Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Concord, CA: What the Job Actually Involves
New cabinets and countertops in Concord typically run $14,000 – $45,000 for a full kitchen’s worth, and the work takes three to four weeks from demo to final countertop install. Most of that time is spent waiting on fabrication, not building: cabinet boxes and doors arrive in seven to ten business days, and stone counters are templated only after the cabinets are set and level. Call (888) 419-3650 and we’ll walk your kitchen and give you a written, line-item number before anything gets ordered.

How the Work Actually Runs, Week by Week
Here’s what happens on a real cabinets and countertops project in Concord, in order, with the decisions that land on you at each stage.
Stage 1, Days 1 – 2: Demo and rough condition
We pull the old cabinets, disconnect the sink and any gas line to the range, and expose the wall and floor beneath. This is where surprises surface: water damage behind a 1960s sink cabinet, a floor that isn’t level, or a wall that isn’t plumb. You’ll see photos of everything we find before we quote any add. Elected changes get priced in writing at this point, not after the fact.
Stage 2, Days 3 – 5: Rough-in and patching
If you’re relocating a sink, adding a dishwasher circuit, or moving the range to a different wall, this is when the plumber and electrician rough in the lines. You’ll decide your appliance sizes and clearances now, because cabinet layout depends on them. Drywall patches, cabinet blocking, and floor prep follow. Most jobs skip this stage entirely; moving plumbing or gas adds roughly three to five days and real money.
Stage 3, Days 6 – 9: Cabinet install
This is the part that has to be right. We set base cabinets dead level, shim where the floor falls, and scribe the uppers to the wall. Concord’s older ranch homes rarely have square corners, so expect scribe molding rather than exposed gaps. Doors and drawer fronts go on last. You’ll confirm hardware style and placement before we drill a single hole.
Stage 4, Days 10 – 14: Template, then stone
Countertop fabricators template only after cabinets are set and level, which means the sink base and any island have to be final. The template visit takes about an hour; fabrication of quartz or granite runs five to eight business days. You’ll pick your edge profile and sink cutout at template time. This waiting window is why we schedule cabinet and countertop orders so tightly.
Stage 5, Days 15 – 20: Countertop set, sink, and finish
The stone finally lands, gets set, and the sink and faucet go in. We finish electrical at the range and dishwasher, caulk the backsplash line, and walk the job with you. Whole sequence runs three to four weeks for most kitchens. Larger layouts with an island, or anything with relocated plumbing, run four to six.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Be Arguing With Your Spouse About
- Cabinet box construction: Plywood boxes hold up better than particleboard in a kitchen that sees real moisture. Framed cabinets are forgiving on uneven 1950s walls; frameless gives you more usable interior space but demands more precise walls. Plywood construction typically sits at the higher end of the cabinet range.
- Cabinet grade and finish: Painted MDF doors look sharp and cost less but chip at the corners. Solid wood doors cost more and show grain. Thermofoil is the cheapest and the one we get called back on most.
- Countertop material: Quartz is non-porous, uniform, and the practical default. Granite is natural, unforgiving on seams, and needs periodic sealing. Laminate runs far cheaper and, honestly, is fine for a rental or a flip. Butcher block is warm and budget-friendly but needs oiling.
- Countertop thickness and edge: A standard 3cm slab with a simple eased edge is the value pick. A mitered edge (fabricated to look like 6cm) hides the plywood substrate and costs more; it’s worth it on islands.
- Sink type: An undermount sink pairs with stone and needs a fabricator’s cutout; a drop-in works with laminate and gets swapped without touching the counter. Farmhouse sinks add fabrication cost and cabinet modifications.
- Island vs. no island: If your kitchen can take one, this is where the number jumps. Islands also mean an extra countertop run, an extra electrical drop, and often a relocated circuit.
What Cabinets & Countertops Cost in Concord, CA
Plan on $14,000 – $45,000 for cabinets and countertops together in a typical Concord kitchen. That’s the full range; most single-story ranch kitchens settle in the middle of it. Here’s how the line items break out when we write the estimate:

- Cabinet installation: $4,000 – $13,000 (labor and cabinetry, depending on linear footage and construction)
- Countertop installation: $2,000 – $6,500 (fabrication, material, template, install)
- Backsplash: $800 – $2,500 if it’s part of the same scope
- Island installation: $3,000 – $10,000 if you’re adding one
The variables that push a job toward the high end: linear footage (an L-shaped galley vs. a U-shape with an island), existing-condition surprises like water damage or out-of-level floors, relocating a sink or gas line, upgrading from quartz to a natural slab or from stock-grade to custom cabinets, and any added permit scope if you’re moving walls or adding an island with electrical. What’s usually not in a cabinets and countertops estimate: appliances, flooring, painting, and any plumbing or electrical that runs beyond the immediate work zone. Those get quoted separately so you can see them.
See the difference
Before
After
Before
After
Before
AfterWhat Concord Homes Specifically Do to This Job
Concord is dominated by post-WWII and 1950s – 70s single-story ranch tract homes, and that shapes cabinets and countertops work here in ways it doesn’t in newer East Bay stock. The kitchens in these homes were built small, with cabinets screwed to walls that have since settled out of plumb and floors that have sagged with age. We plan for scribing on nearly every install and for leveling under base cabinets before stone ever gets templated; if the cabinets aren’t dead level, the countertop seams won’t close. We also routinely find 1950s – 60s additions and remodel work that was built without permits, and when we open a wall and find unpermitted electrical or a moved gas line, that has to be brought up to code before the new cabinets go in. That’s a real line item, and one you want priced before demo, not during. It’s why our estimates start with a walk-through rather than a phone number. Homes in the 94518 and 94519 ZIPs near the Diablo Valley floor tend to show more moisture-related cabinet damage behind sinks, while homes toward the Mount Diablo foothills bake in summer heat that warps cheaper thermofoil doors over time. If the wider project pulls in flooring or layout changes, that’s part of Kitchen Remodeling in Concord, and we’ll scope it that way.
Serving Concord, CA – Our Local Coverage Area
We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Concord
Three to four weeks is typical, with five to six weeks for larger kitchens or relocated plumbing. The long pole is always countertop fabrication, which waits on cabinet install. Call (888) 419-3650 for a schedule built around your specific kitchen.
Like-for-like replacement generally doesn’t trigger a permit, but moving plumbing, adding electrical for an island, or relocating a gas line does. We pull permits and pass inspections when the scope calls for it, and we’ll tell you upfront which side of that line your project lands on.
Yes, and most of our Concord kitchens go that route. Keeping the sink and range where they are and matching the new cabinet footprint to the old one saves both time and money, and it keeps the job out of permit territory in most cases.
Most complete replacements land between $14,000 and $45,000, with the number driven by cabinet grade, countertop material, linear footage, and whether you’re adding an island. Call (888) 419-3650 for an exact quote; estimates are free and written line by line.
Every cabinets and countertops job is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s the workmanship, backed in writing, and it applies to the install, not just the materials.
Ready to Price It for Real
Call (888) 419-3650 for a free on-site estimate for cabinets and countertops in Concord. We’ll measure your kitchen, talk through cabinet and countertop options with actual numbers attached, and hand you a written estimate that shows every line. No pressure, no vague range. And if the project runs wider than cabinets and counters, you can also pair it with a Walk-In Showers & Shower Remodeling in Concord or a Tub-to-Shower Conversion in Concord while we’re already on site. You can see the full scope of what we do across Concord and our Kitchen Remodeling service.
Written by the team at Groundwork Construction Co.