Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Oakley: What the Job Actually Involves
Custom and geometric windows in Oakley typically run $8,000 – $25,000 for a whole-house package, or $1,200 – $4,500 for a single statement unit like an arched transom, a trapezoid gable window, or a radius bay. The job takes three to six weeks from template to final trim, because nothing is stock: every unit is measured to the rough opening, shop-built, then installed in a sequenced day. Call (888) 419-3650 to schedule a free on-site estimate for Custom & Geometric Windows in Oakley.

How We Build and Install a Geometric Window, Stage by Stage
Custom shapes fail or succeed on the front end. Most of the work happens before a single window arrives, which is why the schedule reads the way it does.
Stage 1: Site measure and template (day 1, 2 – 3 hours)
We measure the rough opening and, for arched and angled units, build a physical template of the shape so the manufacturer cuts to the actual wall, not a drawing. You decide the shape (half-round, eyebrow, true arch, trapezoid, octagon, or a full radius wall) and the glazing package. Bring your HOA design guidelines to this visit. Decisions made here can’t be undone cheaply later.
Stage 2: Structural check and permit (week 1)
Geometric units carry more load than rectangles and often need a header sized for the wider span or a king stud where a mullion lands. We open the wall enough to confirm framing, then pull the permit through the City of Oakley building department. You approve the shape, the trim profile, and the exterior color before the order is released.
Stage 3: Shop fabrication (weeks 2 – 5)
Custom units are built to order. Lead time on a radius or angled window commonly runs three to five weeks; Andersen and Marvin both build to spec and both take that long for true shapes. This is the quiet stretch. We use it to finalize flashing details, order the matching trim, and schedule the install window.
Stage 4: Demo, dry-in, and set (1 – 2 days)
We remove the old unit, inspect the sheathing, repair any rot, and set the new window in a full bed of sealant with proper sill pan flashing. Glass goes in, the unit is shimmed and plumbed, and the exterior is flashed and sealed before we leave for the day. No open wall overnight.
Stage 5: Trim, finish, and inspection (1 – 2 days)
Interior trim, exterior casing, and paint touch-up finish the job. The city inspector signs off, and we walk the operation of every unit with you. You get the written workmanship warranty and the manufacturer’s product paperwork in one folder.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
The shape is the exciting part. These choices decide whether the window performs for twenty years or needs a callback:
- Frame material. Vinyl is the budget-friendly choice and holds up fine in Oakley’s dry summers; it can’t be painted. Wood-clad aluminum (Marvin and Andersen both build this) gives you a real wood interior, a durable painted exterior, and a much longer lifespan at roughly 30 – 50% more per unit. Fiberglass sits between them and handles heat movement better than vinyl on large spans.
- Glazing. Dual-pane with a low-E coating is the standard here and worth the small upcharge given summer sun on south and west walls. Argon fill adds a bit more insulation. Tempered glass is required for any unit within 18 inches of the floor.
- Grid and divided lites. Simulated divided lites between the glass look authentic and don’t trap dirt; true divided lites cost more and need more maintenance. On a geometric unit, the grid pattern has to align with the shape or it reads wrong from the street.
- Trim and casing. Interior poplar or oak, exterior composite or PVC. On a curved unit, the trim is bent or milled to the radius, and that’s a real line item.
- Hardware and operation. Fixed, casement, or awning. A radius unit is often fixed because the crank mechanism alone can add hundreds per unit.
What Custom & Geometric Windows Cost in Oakley, CA
A single geometric or custom unit installed lands between $1,200 and $4,500. A whole-house package with a mix of standard and shaped windows sits in the $8,000 – $25,000 range. Here’s what moves you from the bottom to the top of that band:

- Shape complexity. A half-round over a front door is straightforward. A trapezoid gable window or a full radius wall requires custom fabrication and usually a premium of 40 – 60% over a same-size rectangle.
- Size and span. Bigger opening, bigger header, more glass, higher cost. Anything over 5 feet wide gets expensive fast.
- Frame and glazing grade. Wood-clad aluminum and fiberglass run higher than vinyl. Triple pane is rarely worth it in Oakley’s climate.
- Existing wall condition. Rot, cracked stucco, or missing flashing turns a swap into a repair. On 1990s tract homes we often find under-flashed originals that need correcting.
- Trim and finish. Bent trim on a curved unit, matching paint color, and interior touch-up all add labor.
A written estimate from us lists each unit by size and type, the trim allowance, the permit line, and labor, so you see exactly where the number comes from. What isn’t included: drywall repair beyond the immediate opening, exterior painting beyond touch-up, and any structural work if the framing reveals a surprise. We price those as a separate written change before anyone touches them.
See the difference
Before
After
Before
After
Before
AfterWhat Oakley Homes Specifically Do to This Job
Most of the homes we work on for geometric windows in Oakley sit in the subdivisions that went up along the Hwy 4 corridor in the 1990s and 2000s, plus the newer infill and the older ranch houses near downtown along Main Street. The tract homes matter because builder-grade windows in that era were often thin, under-flashed, and installed to the minimum. When we pull one out to set a custom unit, we frequently find the original sill pan missing or the stucco weep screed sitting too low, which means water has been quietly working behind the wall.
The bigger local wrinkle is soil. Oakley’s newer subdivisions sit on expansive clay and former Delta farmland, and post-construction settlement around slab-on-grade foundations is common here in a way it isn’t in the older, built-out East Bay cities. A settled slab means the rough opening is no longer square, even if the wall looks fine. We check for that before ordering: a custom geometric unit is cut to a drawing, so a skewed opening has to be corrected first or the window won’t seat right. The hot, dry summers and Delta breezes also mean we schedule exterior sealing and paint in the dry season so the flashing cures properly.
Serving Oakley, CA – Our Local Coverage Area
We serve Oakley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Oakley
Plan on three to six weeks total, with the bulk of it being manufacturer lead time on the shaped unit. The install itself is one to two days plus a day for trim. Call (888) 419-3650 for a schedule specific to your window.
Yes. Any change to the size or shape of a window opening, and any new opening cut into a wall, requires a permit through the City of Oakley building department. A straight replacement in the same opening usually does not. We pull the permit and handle the inspection for you.
Sometimes, if the new shape fits inside the existing header span and the framing is sound. A wider or taller custom unit almost always needs a new header. We confirm the framing during Stage 1, before the order is placed, so there are no surprises mid-install.
A single unit runs $1,200 – $4,500 installed, and a full custom package lands between $8,000 and $25,000. Shape complexity, size, and frame material are the biggest price drivers. Call us for an exact quote; estimates are free.
Every project is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. The manufacturer’s product warranty on the window itself stacks on top of that. Call (888) 419-3650 with questions before or after the install.
Get a Free Estimate on Custom & Geometric Windows in Oakley
Call (888) 419-3650 for a free on-site estimate on custom and geometric windows in Oakley. A live person answers, day or night. We’ll measure the opening, talk through shape and frame options, check your HOA guidelines, and hand you a written line-item quote with the permit included. No change orders later. Estimates are free, and the number you see is the number you pay. This dovetails naturally with our Windows & Doors work, and if the project is part of a full Windows & Doors in Oakley scope, we’ll fold it into one plan. We cover Oakley and the surrounding East Contra Costa area. Homeowners often pair this with Concrete Driveways & Concrete Work in Oakley or Asphalt Driveways & Resurfacing in Oakley while the exterior is already torn up.
Written by the team at Groundwork Construction Co.