Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Brentwood, CA: What It Involves and What It Costs
A chain link fence in Brentwood runs $3,500 to $9,000 for a typical residential perimeter, and most jobs wrap in one to three days once the layout and permits are settled. The work is fast, the price swings come from length, height, gate count, and site conditions rather than the mesh itself. Call (888) 419-3650 and we’ll walk your property line, measure it, and put a written number in your hands before any post goes in the ground.
How a Chain Link Fence Goes In, Stage by Stage
Day 1: Layout and utility marking. We walk the property line with you and confirm corners, gate positions, and height changes. Before any digging, 811 utility locating gets called in and the marks get read against your layout. Brentwood lots on former orchard land regularly have old irrigation lines running through the fence path, and those don’t always show up clean. If a line conflicts, we reroute the fence line rather than dig through it. You decide gate swing direction and hinge side at this stage; that’s the choice most homeowners leave too late.

Day 1-2: Demolition and post setting. Old fence comes out, posts get set in concrete. Terminal posts (corners, ends, gate posts) go deeper and wider than line posts because they carry the tension of the whole run. We set posts plumb with a level at each one, not eyeballed, and the concrete needs a cure window before tensioning. On expansive clay, the hole depth and concrete collar matter more than anything else in the build, so this stage doesn’t get rushed.
Day 2: Framing and tensioning. Top rail, brace bands, and tension bands go on, then the mesh gets stretched with a come-along and tied off at every post. A chain link fence that looks fine but sags after a season was usually tensioned wrong, not built from bad material. We check the fabric for drum-tight tension along the entire run before calling it done.
Day 2-3: Gates and hardware. Walk gates and drive gates get hung, latches aligned, and self-closing or self-latching hardware installed where you want it. Gate posts are the most common failure point on any chain link fence, so we confirm they’re set and cured before hanging weight on them. You’ll test every gate yourself before we leave.
Final walkthrough. We walk the line together, check post alignment, tension, gate operation, and clean up the site. Anything that isn’t right gets corrected on the spot. Our technicians bring up to 12 years of experience to this, and every job is backed by our 730-Day Done Right Promise. If it’s not done right, we make it right, in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Chain Link Fence
The mesh is the least interesting decision. Here’s what actually changes the look, the cost, and how long the fence holds up.
- Galvanized vs. vinyl-coated mesh: Galvanized is the budget standard and holds up fine in Brentwood’s dry climate. Vinyl-coated (usually black or green) costs 10-20% more but reads much less like a chain link fence from the street. On a custom home with any curb-appeal concern, the coated version is usually worth it.
- Height: 4-foot is the residential norm for a boundary line. 5-foot and 6-foot runs cost more per linear foot and may pull in HOA review or a permit trigger depending on the subdivision.
- Gauge of wire: 11.5-gauge is the standard residential fabric. 9-gauge is heavier and harder to dent, which matters on a lot with kids, dogs, or balls flying into it.
- Post schedule: Line posts every 10 feet is standard. Pulling them to 8 feet stiffens the fence noticeably on long, windy runs. Brentwood’s Delta winds punish a fence built with posts set too far apart.
- Top rail and tension wire: A top rail gives the fence its straight line and looks cleaner. A bottom tension wire is cheaper than a bottom rail but the fabric can lift at the base.
- Gates: Walk gates are straightforward. Drive gates 12 feet and wider need heavier posts and a proper frame, and that’s the single biggest line-item jump on most chain link jobs.
Brand-name hardscape products like Belgard and Tremron come into play when the fence pairs with a patio or paver border, but the fence hardware itself is specified by gauge and coating, not by a brand label on the box.
