Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Brentwood, CA: What It Costs and How Long It Takes
Concrete driveways and flatwork in Brentwood, CA typically run $4,500 – $12,000 for a standard residential driveway pour, and a full replacement lands between $5,000 and $14,000. Most driveways take 3 to 5 working days from demo to the day you can park on them, though Brentwood’s summer heat over 100°F can stretch the cure window by a day or two. Call (888) 419-3650 for a free on-site estimate with a written line-item quote.

How a Brentwood Concrete Pour Actually Runs, Stage by Stage
Concrete work isn’t something we hand-wave. You should know what happens on day one, what gets inspected, and where you’ll be asked to make a decision. Here’s the real sequence.
Stage 1: Layout, grade and excavation (day 1)
We set string lines and stake the driveway footprint, then cut and remove the old slab or strip the topsoil down to the subgrade. On former orchard parcels around Brentwood, excavation sometimes turns up old furrow lines, buried irrigation pipe or a stray valve box, and those get pulled and disposed of properly before anything else moves forward. You decide the driveway width and slope at this stage – a 10-foot single-car apron versus a 16- to 20-foot double is the biggest single lever on your price.
Stage 2: Sub-base, forming and reinforcement (day 2)
We bring in and compact 4 to 6 inches of Class II aggregate base, then build hardwood or steel forms to the final grade. Rebar or welded wire mesh goes in, elevated on chairs so it ends up in the middle of the slab, not sitting on the dirt. If your plans call for a thickened edge or a thicker slab for heavier vehicles, this is where the difference is set. Inspection for grading and set-back, if the city requires one, usually happens right after forms are up.
Stage 3: Perimeter and access decisions (day 2)
This is where we flag anything that touches the driveway: a low utility box in the path, a gate post that needs to move, an expansion joint against the garage slab or abutting sidewalk. You’ll also pick finish, joint pattern and color at this stage so we can order or mix before the pour. Making that call now avoids a stall on pour day.
Stage 4: The pour and finish (day 3)
We pour in a single continuous placement where access allows, then screed, float, and finish. Standard broom finish is the practical default; a light salt finish or exposed aggregate costs more and needs an extra pass. Control joints get cut within the first 12 to 24 hours while the concrete is still green, which is the single most important step for controlling random cracking.
Stage 5: Cure and open to traffic (days 3 to 7)
We keep the slab moist-cured and covered against Brentwood’s dry heat and Delta wind, which will pull moisture out faster than a coastal pour would. Foot traffic is fine at about 24 hours; a car typically rolls on at day 5 to 7, and the heaviest vehicles wait until day 7 or later. You’ll get a plain schedule in writing before we leave.
If your driveway is part of a full Driveway & Pavers in Brentwood plan that also touches a walkway or apron, we sequence the flatwork around it so you’re not paying for mobilization twice.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make Before Any Concrete Is Poured
These are the decisions that actually change the number, your maintenance load and how the slab holds up. Honest trade-offs on each.
- Standard broom finish – the practical default. Best traction, cheapest, hides small imperfections. Doesn’t give you a decorative look.
- Exposed aggregate or salt finish – more texture, hides tire marks, holds up to Brentwood’s dust. Costs more, and weeds and grit settle in the texture over time.
- Stamped or colored concrete – a decorative option that mimics stone or pavers. It looks sharp on new build curb appeal, but it’s the most expensive flatwork finish and needs resealing every couple of years in this climate.
- Plain gray 4-inch slab vs thickened edge or 5- to 6-inch slab – a standard 4-inch pour handles passenger cars. If you park a heavy truck or RV, the thicker slab is worth the upcharge.
- Rebar vs wire mesh – both work when installed correctly; rebar costs more but resists cracking better on expansive clay. We’ll tell you which fits your site.
- Joint layout – control joints every 8 to 10 feet, plus isolation joints where the driveway meets the house or a fixed structure. Getting this right is what keeps cracks where you can’t see them.
- Drainage and slope – grading away from the house and toward the street, with a swale or channel drain where the driveway meets the garage. Non-negotiable for keeping water out.
If your project also includes a hardscape surround, we can pull Belgard or Tremron into the picture for a paver border or apron, but only where it earns its place next to the concrete. Our wider Driveway & Pavers work covers that side of things.
