Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Clayton, CA: What the Job Really Involves
Cabinets & countertops in Clayton, CA typically run $14,000 – $45,000 for a full kitchen’s worth of cabinetry and stone, and most jobs take three to five weeks from demo to final countertop install. The work is sequenced, not simultaneous: cabinets set first, template after, then countertops cut and dropped in. Call (888) 419-3650 for a free on-site estimate with a written, line-item quote before anything gets ordered.

How We Run a Cabinet and Countertop Job in Clayton, Stage by Stage
What separates a clean job from a mess is sequencing and lead times. Here’s the actual path, roughly five stages across three to five weeks.
Stage 1: Measure and lock the plan (week 0)
We measure the walls, check for out-of-square corners, and confirm appliance sizes and clearances. This is where you decide layout, door style, finish color, and countertop material. Allow two to three weeks of lead time for semi-custom cabinets and one to two weeks for stone fabrication after template. Those waits drive the whole calendar.
Stage 2: Demo and rough prep (days 1 – 3)
Old cabinets and countertops come out on day one. Days two and three are for what’s behind them: patching drywall, correcting framing, and addressing any plumbing or electrical rough-in. If you’re relocating a sink or adding an outlet, the rough work happens now and an inspection gets scheduled before anything closes up. Existing clay soil settlement in older Clayton homes sometimes shows up here as unlevel floors.
Stage 3: Cabinet install (days 3 – 6)
Base and wall cabinets set, shimmed level, and fastened to studs. Crown and light rail go on. This is the stage where door alignment and drawer function get dialed in. You’ll walk it and sign off on hardware placement before countertops move forward.
Stage 4: Template and stone install (days 7 – 14)
A fabricator templates the tops once cabinets are final and permanent. From template to install is usually five to ten business days for quartz or granite. Sink and faucet cutouts are done at the shop. On install day, countertops set, seams are joined, and the sink gets undermounted and plumbed.
Stage 5: Backsplash, trim, and punch (days 14 – 21)
The last stretch closes gaps, sets the backsplash, reinstalls the dishwasher and disposal, and finishes the punch list. This is a single-visit closeout in most cases. You get a final walkthrough, and everything is covered by the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Cabinets and Countertops
Most of the budget swings happen in these five decisions. Each carries a real trade-off.
- Cabinet construction (stock vs. semi-custom): Stock sizes are faster and cheaper but leave filler gaps. Semi-custom fits the run tighter and allows non-standard depths. KraftMaid sits in the semi-custom tier and is a strong fit for a room with a dedicated sink cabinet and pantry.
- Door material and finish: Painted MDF looks clean and crisp but shows chips. Solid wood (maple, oak, alder) takes stain and lasts, at a higher material cost.
- Countertop material: Quartz (Cambria) is non-porous and low-maintenance. Granite is durable and heat-tolerant but needs sealing. Butcher block warms the room and costs less, but requires oiling and shows wear.
- Edge profile and thickness: Standard 3cm eased edge is the practical default. A built-up 6cm edge or a mitered waterfall reads as high-end and adds fabrication labor.
- Sink and hardware: Under-mount undermount sinks are the standard now; farmhouse apron fronts need a custom cabinet face. Soft-close hinges and full-extension drawer slides are worth the small step up.
What Cabinets & Countertops Costs in Clayton, CA
The full-job range for Clayton runs $14,000 – $45,000, split between cabinetry, stone, and labor. Here’s how the line items typically break out:

| Line Item | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Backsplash Installation | $800 – $2,500 |
| Full Scope (Cabinets + Countertops) | $14,000 – $45,000 |
What pushes a job to the low end: standard stock sizes, a modest kitchen footprint, quartz in a common color, and no plumbing or electrical moves. What pushes it high: a large footprint, semi-custom or custom doors, an island with its own stone, and relocating the sink or range.
A written estimate in Clayton includes measured cabinet quantities, stone material and fabrication, install labor, and permits where required. It typically excludes appliance costs, lighting, and painting unless you ask for them in scope. You get upfront pricing with no surprises. On projects over $10,000, we knock $1,000 off and offer 0% financing for 18 months.
See the difference
Before
After
Before
After
Before
AfterWhat Clayton Homes Do to This Job
Clayton’s housing stock is split: mid-century ranch homes in the flat core and 1980s – 2000s custom homes on the steep lots that climb toward Mount Diablo. That matters here because wall dimensions vary, and existing cabinet runs are rarely square. On the hillside properties, we routinely find unlevel floors from expansive clay soil, which means shimming and adjusting before any base cabinet gets set. Wildfire defensible-space rules affect landscape but also interior material choices where a kitchen shares a wall with a fire-rated assembly. If you’re filing a permit, the process in ZIP 94517 runs through Contra Costa County or the city depending on the scope, and the countertop and cabinet installation itself is often straightforward once the plan is set. Homeowners in Clayton also tend to pair this job with Walk-In Showers & Shower Remodeling in Clayton when they’re renovating the whole level at once, or with Tub-to-Shower Conversion in Clayton when the bathroom is next on the list. If the scope grows, it’s part of a full Kitchen Remodeling in Clayton.
Serving Clayton, CA – Our Local Coverage Area
We serve Clayton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Clayton
Plan on three to five weeks from demo to final walkthrough, with the longest wait being cabinet and stone lead times. Cabinet install itself takes three to four days, and countertop fabrication takes five to ten business days after template. Call (888) 419-3650 for a timeline tied to your specific order.
Straight cabinet and countertop swaps usually don’t require a permit; relocating plumbing, moving electrical, or changing structural walls does. That’s the deciding line. We identify what triggers a permit at the estimate stage, so nothing surprises you mid-job. Call us to walk through your scope.
Yes. A cabinet and countertop replacement stays on the surfaces and doesn’t touch the floor, walls, or ceiling beyond local patching. The kitchen stays functional for most of the job. When you’re ready to widen the scope, our kitchen remodeling service covers the full room.
The full job runs $14,000 – $45,000, with cabinets at $4,000 – $13,000 and countertops at $2,000 – $6,500 installed. A dedicated island adds $3,000 – $10,000. Call (888) 419-3650 for an exact quote. Estimates are free.
Our 730-Day Done Right Promise covers workmanship for two full years. If something isn’t right, we come back and fix it. Material warranties vary by brand and are documented on your signed estimate. Call for details.
Get a Free Cabinets & Countertops Estimate in Clayton
We serve homeowners throughout Clayton and the surrounding foothill neighborhoods, and we’ll come out, measure the space, and put a written line-item estimate in your hands. On the call, we confirm your address, talk through material direction, and schedule the site visit. Bring your questions about finishes, stone, and timeline. The call is answered by a live person, 24/7, at (888) 419-3650. No voicemail, no wait until Monday. Just a straight answer and a real number.
Written by the team at Groundwork Construction Co.