Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Danville: What It Actually Takes
Most concrete driveway installations in Danville run $4,500 – $12,000, and a full pour usually takes 3 – 5 working days from demo to the day you can park on it. Concrete work here means flatwork: driveways, aprons, approach aprons at the street, walkway slabs, pads, and the reinforced slabs that sit under a new New Detached ADU in Danville. Call (888) 419-3650 and we’ll walk your lot, measure the approach, and give you a written line-item number.

How the Work Actually Runs, Start to Finish
Concrete is a sequence, not a single pour day. Here’s the order we follow on a Danville job, and what you’ll be deciding at each step.
Stage 1: Site visit and layout (day 1). We measure the existing slab or driveway, check the slope toward the street and toward the house, and confirm where the expansion joints will land. You decide the width at the apron, whether you’re widening to a double, and whether the finished surface gets a broom finish, exposed aggregate, or a saw-cut pattern.
Stage 2: Demolition and haul-off (day 1 – 2). A 4-inch residential slab breaks out fast; a 6-inch reinforced slab with a thick base takes longer. We haul the old concrete off-site, which is a real line item because disposal is priced by the ton. You don’t have to decide anything here except where the truck can stage.
Stage 3: Base prep and grading (day 2). This is the stage nobody sees and the one that decides whether the pour cracks in three years. We excavate 4 – 6 inches below finished grade, compact class 2 aggregate base in lifts, and re-check slope. If the subgrade is clay-heavy, which parts of the Danville flats are, we bring in additional base rather than pouring on native soil. You’ll approve the final grade before we set forms.
Stage 4: Forms, rebar or mesh, and inspection (day 3). We set forms, tie #3 or #4 rebar on 16 – 24 inch centers depending on load (a driveway carrying an SUV and a work truck is not the same as a walkway), and drop in expansion joint material where the slab meets the garage, the street apron, and any fixed structure. If your municipality requires a right-of-way permit for the approach apron, this is the stage where an inspector signs off. You’ll review the rebar layout with us before the pour.
Stage 5: Pour, finish, and cure (day 4 – 5, then 7 days of staying off). Pour day is early morning. We screed, float, finish, and cut control joints within 24 hours. You need to keep vehicles off the slab for 7 days and heavy loads off for 28. Plan to park on the street during that window.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
- Plain broom-finish concrete. The standard, and the most cost-effective. $4,500 – $9,000 for a typical two-car Danville driveway. Nonskid, easy to shovel, and the honest pick if you’re planning to sell in the next five years.
- Exposed aggregate. Adds roughly 15 – 25% to the concrete line. It shows the aggregate in the mix, so finish quality depends entirely on the crew. It’s forgiving of minor surface wear, which matters under Danville’s summer sun.
- Saw-cut or stamped pattern. Decorative scoring or stamping runs higher per square foot because of labor. Talk to us about coordinating it with a Driveway & Pavers border if you want a hardscape edge.
- Slab thickness. 4 inches is standard for cars. Go to 5 or 6 inches if a boat, RV, or heavy truck parks on it. The base prep is the bigger driver of durability than the thickness, but both matter.
- Color. Integral color or a surface hardener adds cost per yard but hides stains. Belgard and Techo-Bloc paver edges pair well with pigmented concrete aprons if you’re blending hardscape styles.
What Concrete Driveways & Concrete Work Costs in Danville, CA
The range is $4,500 – $12,000 for a standard concrete driveway installation. Here’s what moves a job toward the low or high end of that number.
- Square footage. A single-car approach sits at the bottom; a wide double with a turnaround pad at the top.
- Existing slab condition. A clean single pour removes fast; a cracked, reinforced, or multi-layer slab adds demo labor and disposal tonnage.
- Base prep. Poor drainage or clay-heavy subgrade means more excavation and more imported base.
- City permitting. An approach apron over the public right-of-way usually requires a permit and inspection, which adds both a fee line and a scheduling step.
- Finish choice. Broom is baseline; exposed aggregate, stamped pattern, and integral color all sit above it.
A written estimate from us itemizes demo, haul-off, base, rebar, forms, pour, finish, and permit fees. It does not include: landscaping repair around the slab edges, drainage improvements (French drains, area drains), or moving irrigation lines that cross the footprint. Those get quoted separately if you want them.

See the difference
Before
After
Before
After
Before
AfterWhat Danville Homes Specifically Do to This Job
Almost nothing built here in the last several decades is a fresh tract pour. Danville is a built-out, high-value Tri-Valley suburb where nearly all concrete work replaces flatwork on lots that were finished decades ago, on homes people intend to keep. That changes the job in three ways. First, drainage: an existing lot has an existing grade, and we’re matching the new slab to it rather than designing from scratch. If the driveway drains toward the foundation, that’s a problem we fix with grading and a channel drain, not a slope we can ignore. Second, mature landscaping: tree roots, established irrigation, and existing hardscape edges mean we’re surgically removing and replacing, not clearing a site. Third, the split between the flat 94526 core and the hillside 94506 side above Blackhawk and Tassajara. The flats are dominated by 1960s-1990s California ranch homes with attached garages and modest approach aprons. The hillside homes are on steeper grade with longer approaches, tighter turnarounds, and fire-zone considerations that affect what we can stage where. Summer sun in the inland Tri-Valley is punishing, and concrete pour timing reflects that: we pour early, we cure properly, and we do not pour into a sun-baked slab that will crack before it sets.
Serving Danville, CA – Our Local Coverage Area
We serve Danville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Danville
Most jobs are 3 – 5 working days from demo to finish, then 7 days off the slab and 28 days before heavy loads. Scheduling can extend if the approach apron needs a permit and a city inspection. Call (888) 419-3650 for a timeline specific to your lot.
An interior driveway often doesn’t require a permit, but any work that touches the public right-of-way approach apron usually does. We pull the permit and coordinate the inspection as part of the job. Every estimate we write spells out exactly which permits are included.
Usually yes. The two things that force a change are irrigation lines crossing the slab and downspouts or gas lines running under the existing driveway. We locate them in the site visit and tell you before demo whether they need to be relocated.
$4,500 – $12,000 for a standard two-car installation, with the higher end reflecting a wider slab, heavier base prep, or a premium finish. Call (888) 419-3650 for a written line-item number. Estimates are free.
Every concrete job is covered by our 730-Day Done Right Promise. If something isn’t right, we make it right. We put that in writing on the estimate, alongside the finish spec and the base spec, so there’s no ambiguity later.
If you’re already planning a full exteriors and hardscape scope, it’s worth looking at Driveway & Pavers in Danville as well; many homeowners pair a new concrete driveway with a matching patio or walkway. And if you’re converting a garage or building a detached unit, the flatwork for that ties directly into Garage Conversion ADU in Danville. We cover the full Danville footprint, including the hillside addresses and the flats.
Get a Free On-Site Estimate
We’ll come out to your Danville lot, measure the approach, look at the existing base, and give you a written itemized estimate with the finish spec, the permit line, and the base detail laid out. Free estimate, no pressure. Call (888) 419-3650 and a live person will get you on the schedule.
Written by the team at Groundwork Construction Co. of Antioch.