Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Concord, CA: What It Costs and How Long It Takes
A chain link fence in Concord typically runs $3,500 – $9,000 for a standard residential lot, and most jobs are finished in one to three days once materials are on site. The price covers posts set in concrete, top rail, tension wire, fabric, and gate hardware; the variables are linear footage, height, gauge, and how much old fencing has to come out first. Call (888) 419-3650 for a free on-site estimate before you commit to a number.

How We Build a Chain Link Fence Here, Stage by Stage
Chain link isn’t complicated, but the sequence matters more than most homeowners expect. A fence that leans in two years almost always traces back to a skipped step in the ground work, not the fabric. Here’s what the job actually looks like from our side.
Stage 1: Walk the line and call for utility marking
Day one starts with a string line and a conversation. We mark the exact fence route with you, confirm gate placement and swing direction, and call 811 for underground utility locating. That last step is free but not instant, so we schedule it first and don’t put a shovel in the ground until the markings are back. On most Concord lots this adds two to three business days before digging begins.
Stage 2: Demo and terminal posts
If there’s an existing fence, we pull it and haul it off. Then come the terminal posts: the corners, the ends, and both sides of every gate. These carry the tension of the entire run, so they get set deeper and in more concrete than the line posts. We set them first and let them cure overnight. This is the stage where you’ll want to have already locked in gate width, because a 4-foot walk gate and a 12-foot double drive gate need very different post spacing.
Stage 3: Line posts and concrete
Next we set the line posts every 8 to 10 feet, depending on height and wind exposure, then pour concrete around each one. A standard residential run calls for roughly one 80-pound bag per post. On the older Concord tracts we sometimes hit buried debris or an old footing from a previous fence, and that’s a same-day conversation, not a surprise line on the invoice at the end.
Stage 4: Top rail, tension wire, and fabric
After the concrete sets, usually the next morning, we run the top rail, install the tension wire along the bottom, and stretch the fabric. Stretching is where a cheap job and a good job part ways; fabric that isn’t pulled tight will sag within a season. Gates get framed, hung, and adjusted for a clean latch before we leave.
Stage 5: Final walkthrough
We walk the whole line with you, open and close every gate, and point out anything worth watching. Any concrete cleanup gets handled before we pull out. That finish is backed in writing under our 730-Day Done Right Promise: if a post shifts or a gate sags inside that window, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Change Your Fence
Most of the decisions happen before we dig, and they’re the ones that shape both the price and how the fence ages. Here’s what we walk through with homeowners.
- Height: 4-foot is common for marking a property line, 5-foot is the sweet spot for containing a dog, and 6-foot is the practical privacy height. Taller fences catch more wind, so post depth and concrete volume go up with height.
- Wire gauge: 11.5-gauge is the standard residential choice and holds up well. 9-gauge is noticeably heavier and costs more, but it’s worth it on a fence line that takes abuse from kids, dogs, or balls.
- Mesh size: 2-inch mesh is the standard. 1⅜-inch or smaller keeps small dogs and rabbits in, and vinyl-coated fabric is available in green or black if you’d like the fence to read less like a chain link.
- Coating: Galvanized is the baseline and the most economical. Vinyl-coated costs more upfront but holds color and blends better against landscaping.
- Gates: Walk gates, double drive gates, and self-closing hardware for pool compliance all price differently, and every gate adds a pair of terminal posts to the job.
A chain link fence is part of a full property-line plan, and if you’re reworking the boundary anyway, a look at our Fence Installation in Concord page will show you the wider scope before you decide on materials.
What a Chain Link Fence Costs in Concord, CA
Plan on $3,500 – $9,000 for a typical Concord residential chain link fence, installed. That covers the range from a short 4-foot property-line run to a taller, heavier-gauge fence with a gate or two.
Five things push a job toward the low or high end:

- Linear footage: the biggest lever. A 100-foot line and a 300-foot perimeter are different jobs entirely.
- Height and gauge: going from 4-foot 11.5-gauge to 6-foot 9-gauge moves the material cost meaningfully.
- Old fence removal: hauling off an existing fence, especially one set in old concrete footings, adds labor.
- Terrain and access: a sloped line or a backyard a truck can’t reach adds handling time.
- Gates and hardware: each gate carries terminal posts and hardware that a straight run doesn’t.
Your written estimate breaks out material, labor, removal, and gates line by line, so the number you see is the number you pay. Our Fence Installation service covers the same estimating standard on every job.
See the difference
Before
After
Before
After
Before
AfterWhat Concord’s Housing Stock and Climate Do to This Job
Concord sits where the cool, fog-influenced Diablo Valley floor meets the hot inland slopes of Mount Diablo, and that gradient shows up in fence work. On the west side, marine-layer moisture rusts untreated steel faster and softens the ground along the bottom rail. Uphill in the foothills toward Mount Diablo, summer heat and wind exposure dry out and stress the fabric and put more load on the posts. Same subdivision, two different failure patterns, so we size posts and concrete to the site rather than to a blanket rule.
The bigger factor is the housing. Concord is dominated by post-WWII and 1950s – 70s single-story ranch tract homes, with denser mid-century apartments and condos near downtown and the BART corridors and newer infill and hillside homes toward the foothills. In the older tracts, we regularly find original property-line fences sunk in footings nobody documented, and the occasional 1950s – 60s addition built without permits that complicates where the line actually runs. Before any digging, it’s worth confirming the boundary against your plat and checking with the city on whether your line triggers a permit, particularly on corner lots. We cover jobs across Concord, from the tracts near the valley floor to the hillside homes.
If the driveway runs along that same fence line, homeowners often pair this with Concrete Driveways & Concrete Work in Concord or Asphalt Driveways & Resurfacing in Concord and handle both in one visit rather than two.
Serving Concord, CA – Our Local Coverage Area
We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Concord
Most residential chain link fences in Concord take one to three working days once materials are on site, with the concrete needing overnight curing before the fabric goes on. Add a few business days at the front for the 811 utility locate. Call (888) 419-3650 for a timeline tied to your yard.
It depends on height and location, so the answer is specific to your lot. Shorter property-line fences often don’t require a permit, while taller fences or those on a corner or in a front setback may. We confirm the requirement with the city before we dig and factor any permit into the written estimate. Call (888) 419-3650 and we’ll walk you through what applies to your property.
Yes, in most cases. We call 811 and work around utility markings, and we route the line to avoid irrigation and established planting where the layout allows. If a run has to cross a buried line, we’ll flag it before digging rather than after. Call (888) 419-3650 to set a walkthrough.
Expect $3,500 – $9,000 installed, with most of the swing coming from linear footage, height, gauge, and how many gates you need. Old fence removal and sloped terrain push it toward the high end. Call (888) 419-3650 for an exact quote, and estimates are free.
Every chain link fence we install is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If a post shifts or a gate sags inside that window, we come back and fix it. Call (888) 419-3650 to get started.
Get a Free Chain Link Fence Estimate in Concord
If you’re pricing a chain link fence in Concord, start with a free on-site estimate. We walk the line with you, confirm height, gauge, and gate placement, and hand you a written line-item quote covering material, labor, and removal. Calls are answered by a live person, 24/7, so you’re never stuck in a voicemail queue. Call (888) 419-3650 to schedule yours.
Written by the team at Groundwork Construction Co.