Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Concord: What the Job Actually Involves
Backsplash, tile and flooring work in Concord usually runs $14,000 – $45,000 for a full kitchen package (tile floor plus backsplash) and $800 – $2,500 for a backsplash on its own, with most jobs finished in three to seven working days once materials are on site. A straightforward backsplash alone is often a one- to two-day job. Call (888) 419-3650 and we’ll walk your kitchen and give you a written, line-item number before anyone touches a trowel.

Key Takeaways
- Backsplash-only in Concord: $800 – $2,500. Tile flooring adds the larger share of cost.
- Full backsplash, tile & flooring packages here run $14,000 – $45,000 depending on square footage and material grade.
- Most single-room jobs finish in under a week; layout changes and substrate repairs push it longer.
- Permits usually aren’t required for a like-for-like backsplash swap, but structural or plumbing moves change that.
- Every project is covered by our 730-Day Done Right Promise, in writing.
How a backsplash and tile floor comes together, stage by stage
Tile work fails or succeeds on what happens before the first tile is set. Here’s the real sequence we run on a Concord kitchen.
Stage 1 – Measure, mock-up, and lock the layout (1 – 2 hours). We template the backsplash run and the floor field, decide where the layout starts and ends, and settle the pattern. This is where you pick the tile size and grout line width. Getting the layout right here saves you from a sliver-cut row at the end of a counter.
Stage 2 – Protection and demo (half a day to a day). Floors get covered, appliances get pulled or masked, and old backsplash or flooring comes out. Underlayment and any rotted substrate get inspected. On older Concord ranch homes we often find drywall or subfloor damage that wasn’t visible under the old surface. You approve the repair before we continue.
Stage 3 – Substrate and waterproofing (one day). Floors get leveled or backer board set; wet-area backsplash gets waterproofed and taped. This is the stage most cut-rate crews skip, and it’s the reason tile cracks or grout fails a year later. We don’t skip it.
Stage 4 – Tile setting (one to three days). Floors go in first, then backsplash. Large-format tile runs faster per square foot; mosaic and herringbone take longer. You’ll see the room come back together here.
Stage 5 – Grout, seal, and final walkthrough (half a day to a day). Grout cures, sealant goes on where the tile meets counter and cabinet, and we walk the job with you. Anything that doesn’t meet the standard gets fixed before we leave.
At every stage, the decisions are yours to make on your timeline. We tell you what needs deciding and when; we don’t decide for you.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
There’s no single “right” tile. There’s the tile that suits your kitchen, your budget, and how you actually use the room. Here’s the honest breakdown of the choices.
- Ceramic vs. porcelain floor tile. Ceramic is the budget-friendly choice and holds up in low-traffic kitchens. Porcelain is denser, more water-resistant, and tougher under foot traffic – it costs more but lasts longer in a busy household.
- Large-format vs. standard tile. Large-format (12×24 or bigger) means fewer grout lines and a cleaner look, but it needs flatter substrate and costs more per square foot to set. Standard 4×4 and subway tile are classic and forgiving.
- Backsplash material. Ceramic subway is the value pick. Porcelain and glass are more stain-resistant. Natural stone (travertine, marble) looks great but needs sealing and shows wear faster in a working kitchen.
- Grout line width and color. Narrow lines read cleaner; wider lines hide small layout imperfections. Contrasting grout pops the tile pattern; matched grout reads uniform.
- Underlayment and waterproofing. The unseen choice that determines how long the tile lasts. We use proper backer board and waterproof membrane in wet areas by default – this is not optional in our bids.
For a more involved material selection – vanities, fixtures, and pairing flooring with the rest of the bathroom – see our Vanities, Tile & Fixtures in Concord page. And if the tile work is part of a full Kitchen Remodeling in Concord project, we coordinate the whole scope.
What backsplash, tile & flooring costs in Concord, CA
Most backsplash, tile and flooring jobs in Concord land between $14,000 and $45,000 when you’re doing the full kitchen package. A backsplash by itself runs $800 – $2,500. Flooring is the variable that moves the total most – square footage and material grade drive that number.

