Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Clayton, CA: What It Costs and What It Takes
Walk-In Showers & Shower Remodeling in Clayton, CA typically runs $4,500 – $12,000 for a dedicated walk-in installation and $9,000 – $28,000 when the shower is part of a larger bathroom remodel, with most builds finished in two to three weeks once materials are on site. The work covers demo of the old surround, waterproofing, drain and valve rough-in, tile or panel finishes, and a glass or curtain enclosure. Call (888) 419-3650 for a free on-site estimate.

How the Shower Build Actually Runs, Stage by Stage
Most contractors quote a walk-in shower as a single line item. That hides the real sequence, which matters because half the decisions are yours and they arrive at specific points. Here’s how it runs on a Clayton job.
Stage 1: Measure, tear-out, and inspection (days 1 – 2)
We protect the floor and hallway, then pull the old surround, pan, and valve trim. If the existing drain is off-center or the subfloor shows soft spots, that gets documented before anything goes back in. If permits are required (see the Clayton section below), the rough plumbing and electrical inspection usually happens at the end of this stage. You decide nothing here except whether you want the old fixtures saved.
Stage 2: Rough-in and framing (days 2 – 3)
This is where the job’s cost is really set. We move the drain to center the shower properly, shift the valve to code height, and add blocking for grab bars and a bench if you want one. If you’re relocating the shower to a different corner of the bathroom, this is the day plumbing lines get re-routed, and that’s a real cost jump. You decide here whether to add a niche, a bench, or a curbless entry.
Stage 3: Waterproofing and backer (days 3 – 4)
We use a bonded sheet or liquid waterproofing membrane over cement board, with the pan sloped to drain before any tile goes down. This stage takes a full day and is invisible when it’s done, which is exactly why it’s the one most often shortcut. You decide nothing here. Approve the membrane inspection if your jurisdiction requires one.
Stage 4: Tile, stone, or panel install (days 5 – 9)
Wall tile, floor tile, niche trim, and grout. Large-format porcelain goes faster than small mosaic but shows lippage on uneven walls, so it needs a flatter substrate. Natural stone needs sealing and reads heavier in a small shower. You decide the grout color and layout before this stage starts, not during.
Stage 5: Glass, fixtures, and final walkthrough (days 10 – 14)
Frameless glass is templated after tile is set, so add roughly 7 – 10 days of lead time from your glass vendor. That’s the single most common reason a shower job “feels” like it took a month instead of two weeks. We install the showerhead, valve trim, drain cover, and any grab bars, then walk the job with you and hand over the written workmanship warranty.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
- Curbless vs. low-curb entry: A true curbless shower needs the floor framed down or the slab recessed, which adds framing cost and a longer rough-in day. It’s the right call for aging-in-place and for anyone planning to stay in the Clayton home long term. A low 2 – 3 inch curb costs less and drains reliably.
- Porcelain tile vs. natural stone: Porcelain holds up to hard water, doesn’t need sealing, and costs less per square foot. Marble and travertine look richer but demand sealing every year or two and show etching from soap and citrus.
- Tiled pan vs. prefab pan: A tiled pan with a proper liner or membrane is fully site-built and matches your floor. A prefab acrylic pan (Kohler and similar brands make solid ones) installs faster, cleans easily, and costs noticeably less, but limits your drain position.
- Frameless glass vs. framed vs. curtain: Frameless glass is the most expensive option and needs precise templating. Framed glass or a quality curtain with a liner costs far less and gives you flexibility on opening size.
- Niche and bench: A recessed niche between studs is inexpensive and worth doing. A built-in bench needs framing and adds labor; a freestanding bench or a fold-down seat is the budget alternative.
What Walk-In Showers & Shower Remodeling Costs in Clayton, CA
Expect $9,000 – $28,000 for a full walk-in shower remodeling project in Clayton, and $4,500 – $12,000 for a dedicated walk-in shower installation as a standalone job. A straight shower replacement without layout changes lands around $3,000 – $8,500. Here’s what moves you up or down that range:

- Size and layout: A 36″ x 48″ shower sits at the low end. A 60″ x 60″ walk-in with a bench and dual showerheads pushes toward the top.
