Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Concord, CA
Custom & Geometric Windows in Concord, CA run roughly $6,500 to $22,000 installed, with most of the mid-century ranchers here landing between $9,000 and $15,000. The job covers anything that isn’t a standard rectangle: trapezoids under a gable, arches, half-rounds, angled bays, corner glass that wraps a wall, and circles or ellipses that need a templated frame. Realistic timeline is three to six weeks from template to final inspection, and the window unit order itself eats most of that. Call (888) 419-3650 for a free on-site measure and a written line-item quote.
How our Custom & Geometric Windows process works, from template to final inspection
Custom and geometric units don’t get ordered off a size chart. Every one is templated off the actual rough opening, so the sequence matters more than the sales pitch. Here’s what actually happens on a job like this in Concord.

Stage 1: On-site measure and template (day 1, about 2 hours)
We measure the rough opening at multiple points, check the wall for plumb and square, and take a physical template for any non-rectangular unit including the arch, angle, or radius. Any hidden condition (rot behind the casing, out-of-square framing, a prior unpermitted addition that changed the wall line) gets documented the same visit. You decide the material family and finish at this point, because it drives the lead time.
Stage 2: Shop drawings and your approval (days 3-10)
The manufacturer produces a shop drawing with exact dimensions, radius, muntin pattern, and glazing spec. You sign off on that drawing before anything is cut. This is the step most homeowners don’t realize exists, and it’s the one that prevents a $4,000 arc unit from arriving three inches too narrow. Approval turnaround is on you, usually 2-4 days.
Stage 3: Fabrication and lead time (weeks 2-5)
Geometric and arch units move slower than stock because of the curve, the glazing thickness, and the low-volume assembly. Expect 3-5 weeks for most shapes, longer for oversize corner glass or a unit that has to match existing trim profile. We give you the ship date in writing at approval.
Stage 4: Tear-out and install (1-3 days on site)
Old unit comes out, the opening gets squared and flashed, and the new frame sets into a fully shimmed and sealed rough opening. Any deteriorated framing or wall sheathing behind the old unit gets replaced before the new window goes in. Stucco patching and interior trim happen the same visit on most jobs.
Stage 5: Sealing, trim, and final inspection (same day plus permit close-out)
Exterior flashing tape, sealant, and the final trim go on last. We walk the opening with you, water-test the exterior seal, and hand over the manufacturer’s spec sheet plus our 730-Day Done Right Promise in writing. Permit inspection closes within about a week of completion.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Custom & Geometric Windows options you’ll choose between
Material and shape choices drive both the price and how the window holds up against Concord’s wind and heat. Here’s how the real trade-offs stack up.
- Wood-clad (Andersen, Marvin): Best finish flexibility for geometric shapes because the manufacturer can fabricate a true radius. Interior stays warm wood, exterior takes a low-maintenance aluminum or vinyl cladding. Costs more, typically $1,200-$2,800 per unit installed for complex shapes, but the only option that holds a sharp arc over twenty years.
- Vinyl with a reinforced core: The value play for rectangular and simple angle units, but most vinyl lines top out at standard shapes. Good choice where the geometry is mild (a half-round transom, an angled bay) and cost matters more than finish detail.
- Fiberglass: Strong thermal movement and stable in heat, which matters on the sunny Mount Diablo side of town. Limited shape range; good where you can accept a factory rectangle and add the geometric character through the surrounding trim instead.
- Aluminum-clad or steel-frame: The right pick for a modern wall of glass or an oversize corner unit where you want narrow sightlines. Higher cost, some thermal penalty unless you spec a thermal break.
- Glazing and coating: Low-E with a solar-control coating cuts summer heat gain on east and west elevations. Tempered or laminated glass for any unit that’s within 18 inches of a floor or spans a door-side panel.
What Custom & Geometric Windows cost in Concord, CA
Custom & Geometric Windows here typically run $6,500 to $22,000 for a small project, and a whole-house geometric package can push toward $25,000. The two published ranges that bracket this work are impact window installation at $8,000 to $25,000 and standard window replacement at $4,500 to $15,000; geometric and arched units sit in the upper half of that band because of the fabrication premium.