What Concrete Driveways & Concrete Work Costs in Brentwood, CA
Standard driveway installation in Brentwood runs $4,500 – $12,000. A full driveway replacement with demo, haul-off and new base lands at $5,000 – $14,000. Small flatwork like an added apron or a walkway run is typically a few hundred to a couple of thousand depending on square footage.

Four variables push a job toward the low or high end:
- Square footage and width – a 10-foot single apron is a small job. A 20-foot double with a widened turn-around pushes past the midpoint every time.
- Existing conditions – a clean pull of one old slab is straightforward. Hidden irrigation, old tree roots, or a failing sub-base get discovered at excavation and add a line item you’ll see before we continue.
- Base and reinforcement – thicker aggregate base, rebar versus mesh, and thicker slabs each add cost and each buy durability.
- Finish level – broom finish is the floor. Stamped or colored concrete pushes the price toward the high end.
- Drainage scope – a channel drain or a significant regrade with a swale is a line item on its own.
Our written estimate is line-itemed: demo, haul-off, base, forms, reinforcement, pour, finish, joints, cure and cleanup. What we don’t quote unless you ask: landscape repair beyond the pour line, moving a utility line, or replacing the driveway approach apron if the city owns that section. Upfront pricing, no surprises – the number you see is the number you pay, with 0% financing for 18 months and $1,000 off projects over $10,000 available.
See the difference
Before
After
Before
After
Before
AfterWhat Brentwood Homes Specifically Do to This Job
Brentwood’s housing stock is overwhelmingly new – big tracts of 1990s-to-2020s Mediterranean and Spanish-style stucco homes alongside custom ranchettes on multi-acre lots, with a tiny pocket of older downtown bungalows. That matters for concrete because a modern build almost always means a young driveway that fails early, not a 60-year-old one that needs a full overhaul. The usual failure we see in the 94513 ZIP codes is not structural: it’s a driveway that was poured too thin over a weak base and now has spider cracking or a slab that’s settled at the garage apron. Concrete work here is more often a replacement than a repair.
The expansive clay and former-orchard soil under much of Brentwood is the real driver. When that clay shrinks in a dry summer, the slab edges can lift or drop and open joints. We see it most on newer streets where the lot was graded over orchard land and the base wasn’t compacted to spec. If your property sits on an old orchard parcel, excavation can also turn up buried irrigation pipe, furrow lines and residual pesticide that need proper handling before we pour – we test and dispose as part of the job. Permits, grading and drainage requirements are enforced by the city of Brentwood, and HOA rules on finish color and driveway width apply in many of the larger tracts, so we check both before forms go up. We work across Brentwood and the surrounding communities of Oakley, Discovery Bay and Antioch. Homeowners often pair new flatwork with a Garage Conversion ADU in Brentwood so the apron and approach match the new floor level, or with a New Detached ADU in Brentwood where a second driveway is part of the plan.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Brentwood
Most driveways take 3 to 5 working days from demo to final cleanup, plus a 5- to 7-day cure before you park on them. Summer heat over 100°F in Brentwood can add a day to cure because the slab needs more careful moisture management. Call (888) 419-3650 to get a schedule for your specific site.
Often yes – the city of Brentwood reviews driveway work that alters grade, drainage or the approach apron, and some HOA tracts require design review for finish and width. We handle the permit and inspection coordination as part of the job. Call (888) 419-3650 and we’ll tell you what your address needs.
Sometimes. If the sprinkler heads, planter edges and irrigation lines sit outside the pour line, we can keep them intact. If they’re inside the driveway footprint, they have to be capped and reset, which is a line item. Call (888) 419-3650 for a walk-through estimate.
Standard driveway installation runs $4,500 – $12,000; a full replacement including demo and haul-off sits at $5,000 – $14,000. The final number depends on square footage, base conditions, reinforcement and finish. Call (888) 419-3650 for an exact quote – estimates are free.
All our work is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s written, not verbal. Call (888) 419-3650 to see the promise in your written estimate.
Ready for a Real Number on Your Brentwood Driveway?
A free on-site estimate for concrete driveways and concrete work in Brentwood starts with a walk of your property: we check existing slab condition, base, slope, drainage and access, and hand you a written line-item quote before you commit to anything. No pressure, no surprises. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and every call is answered by a live person 24/7. Call (888) 419-3650 to schedule your free estimate.
Written by the team at Groundwork Construction Co..