A Groundwork company - serving Antioch, CA
Iron Fence in Concord, CA | Groundwork Construction Co. of Antioch

Iron Fence in Concord - Free Quote, Property Line & Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Iron Fence in Concord, CA: What It Costs and How It’s Built

An iron fence in Concord, CA typically runs $3,500 – $9,000 for a typical residential run, installed with set posts, a real footing and a finish that survives the valley’s dry summers. Most jobs take three to five working days from layout to cleanup. Call (888) 419-3650 and we’ll walk your property, measure the run honestly, and put a written line-item number in your hands before anyone swings a shovel.

professional fence installation service in Concord, CA

Call (888) 419-3650

How We Build an Iron Fence, Start to Finish

Iron work rewards patience at the front end. Skip a step here and you’ll see it in a leaning post or a bubbling finish two winters later. Here’s the actual sequence, with what each stage takes and what we need from you.

Stage 1: On-site measure and layout (day 1, half a day)

We walk the property line with you, confirm the actual lot boundary against your plat or survey, and mark every post location with paint or stakes. On older Concord lots we sometimes find the fence line doesn’t match the property line by a foot or more, and that conversation has to happen before anything is ordered. You decide fence height, gate placement and which side faces out. That’s also when we flag any utility locates that need to be called in before digging.

Stage 2: Demo and site prep (day 1 – 2)

If an old fence is coming out, that happens now: tearing down panels, pulling old posts and footings, and hauling it off. Sloped yards toward the foothills are the ones that eat time here, since post height has to be stepped or racked to follow grade without leaving a gap under the panels. You decide whether any existing concrete, planter beds or irrigation lines stay or go.

Stage 3: Post footings and curing (day 2 – 3)

Posts get set in augured holes with concrete footings below your frost line, plumb and braced, then left to cure. Iron is unforgiving – a post set an inch off-plumb stays off-plumb for the life of the fence. This is the slowest-feeling day because nothing visible happens, and it’s the one we don’t rush. You don’t have to decide anything; you just have to let the concrete do its work.

Stage 4: Panel hang and hardware (day 3 – 4)

Once footings are hard, panels go up, gates get hung with proper hinges and a latch that actually lines up, and everything gets tensioned and checked for square. Adjustable hinges on the gates matter more than people expect, because iron doesn’t give the way wood does, and gate sag is the number one callback on this job.

Stage 5: Finish, touch-up and walkthrough (day 4 – 5)

We touch up every scratched weld and cut end, confirm the finish coat is even, and walk the run with you. You sign off on gates, latches and the finished height. Any punch items get scheduled before we pull off the site.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Iron Fence Options You’ll Choose Between

The two big forks in the road are material type and finish, and they drive both the look and the price.

  • Wrought iron (traditional): Real forged or solid-bar iron, welded or riveted. The heaviest look, the longest life, and the top of the price range. It suits a period home or a lot where the fence is meant to read as architecture, not just a boundary.
  • Ornamental steel: The most common choice today. Steel bar with a forged look, welded panels and a powder-coat finish. Nearly the same appearance as wrought iron at a lower cost, and it holds up well in the East Bay climate.
  • Aluminum (steel-look): Lighter and rust-resistant, easy to maintain, less expensive – but it won’t take a hit the way steel will. Fine for a decorative run, less so for a busy driveway gate.
  • Finish: Powder coat is the standard and the most durable; a bare or painted finish costs less up front and asks for repainting every few years. For Concord’s hot, dry summers we lean powder coat every time.
  • Configuration: Height (4 ft, 5 ft or 6 ft), picket spacing, finial style, gate style and whether the run steps or racks on a sloped yard. Each of these is a real line item, not a rounding error.

Brands matter most on the finish and hardware side. We work with established fence and gate hardware lines and will never spec a finish we haven’t seen hold up through a few summers.

Worker installing a metal fence post with wet concrete and level. in Concord, CA

What an Iron Fence Costs in Concord, CA

Residential iron fence in Concord lands between $3,500 and $9,000 for a typical front or side-yard run. That’s a real range, not a teaser – and here’s what moves a job to the low end versus the high end.

  • Linear footage: The biggest lever. A short side-yard run sits near the bottom; a full front perimeter plus a driveway gate sits near the top.
  • Material grade: Aluminum or lighter ornamental steel lands toward $3,500 – $6,000; heavier steel or true wrought iron moves toward the $7,000 – $9,000 end.
  • Existing conditions: Removing an old fence, breaking out old footings, or dealing with rocky or sloped ground adds labor. A clean, level, fence-free yard stays near the low end.
  • Gates: A single pedestrian gate is modest; a wide driveway gate with heavier hinges and a self-closing latch costs meaningfully more.
  • Finish and height: Powder coat over a bare finish, and 6 ft over 4 ft, each push the number up – usually a few hundred dollars per run, not thousands.

Your written estimate lists the footage, the material grade, the finish, gate count and hardware, plus demo and haul-away where it applies. It does not include utility relocation, extensive concrete work, or repairs to an existing wall or retaining structure – those get priced separately once we see them. Upfront pricing, no surprises, and the number you see is the number you pay.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Concord Homes Do to an Iron Fence Job

Concord’s housing stock is the reason this job has its own quirks. The city is dominated by post-WWII and 1950s – 70s single-story ranch tract homes, and in those older tracts we regularly find original 1950s – 60s additions built without permits – which means the “back corner” of the lot isn’t always where the plat says it is. Add the valley-to-foothill gradient, with marine-layer moisture on the west side and extreme summer heat uphill, and you get two different fences within a mile needing two different finishes. Along the downtown and BART corridors the mid-century apartments and condos often share fence lines with neighboring parcels, so boundary confirmation matters before we dig. Hillside lots toward the Mount Diablo foothills bring slope, drainage and wind exposure that flat-lot fences never see. And because the East Bay now leans on seismic retrofits for older unbolted foundations, we plan post footings that won’t fight a future retrofit and route gates so they don’t block access to the crawlspace or foundation work. Whether we’re covering the 94518, 94527, 94519 and 94522 ZIPs, we pull the required permits and schedule the inspection before the job is called done.

Serving Concord, CA – Our Local Coverage Area

We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked: Iron Fence in Concord

Get a Free Iron Fence Estimate in Concord

Call (888) 419-3650 for a free on-site estimate. A live person answers, day or night, and can book a walk-through that fits your schedule. We’ll measure your run, talk through material and finish options, and hand you a written line-item quote you can compare against anyone. Part of a full Fence Installation in Concord project, or paired with a new walkway under our Fence Installation service? Either way, you get the same upfront number and the same 730-Day Done Right Promise covering Concord. Homeowners often pair this with Patios, Walkways & Pool Decks in Concord or an ADU Design & Permitting in Concord job. One call, one plan.

Written by the team at Groundwork Construction Co.

Why Concord Chooses Groundwork Construction Co. of Antioch

We set the standard for iron fence in Concord.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Concord

Getting your iron fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your iron fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local iron fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Concord Customers Say

Trusted by homeowners across Concord and surrounding areas.

★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan

Ready for Iron Fence in Concord?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Concord.

(888) 419-3650

Request a Free Estimate in Concord

Tell us about your iron fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - 24/7 Dispatch