Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tile Roofing in Alamo, CA: What the Job Actually Involves
Tile Roofing in Alamo, CA usually runs $600 – $2,500 for a targeted repair and $8,000 – $20,000 for a full tile roof replacement, depending on roof size, tile type, and how much underlayment and flashing has to be rebuilt. A repair is often a one- to two-day job; a full tear-off and re-roof on a large estate parcel typically takes five to ten working days, weather permitting. Call (888) 419-3650 and we’ll give you a written, line-item estimate before anything gets torn off.

How a Tile Roofing Project Moves, Stage by Stage
Tile work is slower and more sequential than asphalt work because almost everything that matters sits underneath the tile you can see. Here’s the real sequence.
Stage 1: Inspection and moisture mapping (day 1)
We start on the roof and in the attic. The goal is to find where water is actually getting in versus where it’s just showing up on the ceiling, because on a clay-heavy hillside lot the two are rarely in the same place. We check underlayment condition, flashing at valleys and penetrations, tile breakage, and the deck itself. You get photos of every problem area and a written scope before we quote.
Stage 2: Underlayment and prep (days 1 – 3)
Tiles come up in carefully stacked lifts so the ones that survive can go back down. The old underlayment comes off, the deck gets inspected for rot and re-nailed to current shear requirements where needed, and new high-temperature underlayment goes down. This is the stage that quietly determines whether your roof lasts twenty years or eight – the tile is the armor, the underlayment is the waterproofing.
Stage 3: Flashing and edge metal (day 3)
Valley metal, step flashing at sidewalls, counterflashing at chimneys, and eave and rake closures all get replaced or fabricated new. On Alamo’s estate homes with multiple rooflines, dormers, and detached structures, this is often the longest single stage. You’ll approve the flashing detail at any transition where the old roof met a stucco wall or a second-story deck.
Stage 4: Tile setting (days 3 – 7)
Field tile, hip and ridge tile, and any specialty pieces go back down. Mortar-set or foam-set ridge and hip treatment is a real decision point here – mortar is traditional and repairable, foam is faster and cleaner but needs periodic inspection. We’ll walk you through which fits your roof pitch and your tolerance for maintenance.
Stage 5: Final inspection and walkthrough (day 7 – 10)
We sweep for broken tile, check every penetration, run a water test on the most vulnerable valleys, and walk the roof with you. The county inspection gets scheduled and passed before we call the job closed. Everything is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make: Tile Type, Underlayment, and Trim
There’s no single right answer here. The right tile for an Alamo estate on Stone Valley Road with a low pitch is not the right tile for a steep Mediterranean roofline. Here’s what actually gets decided.
- Clay vs. concrete tile. Clay barrel and S-tile have the classic look and hold color for decades, but they’re heavier, more brittle on install, and pricier per square. Concrete tile costs less, comes in a wider color range, and is the workhorse choice for most Alamo re-roofs – but it fades slightly over twenty to thirty years where clay doesn’t.
- Flat vs. profile tile. Flat concrete or clay tile suits low-slope ranch rooflines; barrel and high-profile tile suit the Mediterranean and Spanish Colonial stock common in the valley. Profile choice drives both material cost and the labor per square.
- Underlayment grade. A standard 30-pound felt underlayment versus a high-temperature self-adhered membrane is a several-thousand-dollar decision on a large roof. On a hot, dry San Ramon Valley roof, we lean toward the higher-grade membrane because the tile bakes the underlayment from above.
- Ridge and hip treatment. Mortar-set, foam-set, or mechanical dry-fixed ridge. Dry-fixed is the fastest and needs no repointing, but it’s not the right look on every roof. Mortar is repairable and traditional. Foam is a middle ground.
- Color and finish. Through-body color versus surface-coated. Through-body holds up better under UV; surface-coated costs less but can show wear faster on the sunny south-facing slopes.
We work with GAF, CertainTeed, and other top-tier manufacturers across our trades – the same quality-first approach we bring to every roof we touch.
What Tile Roofing Costs in Alamo, CA
Tile Roof Repair in Alamo runs $600 – $2,500 and full Roof Replacement runs $8,000 – $20,000. Those two numbers anchor everything below.
