Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Concord, CA: What It Takes and What It Costs
Door installation in Concord, CA typically runs $450 to $2,400 per door for exterior and interior replacement, with most standard single-door swaps finished in one day and pre-hung exterior entries taking two. The job involves pulling the old slab and frame, checking the rough opening for rot or out-of-square framing, setting and shimming the new unit, then sealing, trimming and hardware. Call (888) 419-3650 for a free on-site measure and a written line-item quote.

How We Run a Door Installation Job, Start to Finish
Every door installation we do in Concord follows the same sequence. Here’s what each stage looks like and what you’ll be deciding.
Stage 1: Measure and site check (day 1, about 45 minutes)
We measure the rough opening, check the wall for plumb and square, and look at what’s behind the trim: original framing, drywall returns, stucco or siding. On Concord ranch homes from the 1950s and 60s, this is where we find out whether the opening is true or whether decades of settling have pushed it out of square. You decide door style, swing direction and material at this visit. We hand you a written quote before anyone touches a tool.
Stage 2: Order and lead time (5 to 15 business days)
Stock sizes in steel or fiberglass arrive fastest. Custom widths, arched tops, glass inserts or anything in wood push lead times longer. This is the stage homeowners underestimate, so we schedule the install date the moment your order is confirmed. You’ll get the exact date in writing.
Stage 3: Demo and prep (install day, 2 to 4 hours)
We pull the old door and frame, cut back damaged drywall or stucco as needed, and inspect the header and jack studs. If there’s rot, we replace it before the new unit goes in. Skipping this step is how a door ends up sticking within a season, so we don’t rush it. This is also when we flash and seal the opening.
Stage 4: Set, shim and seal (install day, 2 to 3 hours)
The new door goes in plumb, level and square, shimmed at the hinge points, screwed through the frame into solid framing. We seal the exterior perimeter with the right flashing and caulk for your wall type, then check the swing about a dozen times before we call it done. Exterior entries get weatherstripping and a threshold set to drain away from the house.
Stage 5: Trim, hardware and final walk (install day, 1 to 2 hours)
We reinstall or replace casing, hang the hardware, adjust the strike plate, and walk you through the operation, the lockset and the finish. If we disturbed any paint or stucco, we tell you what needs to be finished and by whom. Any issue found during the walk gets fixed before we collect final payment, backed by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Be Picking Between
Door installation isn’t a single product. What you pick shapes the cost, the maintenance and how the door holds up. Here are the real options and the honest trade-offs.
- Steel exterior doors – The most common pick for Concord entries. Tough, paintable, energy-efficient with a foam core, and the most affordable at the low end of the range. The catch: a dent or scratch invites rust, so keep up with paint touch-ups.
- Fiberglass exterior doors – Won’t rust or dent, holds up well against Concord’s hot summers, and can be finished to look like wood grain. Costs more than steel but often lasts longer with less fuss.
- Wood exterior doors – The premium look. Beautiful, but they need refinishing every few years in our sun and dry summers, and they’re the priciest option. Suits homeowners who want the craftsmanship and will maintain it.
- Interior hollow-core doors – The budget workhorse. Light, cheap, fine for closets and bedrooms. Won’t block sound and can crack if slammed.
- Interior solid-core doors – Heavier, quieter, better for bedrooms and home offices. Costs roughly double hollow-core per door but the difference in feel is obvious.
- Pre-hung vs. slab – A pre-hung unit includes the frame and is faster to install; a slab reuses the existing frame and saves money if the frame is sound. On older Concord homes, we usually find the frame is the weak point.
- Patio and sliding doors – If the opening is large, you’re looking at sliding glass or French doors. Kitchen and living-room upgrades in Concord often pair this with our Windows & Doors in Concord work so the whole wall matches.
- Hardware – Locksets, deadbolts and handles are a small line item but a big daily touchpoint. We install what you choose and test every mechanism before the walk-through.