- Plumbing relocation: Moving the drain or valve is a rough-in cost. Moving the shower to a different wall, or converting a tub location to a curbless shower, adds real labor and often a permit.
- Material grade: Porcelain and a prefab pan run lower. Large-format stone and frameless glass run higher.
- Existing condition: Old tile over drywall, hidden rot in the subfloor, or an undersized drain line all get discovered at demo and priced before we continue.
- Permit scope: A cosmetic tile swap may not need a permit. A layout change, valve relocation, or added electrical for lighting almost always does.
Every estimate we write is itemized by stage so you can see what a line-item costs, and our pricing is fixed once you sign. If we find something at demo that changes the scope, you hear about it before we spend another hour, not after. That’s part of the 730-Day Done Right Promise. Call (888) 419-3650 for a free on-site estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Clayton Homes Specifically Do to a Shower Job
Clayton (ZIP 94517) is a small foothill town at the base of Mount Diablo, and the housing stock here changes what happens inside the shower walls. Mid-century ranch homes in the flat core often have original drywall-backed tile, so planning the new build around what’s actually behind the tile is a real variable. Custom homes from the 1980s through the 2000s on steep lots often have raised foundations and tight crawlspace, which is why we measure drain clearance before promising a curbless design. The town’s expansive clay soils swell and shrink seasonally, and we’ve seen that translate into hairline cracks in floor tile and pan movement long after a shower is finished. That’s why we don’t skip the membrane and why we load-rated the subfloor for any bench or heavy stone install. Near the wildland-urban interface where Diablo winds drive fire weather, we also keep the material conversation honest about what holds up. If the shower project ends up part of a whole-bath scope, it’s often worth looking at the wider picture with our Bathroom Remodeling in Clayton service. And when a Clayton homeowner asks about the rest of the house, shower work frequently pairs with Metal Roofing in Clayton and Roof Replacement & Installation in Clayton for the same fire-hardened reasoning.
Serving Clayton, CA – Our Local Coverage Area
We serve Clayton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Clayton
A standard walk-in shower runs 2 – 3 weeks of active construction, plus 7 – 10 days of lead time for frameless glass templating. A full bathroom remodel with a walk-in shower usually runs 4 – 6 weeks. Call (888) 419-3650 to schedule a free estimate and get a firm schedule.
Yes, if you’re moving the drain, relocating the shower valve, changing the shower footprint, or adding electrical. A cosmetic finish swap (tile and fixtures in the same locations) usually doesn’t require one. We pull permits on projects where they’re required, and the inspection is scheduled at the rough-in stage. Call us to schedule and we’ll confirm what your specific job needs.
Absolutely. A same-footprint conversion keeps the existing drain and valve location and stays on the lower end of the Clayton range. That’s the right call for most homeowners who want a clean walk-in without the cost of relocating anything. Call (888) 419-3650 for a free estimate and we’ll tell you honestly whether your layout allows it.
A dedicated walk-in shower installation runs $4,500 – $12,000, and a full walk-in shower remodeling project runs $9,000 – $28,000. The variables that push you toward the top are plumbing relocation, large-format stone, frameless glass, and a curbless design. Call for an exact itemized quote. Estimates are free.
Every shower project is covered by our 730-Day Done Right Promise. If something we installed fails inside that window, we come back and make it right at no charge. The written warranty is handed over at the final walkthrough with your line-item closeout. Call (888) 419-3650 to schedule.
Get a Free Walk-In Shower Estimate in Clayton
Call (888) 419-3650 to schedule a free on-site estimate for Walk-In Showers & Shower Remodeling in Clayton. A live person answers, day or night. We’ll measure the shower, check the drain and subfloor, talk through the material options honestly, and hand you a written itemized estimate with fixed pricing and no change orders. If you’re planning ahead, ask about 0% financing for 18 months and $1,000 off projects over $10,000. Groundwork Construction Co. serves Clayton and surrounding Contra Costa communities, and our Bathroom Remodeling team coordinates the shower scope with the rest of the bath when you need it. You can also see the full Clayton service area page for other projects.
Written by the team at Groundwork Construction Co.