Here’s the line-item breakdown so you know what you’re actually paying for:

| Scope item | Typical range |
|---|---|
| Targeted tile repair (broken tile, small flashing leak) | $600 – $2,500 |
| Full tear-off and tile re-roof with new underlayment | $8,000 – $20,000 |
| Underlayment upgrade to high-temp self-adhered membrane | Mid four figures on a 3,000+ sq ft roof, quoted separately |
| Ridge and hip re-set (mortar or foam) | Quoted as a line item, scaled to linear footage |
What pushes the number to the low end: a smaller footprint, intact tile that can be re-used, minimal flashing work, and standard concrete tile. What pushes it high: a large and complex roofline with multiple valleys and dormers, rot in the deck or fascia, damaged or discontinued tile that has to be replaced with new stock, and any scope that triggers structural repair or additional inspection.
Every written estimate from us is fixed – the number you see is the number you pay. If we open the roof and find something that genuinely wasn’t visible, you get a written change order before any work continues. No surprise line items after the job starts.
See the difference
Before
After
Before
After
Before
AfterWhat Alamo Homes Do to a Tile Roofing Project
Alamo is unincorporated, and that changes the paperwork. Nearly every project here runs through Contra Costa County rather than a city building department, and on hillside parcels off Stone Valley Road and similar roads, geotechnical and slope-stability review often becomes part of the permit scope in a way a flat-lot Danville project would never see. Plan on extra time at the permitting stage – usually a couple of weeks, longer if the lot has a history of slope work. We pull the permits and see the inspection through; it’s not a favor, it’s the job.
The housing stock matters too. Most of the tile roofs we work on in Alamo sit on custom ranch and Mediterranean estates built from the 1950s through the 2000s on half-acre to multi-acre lots, frequently with detached guest houses, pool houses, and older outbuildings that each carry their own small roof. When we quote a main house, we also look at those secondary structures – they fail on the same schedule and it’s cheaper to catch them at the same time. On 94507 homes, we regularly see underlayment that hit its useful life a decade ago while the tile above still looks fine, and clay-heavy soils that hold winter moisture against the fascia and eave.
Summer heat and Diablo-wind exposure make Class A assembly and ember resistance a real design conversation here, not a checkbox. If you’re thinking about the wider exterior, this work is often part of a full Roofing in Alamo plan, and homeowners often pair it with Impact Windows & Doors in Alamo or Energy-Efficient Windows in Alamo to lock in the whole envelope at once. You can see the rest of what we cover on the Roofing service page, and the broader Alamo service area if you want to know how we work here.
Serving Alamo, CA – Our Local Coverage Area
We serve Alamo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tile Roofing in Alamo
Five to ten working days for most Alamo estate homes, weather permitting. Larger roofs with multiple rooflines and detached structures sit at the ten-day end; a smaller single-structure reroof can land in five. We give you a written start and finish date up front and call you the same day if anything pushes it. Call (888) 419-3650 for an exact timeline on your roof – the estimate is free.
Yes – re-roofing in unincorporated Alamo goes through Contra Costa County, not a city building department, and hillside parcels sometimes add geotechnical review. We pull the permit and manage the inspection, so you’re not the one chasing it. Call (888) 419-3650 and we’ll tell you what your specific lot needs.
In most cases, yes. Tile work is a roof-plane job – plumbing vents and chimney flashing get reworked around, not relocated, and structural repair only comes into play if we find rot in the deck or rafters. If we do, you get a written change order before we touch it. Call (888) 419-3650 to schedule the inspection that answers this for your roof.
Tile Roof Repair in Alamo runs $600 – $2,500 and full Roof Replacement runs $8,000 – $20,000. Repair wins when a handful of tiles are broken or one flashing detail is leaking; replacement wins when the underlayment has aged out under the tile, which is common on Alamo roofs from the 1970s and 1980s. Call (888) 419-3650 for a written line-item quote on both – estimates are free.
Every tile roofing project we do is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s on top of the manufacturer warranty on the tile and underlayment. You get the whole thing in writing before we start. Call (888) 419-3650 and we’ll walk you through the coverage.
Get a Written Tile Roofing Estimate in Alamo
Call (888) 419-3650 and a live person picks up – day, night, weekend. We’ll schedule a free on-site estimate, walk the roof with you, show you photos of what we find, and hand you a written, line-item quote with fixed pricing and no change orders. Financing options are available, and projects over $10,000 qualify for $1,000 off.
Written by the team at Groundwork Construction Co.