Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fence Repair in Concord, CA: What It Costs and How Long It Takes
Fence repair in Concord, CA runs $3,500 – $9,000 for the typical repair-and-rebuild scope we see on the city’s mid-century lots, and most jobs wrap in one to three days once materials are on site. Simple fixes – a leaning run of posts, a handful of storm-loosened pickets, a gate that won’t latch – often land under that range. Call (888) 419-3650 and we’ll walk the fence with you, free, and write a line-item estimate before any board comes off.

How Our Fence Repair Process Works, Stage by Stage
Fence repair isn’t a single act – it’s a short sequence, and skipping a step is how a repair turns into a tear-out two winters later. Here’s the real order of operations on a Concord job.
Stage 1 – Walk-through and rotted-post probe (30 – 45 minutes)
We inspect every post at the soil line, the spot where water collects and rot starts. We also check for frost heave and drainage issues at the base and note which rails have sagged from wind load on the inland slopes. You decide at this stage whether the repair stays cosmetic or extends to the posts – that decision drives everything after.
Stage 2 – Written line-item estimate (same visit)
You get a written scope that names exactly what’s being replaced, what’s being re-set, and what’s staying. Upfront pricing, no surprises – the number you see is the number you pay, and there are no change orders buried at the end. This is where you decide material grade (see the options section below) and whether to match existing boards or replace the whole run.
Stage 3 – Demolition and prep (half a day)
Damaged pickets, rails, and failing posts come out, and we pull the old concrete footings with a truck-mounted auger rather than busting them out by hand. Ground around each post gets re-graded so water sheds away from the new wood or vinyl. On older Concord lots this is also when we hit the surprise – a fence line that overlaps a neighbor’s property or an old utility easement the original builder never recorded.
Stage 4 – New footings and re-set (one to two days)
New posts go in at 6 to 8 feet on center, set in concrete and left to cure before rails go up. We square each gate opening to the frame rather than trusting the old hinge holes. On coastal-influenced yards, fasteners go in as hot-dipped galvanized or stainless so the first foggy spring doesn’t start the rust clock early.
Stage 5 – Reassembly, gate hang, final walk (one day)
Boards, rails, and the gate go back on, then we walk the line with you and check every latch, hinge, and post for movement. You sign off, and the work is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most Concord fence repairs are decisions about materials matching the existing run and how much of the fence you’re willing to touch. Here’s the honest trade-off on each.
- Repair-and-match (cheapest, $3,500 – $5,500): Replace only what failed and match the existing boards. Good when the original wood is still solid and you want the fence to look continuous. The downside is that mismatched weathering shows for a season or two until the new boards gray in.
- Partial rebuild ($5,000 – $7,000): Replace one full run – posts, rails, boards – and tie into the sound sections. The best value when two or three posts have rotted but the rest is holding. You keep a consistent look on the visible sides and leave the back run alone.
- Full-line rebuild with upgraded posts ($7,000 – $9,000): All new posts on concrete footings, hot-dipped galvanized hardware, and a material upgrade. This is where we bring in Belgard or Techo-Bloc hardscape elements if the fence meets a patio or a driveway edge, so the two systems line up instead of fighting each other.
- Material grade: Pressure-treated pine is the workhorse and lasts 15 – 20 years in this climate with a good stain schedule. Cedar resists rot better and takes stain more evenly, at roughly 20 – 30% more per board foot. Composite and vinyl skip the staining entirely but cost more upfront and can’t be patched the way wood can.
- Hardware: stainless or hot-dipped galvanized fasteners and hinges run a few hundred dollars over standard zinc, and they’re the single most important upgrade on a fence that faces marine-layer moisture.
What Fence Repair Costs in Concord, CA
Expect $3,500 – $9,000 for fence repair in Concord, with the typical job landing around $5,500. The range is wide because five things move the number more than anything else:

- Linear footage being repaired: a 20-foot section is a different job from 120 feet.
- Post condition: fence repair that stops at boards and rails is cheap; once posts and footings have to come out, you’re paying for concrete, labor, and cure time.
- Material grade: the jump from pressure-treated to cedar or composite can add 20 – 40% to the material line.
- Access and slope: hillside lots toward the Mount Diablo foothills need stepped panels and more labor per foot than a flat run.
- Permit scope: cosmetic repair usually doesn’t trigger a permit; a full replacement to a new height or line sometimes does, and that adds time and a fee.
Every written estimate includes demolition, disposal, new footings, materials, and the workmanship warranty. It does not include fence staining (we quote that separately), landscape repair around the post holes, or property-line surveying if the line is in dispute – those get flagged in writing before we start, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Concord Homes Specifically Do to This Job
Concord sits where the cool, fog-influenced Diablo Valley floor meets the hot inland slopes of Mount Diablo, and that gradient shows up in fences within a single subdivision. On the west side, marine-layer moisture moves into post bases and rail ends and accelerates rot; uphill, the same fence dries out hard under summer heat and splits along the grain. A fence on one side of the street can fail one way while the neighbor’s fails the other. Most of the properties we work on are the post-WWII and 1950s – 70s ranch tract homes, and we regularly find original 1950s – 60s additions and old fence lines built without permits – which matters when a repair gets close to a property line. Drive the older tracts in the 94519 and 94522 ZIPs and you’ll see it: shallow-pitch roofs pooling water in winter storms and fence posts that have quietly rotted from the bottom up. Whether the fence line is at the valley floor or up toward the foothills, the fix is the same conversation: probe the posts, decide repair versus partial rebuild, and price it in writing before we touch a board. If the fence work is part of a bigger backyard plan, homeowners often pair this with ADU Design & Permitting in Concord or a Garage Conversion ADU in Concord, and we’ll line the fence work up with the larger scope so nothing gets built twice. For the wider project, our Fence Installation in Concord page covers the full build, and if you’re mapping out what we cover across the city, start with our Concord service-area page.
Serving Concord, CA – Our Local Coverage Area
We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Fence Repair in Concord
Most fence repair jobs take one to three days: a half-day for demolition and prep, one to two days for new footings and re-set, and one day for reassembly and the gate hang. Call (888) 419-3650 for a timeline on your specific fence.
Cosmetic repair – swapping boards, rails, or a gate – generally doesn’t need a permit, but a full replacement to a new height or property line often does. We check the permit scope before work starts and put it in writing, and you’ll know exactly what’s required on your lot. Call (888) 419-3650 and we’ll walk it with you.
Yes, and that’s the most common job we do. We replace only the posts, rails, and boards that have actually failed and tie the new section into the sound run, so you keep a consistent look without paying for a full rebuild. Call (888) 419-3650 for a free estimate.
Fence repair in Concord typically runs $3,500 – $9,000, with partial repairs at the low end and a full-line rebuild with upgraded posts and stainless hardware toward the top. Call (888) 419-3650 for an exact quote – estimates are free.
Every fence repair we do is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship for two full years, and the material warranty follows the manufacturer’s terms. Call (888) 419-3650 to schedule your free estimate.
Schedule a Free Fence Repair Estimate in Concord
When you call (888) 419-3650, a live person answers any hour, any day – no voicemail, no waiting until Monday. We’ll set a free on-site estimate, walk your fence line, probe the posts, and hand you a written line-item quote with no-hassle upfront pricing. Our technicians bring up to 12 years of experience to the job and show up background-checked and in uniform. Estimates are free, and $1,000 off projects over $10,000 applies if the scope grows.
Written by the team at Groundwork Construction Co.