What Chain Link Fence Costs in Brentwood, CA
Expect $3,500 to $9,000 for a residential chain link fence in Brentwood. That’s a real range, not a hedge. Here’s what pushes a job toward either end.
| Line item | Typical range |
|---|---|
| Standard 4-ft galvanized, 150-200 linear ft | $3,500 – $5,500 |
| 6-ft vinyl-coated with top rail | $5,500 – $9,000 |
| Walk gate (installed) | $300 – $700 |
| Drive gate, 12 ft+ (installed) | $900 – $2,000 |
| Removal of existing fence | $400 – $1,200 |
| Permit (where required) | varies by scope |
The four variables that move the number most: linear footage (obviously), height and coating, gate count and width, and site condition. Rocky ground, tree roots, buried irrigation, or a property line that runs through a slope all add labor. A written estimate from us lists posts, mesh, rails, gates, concrete, and cleanup as separate lines, so you can see exactly where the money is going. What’s typically not included: landscape repair beyond the fence line, retaining walls, and grading. No-hassle upfront pricing is the rule here, the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Brentwood Homes Specifically Do to This Job
Brentwood’s housing stock is overwhelmingly new, mostly 1990s through 2020s stucco homes alongside custom ranchettes on multi-acre lots, and that shapes chain link work here in ways it doesn’t in older East Bay cities. On the newer tract homes, fences mark property lines between neighbors and the post spacing has to line up with existing shared-line corners that were set when the subdivision was graded. On the multi-acre lots out toward the edges of town, chain link runs are long, often 500 feet or more, and wind exposure is the real design driver, not aesthetics.

The soil is the other story. Brentwood sits on expansive clay that shrinks and swells with the seasons, and a hot inland summer with highs over 100°F works that clay hard. Posts set too shallow will heave and lean within a few years. We set deeper and use a wider concrete collar than a mild-climate fence schedule calls for. And on former orchard land, digging often turns up old furrow lines and buried irrigation pipe that needs to be routed around or removed before posts go in.
Permits are handled through Contra Costa County and the City of Brentwood, and requirements track fence height and whether it’s on a property line. HOAs in the newer subdivisions frequently have their own rules on fence height, color, and even whether chain link is allowed facing the street. We check that before the layout is finalized, not after. If your project is part of a full Fence Installation in Brentwood plan, we’ll coordinate the chain link runs with the rest of it. Homeowners often pair this with Concrete Driveways & Concrete Work in Brentwood when a new gate needs a clean approach, and sometimes with Asphalt Driveways & Resurfacing in Brentwood if the drive is getting redone in the same project. Our Fence Installation service covers every material, and you can see everything we handle across Brentwood on our service-area page.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chain Link Fence in Brentwood
Most residential chain link fence jobs in Brentwood take one to three days, with the concrete cure for post setting the main pause in the sequence. Larger multi-acre runs and jobs with multiple drive gates can stretch to four or five days. The longest delay is usually permit review or HOA approval, not the build itself. Call (888) 419-3650 to get a realistic timeline for your specific lot, estimates are free.
A permit is often required in Brentwood depending on fence height and whether it sits on a property line, and HOA approval may be required separately in the newer subdivisions. We handle the permitting process as part of the job and confirm what applies to your address before layout is finalized. Call (888) 419-3650 and we’ll tell you what your property needs, free estimates, no obligation.
Yes, if it’s built for the conditions. Brentwood’s hot, dry summers and persistent Delta winds are hard on posts set too shallow or spaced too far apart, and expansive clay soil makes that worse. We set posts deeper with a wider concrete collar and tighten post spacing on long, exposed runs. Call (888) 419-3650 for an on-site assessment, estimates are free.
Chain link fence in Brentwood runs $3,500 to $9,000 for most residential jobs, with gates, height, and site conditions as the main drivers. Our written quote is the number you pay, no change orders unless the scope actually changes and you approve it in writing. Call (888) 419-3650 for an exact quote, estimates are free.
Every chain link fence we install is covered by our 730-Day Done Right Promise. If something isn’t right, we come back and make it right, that’s the whole point of a two-year workmanship guarantee. Call (888) 419-3650 to schedule your free on-site estimate.
Get a Free Chain Link Fence Estimate in Brentwood
Call (888) 419-3650 and a live person answers, day or night, no voicemail. We’ll ask about your property line length, gate needs, and any HOA or permit questions, then schedule a free on-site estimate where we measure, walk the soil conditions, and hand you a written line-item price. No pressure, no surprises, just a number you can plan around.
Written by the team at Groundwork Construction Co.