Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Alamo: What to Expect
Concrete driveways & concrete work in Alamo typically run $4,500 – $12,000 for a full driveway installation, and most jobs take four to seven days from demolition to the first drive-on. A replacement carries similar numbers, usually $5,000 – $14,000 once you account for hauling out the old slab. Call (888) 419-3650 for a free on-site estimate and a written line-item quote before anything gets demoed.

How the Work Actually Runs, Start to Finish
Concrete work is a schedule game. Pour too early and the slab cracks. Pour too late and the crew is waiting on a truck. Here’s the sequence we follow on Alamo jobs.
Stage 1: Site walk and layout (day 1)
We measure the run, check the slope, and mark the edges with stakes and string. You decide the driveway width (12-foot minimum for a single car, 16 – 20 feet for a comfortable two-car approach) and whether you’re keeping the current apron location. On hillside lots off Stone Valley Road, this is also where we flag whether the grade calls for stepped pours or a retaining edge.
Stage 2: Demo and haul-out (days 1 – 2)
An old slab comes up with a jackhammer and skid-steer, and the debris leaves in dumpsters. Expect 20 – 40 tons of concrete removed on a standard two-car drive. If there’s existing asphalt, it’s cheaper to pull but adds hauling cost. We protect landscaping edges with plywood and mark irrigation lines before the first strike.
Stage 3: Base prep and grading (days 2 – 3)
This is the stage homeowners underestimate. We excavate 6 – 8 inches, compact the native soil, then lay 4 – 6 inches of Class 2 base rock in lifts. A driveway needs a slope of about 2% away from the garage so water doesn’t pool at the door. You’ll approve the final grade before rebar goes down.
Stage 4: Forming, rebar, and pour (days 3 – 4)
Forms go up, #4 rebar goes in on a 24-inch grid (we always use rebar, not mesh, on driveways), and we pour in one continuous pass. Control joints get cut within 12 – 24 hours to control where cracks happen. You choose the finish before the pour: broom, salt-and-pepper exposed aggregate, or a light stamp.
Stage 5: Cure and seal (days 4 – 7)
Concrete cures, it doesn’t just dry. You’ll keep vehicles off it for 7 days and heavy loads off for 10. We come back at day 28 for a cure-and-seal coat that protects against the San Ramon Valley’s UV and winter rain. That’s the last step, and the one most crews skip.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Shape a Concrete Driveway in Alamo
- Plain broom finish: The most affordable option at the low end of the range. Grippy, low-maintenance, hides tire marks. Best for long rural driveways where curb appeal is secondary.
- Exposed aggregate: Adds roughly 15 – 25% to the base cost. Shows texture, wears well, and looks at home on estate lots. Pick the aggregate color carefully; it’s baked in for 30 years.
- Light stamp or stamped borders: A modest premium for a custom look. We keep it to borders and aprons rather than full-drive stamping, which costs more and can spall on freeze-thaw edges.
- 4-inch vs 5 – 6-inch slab: Standard residential is 4 inches, but any driveway that sees an RV, boat trailer, or heavy delivery truck should be 5 – 6 inches with thicker rebar. Alamo properties often have exactly that traffic.
- Fiber mesh vs rebar: Fiber reduces surface cracking; rebar carries structural load. On a driveway, you want rebar. Fiber alone is for patios and walkways.
If the concrete is part of a full hardscape plan, our Driveway & Pavers in Alamo page covers the wider scope, including how concrete and pavers coordinate at the apron and walkway.
What Concrete Driveways & Concrete Work Costs in Alamo, CA
Here are the line-item price ranges we quote in this market:

| Item | Typical Range |
|---|---|
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement (demo + pour) | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
Five factors push a job to the low or high end:
- Square footage: A standard two-car drive is 400 – 600 sq ft. An estate approach on a half-acre parcel can top 1,500 sq ft, tripling material and labor.
- Access and slope: Hillside lots off Stone Valley Road or near the Alamo ridge often need retaining edges or stepped pours. Flat Danville-style lots don’t.
- Existing condition: Removing 4 inches of sound concrete is routine. Removing an old slab with rebar and root damage underneath isn’t.
- Finish grade: Broom is at the bottom, exposed aggregate 15 – 25% more, stamped significantly higher.
- Permit and geotech: A structural driveway on a graded hillside may trigger geotechnical review, adding $800 – $2,500.
Every written estimate itemizes demo, haul-out, base rock, rebar, pour, joints, and seal. What it doesn’t include: landscape restoration outside the work zone, drainage corrections beyond the driveway footprint, or county permit fees, which we list separately so you see them before you sign. Pricing is upfront, and the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Alamo’s Lots and County Rules Do to a Concrete Job
Alamo is unincorporated Contra Costa County, which changes the paperwork. There’s no city hall to walk into. Permits go through the county building department, and any concrete work near a slope or structural retaining wall may pull in the county fire department as well. On flat valley-lot jobs that’s a few extra weeks; on hillside parcels it can trigger geotechnical and slope-stability review that a Walnut Creek or Pleasant Hill project would never see. The second factor is scale. Alamo’s custom ranch and Mediterranean estates on half-acre to multi-acre parcels often have 800- to 1,500-foot private driveways and detached outbuildings, so what looks like a “driveway job” is sometimes half an acre of concrete, drainage, and access work. Clay-heavy hillside soils and the valley’s wet winters mean we build in positive drainage rather than treat it as an afterthought. The ZIP code we work most is 94507, and while the entire Alamo service area is covered, the hillside streets see the most structural drainage work.
Serving Alamo, CA – Our Local Coverage Area
We serve Alamo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Alamo
Four to seven working days from demo to first drive-on, plus a 7-day no-vehicle restriction and a 28-day cure before the final seal. Large estate driveways over 1,000 sq ft stretch to 10 – 14 days. Call (888) 419-3650 to get a schedule based on your specific lot.
Often yes. Any concrete work tied to a retaining wall, hillside slope, or structural element requires a Contra Costa County permit, and hillside lots frequently trigger geotechnical review. Simple flat-lot driveway replacement usually doesn’t. We pull permits as part of the job and walk you through inspection scheduling.
Sometimes, with a concrete overlay, but only if the existing slab is structurally sound and there’s room for the added thickness under the garage door. On Alamo estate driveways we typically recommend full replacement. Overlays are cheaper today and crack sooner; replacement is the honest answer.
$4,500 – $12,000 for installation and $5,000 – $14,000 for a full replacement, depending on square footage, slope, and finish. Sealing alone runs $250 – $700. Call (888) 419-3650 for an exact quote; estimates are free and include a written line-item breakdown.
All our work is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. We also recommend a reseal every 3 – 5 years to protect the surface against valley sun and winter rain.
Get a Free Concrete Estimate in Alamo
Call (888) 419-3650 to schedule a free on-site walk of your driveway. You’ll get a written line-item estimate, a clear timeline, and straight answers on permits and drainage before any concrete is ordered. A live person answers, day or night. And if your project grows into something bigger, homeowners often pair this with a Garage Conversion ADU in Alamo or a New Detached ADU in Alamo, both of which we handle from foundation to finish line under our Driveway & Pavers service umbrella and the same 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.