What pushes a job to the high end:
- Shape complexity: True radius or ellipse glass costs 40-60% more than a mitered angle or a rectangle with a transom.
- Size and glazing spec: Oversize units need thicker glass, heavier framing, and sometimes a header or structural bracket.
- Existing condition: Rot, out-of-square framing, or a prior unpermitted addition to the wall line adds demo and rebuild time.
- Material grade: Wood-clad arcs vs. vinyl half-rounds can double the per-unit cost.
- Permit and inspection scope: Structural opening changes require plans and a longer permit cycle, which adds days not dollars in most cases.
A written estimate includes templating, fabrication, delivery, installation, exterior flashing and sealant, interior trim, and permit close-out. It typically does not include stucco or siding repaint on the patch, interior drywall patching beyond a basic finish, or structural framing if the opening has to change size.

See the difference
Before
After
Before
After
Before
AfterWhat Concord homes specifically do to this job
Concord sits at the transition between the cool, fog-influenced Diablo Valley floor and the hot inland slopes of Mount Diablo, so construction here constantly juggles microclimates. The same subdivision can have marine-layer-driven moisture issues on the west side and extreme summer heat exposure uphill, driving different window detailing within a mile. A geometric window on the fog side of the tract is fighting condensation and wood rot; the same unit uphill is fighting UV and thermal expansion. We specify glazing and cladding differently for each, and we tell you which one your house is asking for.
Most of the housing stock we work on here is post-WWII and 1950s-70s single-story ranch tract homes, with denser mid-century apartments and condos near downtown and the BART corridors. In the older Concord tracts we regularly find original 1950s-60s additions built without permits and shallow-pitch roofs pooling water during the first big winter storms, which means a “simple” window swap sometimes uncovers framing that was never right. Across ZIP codes 94518, 94527, 94519, and 94522, we’ve templated arches for ranchers along the Monument Boulevard side and half-rounds for hillside homes off the Mount Diablo foothills. If the wider project includes reworking wall openings, homeowners often pair this with Concrete Driveways & Concrete Work in Concord to fix drainage before the wet season, or with Asphalt Driveways & Resurfacing in Concord to bring the approach back into line with a fresh front elevation.
Permitting runs through the City of Concord Building Division and, for any structural opening change, requires plans plus a framing inspection before final. We pull the permits and pass the inspections. If you’re weighing the whole elevation rather than one window, see our Windows & Doors in Concord page for the broader scope, and the Windows & Doors service hub for the full service catalog. We cover the entire city and surrounding areas from our Concord service area.
Serving Concord, CA – Our Local Coverage Area
We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Custom & Geometric Windows in Concord
Most jobs take three to six weeks from template to final inspection, with installation itself only one to three days on site. The rest of the time is shop drawings, your approval, and fabrication. Call (888) 419-3650 for a schedule tied to your specific shapes.
Yes, any new or replacement window that changes the opening size or framing needs a permit through the City of Concord Building Division. Like-for-like swaps in the same rough opening sometimes don’t, and we confirm the requirement for your exact address before we start. We pull permits and pass inspections on every job that requires it.
In most cases yes, because the geometric unit is templated to the existing rough opening. If the opening has to grow or shrink for the new shape, framing changes and a permit follow. Plumbing is almost never touched on a window job unless a radiator or hydronic line is in the wall.
Expect $6,500 to $22,000 installed, with most jobs landing between $9,000 and $15,000. True arcs and oversized corner glass sit at the top of that band; simple angled bays and half-rounds sit lower. Call (888) 419-3650 for a written line-item quote with upfront pricing, no surprises.
Every installation is covered by the 730-Day Done Right Promise in writing, in addition to the manufacturer’s product warranty on the unit and glazing. If something isn’t right, we make it right. Details go on your estimate so you have it in hand.
Get a free estimate for Custom & Geometric Windows in Concord
Custom and geometric windows reward a careful template and a written quote, not a rushed bid. We come out, measure the opening, take a template for the shape, and hand you a line-item estimate with the exact lead time and the brand of unit. Calls are answered by a live person 24/7, so call (888) 419-3650 and we’ll schedule your free estimate for Custom & Geometric Windows in Concord.
Written by the team at Groundwork Construction Co..