Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Pittsburg, CA: What It Costs and What’s Involved
A chain link fence in Pittsburg typically runs $3,500 to $9,000 installed, and most residential yards are done in two to four days. You’re getting galvanized or vinyl-coated steel mesh stretched between posts set in concrete, with a top rail, terminal posts, and at least one gate. The number moves with length, height, soil, and whether a permit is required. Call (888) 419-3650 for a free on-site estimate.

How a Chain Link Fence Goes In, Day by Day
Nobody’s fence goes up in an afternoon. Here’s the real sequence, so you know what to expect in the yard and when you have to weigh in on a decision.
Day 1: layout and utility marking. We walk the property line with you, confirm the corners and gate positions, and call 811 for underground utility marking in zip code 94565. That mark-out takes a couple of business days to clear, so we schedule around it. You decide the setbacks now, not later.
Day 2: demolition and prep. Out comes the old fencing, if there is any, and we clear the line of roots, rock, and the odd piece of abandoned concrete. On a typical backyard this is a half day to a full day. New fence needs a clean, straight run to look right.
Day 3: post setting. We auger holes to depth, set terminal posts in concrete, and level everything off a stringline. This is the part that decides whether the fence stays plumb for twenty years or starts leaning in five. Concrete needs to cure before tensioning. You don’t have to be home for this.
Day 4: framing, mesh, and gates. Top rail goes on, mesh gets stretched and tensioned, and the gate gets hung and adjusted for swing and latch. Then we walk the whole run with you and check that every span is tight.
Final: cleanup and a written walkthrough. We haul out old material and confirm the work against your estimate before we leave. If something isn’t right, it’s covered by the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
- Galvanized vs. vinyl-coated mesh. Bare galvanized steel is the cheaper, workhorse option and holds up fine in dry weather. Vinyl-coated (usually green or black) costs more per linear foot but resists rust longer and disappears against landscaping. On the Delta side of town, the coated product is usually worth the upgrade.
- Height. Standard residential is 4 feet. Five feet keeps a medium dog in and gives more privacy; 6 feet is the practical ceiling for most residential lots before wind loading and neighbor sightlines become a real conversation.
- Gauge of wire. Mesh comes in lighter and heavier gauges. Heavier holds its shape longer and resists sagging between posts. If you’re fencing a busy yard or a dog that leans on the fence, go heavier.
- Gate type and width. A walk gate is usually 3 to 4 feet. A drive gate runs 10 to 12 feet and needs heavier terminal posts and a brace to keep the frame from sagging. Decide gate locations before the layout is set; moving one later means tearing out posts.
- Post setting and bracing. Concrete-set posts cost more than driven posts but last longer in our clay-heavy soil. We brace every gate and corner, which some low bids don’t include. That’s where cheap fence jobs fail first.
What a Chain Link Fence Costs in Pittsburg, CA
Most residential chain link fence jobs in Pittsburg land between $3,500 and $9,000. That range covers the fence, posts, top rail, one gate, and cleanup. The five things that push a job to one end of it or the other:

- Total linear feet. A 100-foot run and a 250-foot run are different jobs. Length is the biggest single driver.
- Height and gauge. Going from 4-foot standard to 6-foot heavier gauge adds material and post weight.
- Gate count and width. Every drive gate adds bracing, heavier hardware, and labor.
- Site condition. Rocky ground, old concrete footings in the way, or a hillside slope with retaining needs all add time.
- Permit scope. Height and location determine whether a permit and inspection are part of the job, and that’s a line item.
Your written estimate lists the footage, post spacing, gate count, and whether permit fees are included. It doesn’t include landscaping repair or hauling away an old fence unless we’ve agreed to it up front. Call (888) 419-3650 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Pittsburg Homes Specifically Do to This Job
Wind is the factor homeowners here don’t see coming. Pittsburg sits where the Delta breeze funnels through the Carquinez Strait gap, and a chain link fence is basically a sail. That’s why we over-set terminal posts and brace every gate rather than trusting a standard layout on an exposed lot. On the hillside subdivisions cut into expansive Delta clay, sloped lines mean posts have to be stepped and checked level post by post, and a run that would sit flat on a tract lot will collect water against the bottom of the fence here. Older riverfront and downtown properties near the old mill often come with sagging original fencing and rotted wood posts to haul out first. Walk any of the hillside streets and you’ll see fence lines fighting grade the flatland tracts don’t have. Our technicians have up to 12 years of experience reading exactly this kind of ground.
Serving Pittsburg, CA – Our Local Coverage Area
We serve Pittsburg and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Pittsburg
Most residential chain link fence jobs take two to four days on site. Add two to three business days for the 811 utility mark-out before we start, and longer if a permit is required. Call (888) 419-3650 and we’ll give you a firmer timeline on your yard.
Often yes, depending on height and where the fence sits on the property line. We check the current city requirements for your address before work starts and tell you what’s required in the estimate. Call (888) 419-3650 and we’ll walk through your specific situation.
Usually, yes. We locate irrigation lines during layout and route posts around them. Existing trees and mature shrubs sometimes can’t be saved if they sit directly on the line, and we’ll tell you before we dig. Call (888) 419-3650 to set up the site walk.
Most jobs run $3,500 to $9,000, driven mainly by footage, height, and gate count. A short 4-foot run with one gate lands near the low end; a long 6-foot run with multiple gates and hillside bracing moves toward the top. Call (888) 419-3650 for an exact quote on your yard.
All our fence work is covered by the 730-Day Done Right Promise. If the installation isn’t right, we make it right, and that’s in writing. Call (888) 419-3650 with any questions about coverage.
Get a Free Chain Link Fence Estimate in Pittsburg
We’ll come out, measure the run, check the ground and the gate spots, and hand you a written line-item estimate with no surprises. No pressure, no vague numbers. We also handle the wider project if you’re planning a full Fence Installation in Pittsburg, and homeowners often pair this with Concrete Driveways & Concrete Work in Pittsburg or Asphalt Driveways & Resurfacing in Pittsburg while we’re already on site. Learn more about our Fence Installation service and the areas we cover around Pittsburg. Call (888) 419-3650 to schedule your free estimate.
Written by the team at Groundwork Construction Co.