Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Oakley, CA: What It Costs and How Long It Takes
A tub-to-shower conversion in Oakley typically runs $3,500 to $10,000 and takes 5 to 10 working days from demo to final inspection, depending on whether we relocate the drain and how far the tile work extends. We pull the permit, replace the valve and waterproofing to current code, and hand you a written line-item quote before anything gets torn out. Call (888) 419-3650 to schedule a free on-site estimate.

How a Tub-to-Shower Conversion Actually Runs, Stage by Stage
Most homeowners picture a crew ripping out a tub and dropping in a pan. The real sequence is more deliberate, and knowing it up front is how you avoid the surprises that show up three days in. Here’s the order we work in, and where your decisions land.
Stage 1: Measure, open the wall, and confirm the drain
Day one is demolition and discovery. We remove the tub, surround, and any drywall behind it, then expose the drain and supply lines to confirm what’s actually there. This is where we find out whether the existing drain sits centered for a shower pan or needs to shift. You decide nothing yet, but this is the moment the estimate either holds or we flag a change before proceeding.
Stage 2: Rough-in plumbing and framing
Once the wall is open, we set the new shower valve, adjust the drain location if needed, and reframe the opening. Adding a niche or a bench means framing it now. Homeowners typically choose their valve finish and showerhead here, because the rough-in sets what fits. This stage runs about a day to a day and a half.
Stage 3: Waterproofing and inspection
The single most important step, and the one cheap jobs skip. We install a bonded waterproofing membrane over the substrate and build a sloped, waterproof pan, then the city inspector signs off on the rough plumbing before anything gets covered. Skip the inspection and you own the risk. This adds a day, sometimes two if scheduling tightens.
Stage 4: Tile, pan, and finish
Tile and setting material go in, followed by grout and sealant. A standard 3-by-5 shower takes two to three days; larger formats or intricate patterns run longer. You’ll have chosen tile, grout, and any accent by this point. Some Oakley homeowners pair a bath refresh with exterior work like Tile Roofing in Oakley at the same time to consolidate scheduling.
Stage 5: Glass, trim, and final walkthrough
Glass goes in last, after the tile and grout cure, along with the trim, fixtures, and caulk. We walk the job with you, check the pan drains properly, and hand over the warranty in writing. If anything’s off, the 730-Day Done Right Promise means we come back and make it right. That’s the whole job, start to finish, in roughly a week and a half of working days.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make, and What Each One Costs You Later
Every tub-to-shower conversion comes down to a handful of decisions, and each one trades money now against maintenance later. Here’s how they break down for an Oakley bathroom.
- Prefab pan vs. tiled mud-set pan. A prefab acrylic or fiberglass pan installs fast and won’t leak if set right, but feels lighter underfoot. A tiled pan looks built-in and holds up for decades, at a higher install cost and a longer waterproofing stage. We lean tiled when the shower is large and prefab when the budget is tight.
- Tile material. Porcelain is the workhorse: dense, water-resistant, and forgiving in a wet room. Natural stone like travertine looks richer but needs sealing. Large-format tile reduces grout lines; small mosaics on the floor give grip and hide slip risk.
- Shower valve and fixture grade. A mid-grade thermostatic valve from a brand like Kohler holds temperature and lasts. The cheapest builder-grade valve is where most callbacks start.
- Configuration. A curbless, zero-threshold entry adds cost but matters for aging-in-place. A standard curbed pan is the budget path.
- Glass and enclosure. Frameless costs more, frameless with a coating resists hard-water spotting longer. Oakley’s water runs mineral-heavy enough that we recommend a protective coating either way.
What a Tub-to-Shower Conversion Costs in Oakley, CA
For Oakley, tub-to-shower conversion runs $3,500 to $10,000. The low end is a prefab pan, standard valve, and basic tile in an existing footprint; the high end is a tiled mud-set pan, frameless glass, custom tile, and a relocated drain. Five variables push the number from one end to the other:

- Drain relocation. Keeping the drain where it is saves real money; moving it means cutting slab or subfloor.
- Existing condition. Water damage or a failing valve found during demo adds repair cost.
- Material grade. Porcelain and prefab keep the number down; stone and custom tile push it up.
- Glass and configuration. Frameless glass and curbless entries are the biggest add-ons.
- Permit scope. A straight fixture swap costs less to permit than moving plumbing or structure.
Every written estimate we issue is line-itemed and fixed: no-hassle upfront pricing, so the number you see is the number you pay. If you’re folding this into a wider project, much of it overlaps our bathroom remodeling service, and we’ll scope it as part of a full Bathroom Remodeling in Oakley when the rest of the room is on the table.
See the difference
Before
After
Before
After
Before
AfterWhat Oakley Homes Specifically Do to This Job
Oakley’s housing stock changes the job in ways you won’t see in an older Bay Area city. Most of what we work on sits in the 1990s-2000s tract homes and newer subdivisions, with older ranch homes and farmhouses closer to historic downtown along Main Street. Those 1990s-2000s builds often have builder-grade valves and fiberglass surrounds that are now past their service life, which is a large share of why conversions come up here. On the newer slab-on-grade homes along the Hwy 4 corridor, we regularly see settlement and grading issues tied to the shrink-swell clay and former Delta farmland the homes were built on, so we check the floor and subfloor before we set a pan. Hot, dry summers and wet Delta winters mean we schedule tile and waterproofing around the dry season where we can. We cover all of Oakley, and the 94561 ZIP is our most common service address.
Serving Oakley, CA – Our Local Coverage Area
We serve Oakley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Tub-to-Shower Conversion in Oakley
Most Oakley conversions take 5 to 10 working days once demo starts, plus inspection scheduling. A prefab pan with basic tile lands closer to 5 days; a tiled mud-set pan with custom tile and frameless glass runs toward the upper end. Call (888) 419-3650 and we’ll give you a realistic timeline for your specific bathroom.
Yes, in nearly every case. Moving plumbing, swapping the valve, and changing the drain configuration all trigger a plumbing permit and inspection, and that inspection is what protects your waterproofing. We pull the permit and schedule the inspection as part of the job. Call (888) 419-3650 to talk through your scope.
Often, yes. If your existing drain lines up with the new shower pan and the valve stays in place, the conversion stays in the existing footprint, which is the lower-cost path. Wall thickness and framing decide whether it works, and we confirm that during the first stage. Call for a free on-site estimate to find out.
Plan on $3,500 to $10,000, with the spread driven by drain location, material grade, glass, and whether water damage turns up during demo. Every quote is line-itemed and fixed, so the price doesn’t drift once work starts. Call (888) 419-3650 for an exact quote; estimates are free.
Our workmanship is covered by the 730-Day Done Right Promise, one of the longest guarantees in residential construction. If something’s not right, we come back and fix it. Materials carry their manufacturers’ warranties, and we hand everything over in writing at the final walkthrough.
Get a Free Tub-to-Shower Conversion Estimate in Oakley
Call (888) 419-3650 to set up a free on-site estimate for your tub-to-shower conversion in Oakley. A live person answers around the clock, so you won’t wait until Monday. On the visit we measure, check the drain and valve, and walk you through options with a written line-item quote before anything’s decided. No pressure, no hidden numbers.
Written by the team at Groundwork Construction Co.