly 1990s – 2000s tract homes and newer subdivisions, with older ranch homes and farmhouses near the historic downtown along Main Street. The newer builds usually have square, level kitchen footprints, which keeps the work straightforward. The older ranch homes often have one-piece or early sectional layouts with non-standard cabinet depths, and those need custom sizing or filler work that a stock order won’t solve. Permitting runs through the city of Oakley, and any job touching plumbing, electrical, or structural walls needs a permit and inspection. We pull permits and pass inspections as part of the job.
Where Oakley differs from older East Bay cities: clay soils and former farmland mean post-construction settlement around slab-on-grade foundations is common in the newer subdivisions, and it shows up in a kitchen as an uneven cabinet line or a counter that reads level but isn’t. We check for it on every measure. If you’re working across the broader scope at the same time, this connects to Kitchen Remodeling in Oakley, and homeowners often pair it with Walk-In Showers & Shower Remodeling in Oakley when they’re updating the primary bath in the same push. We cover all of Oakley, from the Hwy 4 corridor subdivisions to the older streets near downtown. For the wider project scope, see our Kitchen Remodeling service, and if the hall bath needs work too, Tub-to-Shower Conversion in Oakley is a natural add.
Serving Oakley, CA – Our Local Coverage Area
We serve Oakley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Cabinets & Countertops in Oakley
Most jobs run 2 – 3 weeks of on-site work, plus cabinet lead time of 3 – 5 weeks for semi-custom. Stock cabinets can compress the front end to under a week of fabrication wait.
A like-for-like swap usually doesn’t require a permit. Moving plumbing, electrical, or a structural wall does, and we pull it and schedule the inspection as part of the job.
Yes, and keeping the sink and range in place is the single biggest cost saver. The footprint stays, the plumbing stays, and the job stays near the low end of the range.
Full-kitchen cabinets and countertops run $14,000 – $45,000 depending on size, material, and whether anything moves. Call (888) 419-3650 for an exact quote; the estimate is free.
Every job is backed by our 730-Day Done Right Promise. If it’s not done right, we make it right, for two years after the final walkthrough.
Get a free estimate on cabinets and countertops in Oakley
Call (888) 419-3650 and a live person answers, any hour, any day. We’ll set a free on-site visit, measure your kitchen, check the floor for settlement, and hand you a written line-item estimate with the number you’ll actually pay. No voicemail, no runaround. Financing at 0% for 18 months and $1,000 off projects over $10,000 are available.
Written by the team at Groundwork Construction Co.