| Line item | Typical range (Concord) |
|---|---|
| Backsplash installation only | $800 – $2,500 |
| Tile flooring (kitchen) | $3,000 – $10,000+ |
| Full backsplash + flooring package | $14,000 – $45,000 |
What pushes a job to the high end: larger square footage, natural stone or large-format tile, substrate or drywall repair uncovered during demo, relocating a sink or electrical outlet, and any structural change. What keeps it low: a simple like-for-like swap with sound substrate and standard ceramic or porcelain tile.
Written estimates spell out materials, labor, prep, and cleanup – and our upfront pricing means the number you see is the number you pay. No change orders for work we should have scoped up front.
See the difference
Before
After
Before
After
Before
AfterWhat Concord homes specifically do to this job
Concord’s housing stock is dominated by post-WWII and 1950s – 70s single-story ranch tract homes, plus denser mid-century apartments and condos near the downtown and BART corridors. That build era means original slab foundations, aging galvanized or early copper plumbing, and shallow-pitch roofs. When we open a wall for a backsplash in a 1960s Concord ranch, we regularly find original 1950s – 60s additions built without permits – which can mean the wall behind the tile isn’t where the plans say it should be. We also see the mid-century tile and linoleum that’s been under the same counter for decades, sometimes hiding moisture damage from a slow leak. Those surprises get handled before tile goes up, not after.
Concord also sits at the transition between the cool Diablo Valley floor and the hot inland slopes of Mount Diablo. That gradient matters here: the same subdivision can have marine-layer moisture issues on the west side and extreme summer heat exposure uphill. It’s why we don’t skip waterproofing on backsplash wet areas and why flooring substrate prep differs house to house. Around ZIPs 94519 and 94522, the older tract homes tend to need more substrate repair; homes toward the Mount Diablo foothills see more heat expansion in tile joints. Our technicians have up to 12 years of experience reading those signs. See how we cover the full Concord service area, and if the wider project includes plumbing or fixture work, homeowners often pair this with a Tub-to-Shower Conversion in Concord or a full Kitchen Remodeling scope.
Serving Concord, CA – Our Local Coverage Area
We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Backsplash, Tile & Flooring in Concord
A backsplash-only job takes one to two days; a full kitchen tile floor plus backsplash runs three to seven working days once materials are on site. Layout changes, substrate repairs, or custom patterns push that longer. Call (888) 419-3650 and we’ll give you a realistic timeline for your specific kitchen – the estimate is free.
No permit is required for a like-for-like backsplash or flooring swap. You do need one when the job involves relocating plumbing or electrical, structural changes, or finishing a previously unpermitted addition – which is fairly common in older Concord tracts. We pull the permits and pass the inspections when they’re needed. Call us for a straight answer on your project.
Yes. Most backsplash jobs go in over the existing wall and existing outlet locations. If you want to add outlets or move a sink, that’s a different scope and we’ll tell you what it adds to cost and timeline before we start. Call (888) 419-3650 to talk through what’s possible.
Backsplash-only runs $800 – $2,500; a full kitchen backsplash plus flooring package runs $14,000 – $45,000 depending on square footage, material grade, and substrate condition. Call (888) 419-3650 for an exact line-item quote – the estimate is free.
Every Groundwork project carries our 730-Day Done Right Promise – if it’s not done right, we make it right, in writing. That covers workmanship and installation, not wear from daily use. Call us to talk through the details for your project.
Ready to price your Concord tile and flooring project?
Call (888) 419-3650 to schedule a free on-site estimate for backsplash, tile and flooring in Concord. We answer live, around the clock. On the visit, we’ll measure your kitchen, look at what’s under the surface, and hand you a written, line-item quote – materials, labor, prep, and timeline all spelled out. No surprises, no games. Background-checked, uniformed technicians on every job.
Written by the team at Groundwork Construction Co.