What Door Installation Costs in Concord, CA
Expect $450 to $2,400 per door installed, depending on the door type, the opening condition and what hardware you choose. Interior hollow-core replacements land near the bottom of that range; a custom wood entry with glass inserts and premium hardware lands at the top.
These are the variables that move the number:

- Door material and grade – Steel and hollow-core are the least expensive; fiberglass, wood and custom glass push the price up.
- Opening condition – A sound, square opening keeps labor tight. Rot, out-of-square framing or water-damaged drywall adds repair hours.
- Size – Standard widths and stock heights are cheaper. Oversized, arched or non-standard openings require custom orders.
- Hardware and finish – Basic locksets versus premium hardware, and whether the door ships prefinished or needs paint or stain on site.
- Permit scope – Straight like-for-like swaps usually don’t need a permit. Widening an opening, changing the header or converting a wall to a door does, and that adds plan check and inspection time.
A written estimate from us lists the door itself, labor, hardware, trim, disposal and any repair allowance as separate lines. Painting, stucco patching or siding repairs are typically not included unless we call them out, so you see exactly what’s covered before you sign.
See the difference
Before
After
Before
After
Before
AfterWhat Concord Homes Specifically Do to This Job
The housing stock here drives the work. Concord is dominated by post-WWII and 1950s-70s single-story ranch tract homes, plus denser mid-century apartments and condos near downtown and the BART corridors. In the older tracts, we regularly find original 1950s and 60s additions built without permits, shallow-pitch construction and settled slab foundations – which means the rough opening for your new door is rarely as square as the one on the showroom floor. We plan for that correction on every older Concord door installation.
The local climate shapes the choice too. Concord is warm and inland, with hot dry summers and mild wet winters, and the hills create localized wind and drainage patterns. On the Mount Diablo foothill side, entry doors take more sun exposure and need UV-stable finishes; on the valley floor toward the Diablo Valley side, marine-layer moisture makes flashing and sealing the priority. That’s why the same subdivision can demand two different door specs within a mile.
We install doors across Concord ZIP codes 94527, 94519, 94522 and 94524, from the ranch tracts near downtown out toward the hillside homes. Homeowners often pair a new entry with Chain Link Fence in Concord work for security or with a Vinyl Fence in Concord for backyard privacy, and our Windows & Doors service covers the windows in the same rooms. If the project expands to a full exterior refresh, see our service-area page for Concord to map it out.
Serving Concord, CA – Our Local Coverage Area
We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Concord
A standard interior door replacement takes about two to four hours, and an exterior entry door typically takes one full day including demo, sealing and trim. Custom doors or openings needing framing repair can push to two days. We confirm the schedule in writing when you order.
Replacing a door in the same opening at the same size usually doesn’t require a permit. Widening an opening, changing the structural header, or turning a wall into a doorway does, and the city’s plan check and inspection process adds time. We’ll tell you plainly on the estimate whether your job needs one and handle the paperwork.
Yes. A like-for-like swap in an existing opening leaves plumbing and wiring alone. Only when you relocate the doorway, enlarge it, or change the wall does electrical or plumbing come into play, and we’ll flag that before work starts.
Most door installations here run $450 to $2,400 per door, with the door material, opening condition and hardware driving the number. Call (888) 419-3650 for a free on-site measure and an exact line-item quote – estimates are free.
Every door installation we do is covered by our 730-Day Done Right Promise. If something isn’t right, we come back and make it right, and our technicians bring up to 12 years of experience to the job. Call (888) 419-3650 to schedule your free estimate.
Get a Free Door Installation Estimate in Concord
Call (888) 419-3650 to schedule a free on-site estimate for door installation in Concord. We’ll measure the opening, walk you through material options and hand you a written line-item quote with pricing locked in before work starts. Calls are answered by a live person 24/7, and there’s no pressure to book on the spot. Entries, interior doors, patio doors – we cover them, at upfront pricing with no surprises.
Written by the team at Groundwork Construction Co.