Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Livermore, CA
A new concrete driveway in Livermore typically runs $4,500 – $12,000, and most full replacements are finished in 3 – 5 days from demo to the day you can park on it. If you’re only resurfacing or repairing a section, you’re usually looking at a fraction of that and a shorter schedule. Concrete work here is different from most of the East Bay because of what’s under the slab and what the city wants to see before we pour. Call (888) 419-3650 to set up a free on-site estimate and we’ll walk the driveway with you.

How concrete driveway work actually runs, day by day
Most contractors hand you a start date and a rough finish window. Here’s what actually happens, so you know what to expect and when you have to make a decision.
- Day 1 – walkthrough and layout. We mark the edges, confirm the slope and drainage direction, and check where downspouts, irrigation lines and gas or electrical runs cross the pour zone. This is where you decide the finish (broom, exposed aggregate, scored joint pattern) and whether the driveway widens or narrows. If any utility needs to move, that’s decided now, not mid-pour. We also flag any older existing slab or footing that needs to come out.
- Day 1 or 2 – demolition. The old slab, if there is one, gets broken and hauled. On the older downtown Livermore properties this is often the slow part, because a 1950s slab may have a thickened edge or old footing tied in that doesn’t come up as cleanly as a modern pour. Half a day to a full day, depending on access.
- Day 2 – base prep and grading. We excavate, grade, and compact the sub-base (usually 4 – 6 inches of class 2 base over compacted native soil). On Livermore’s clay-heavy ground, that base and the compaction matter more than anything else. This is the stage that prevents the cracking you see on so many driveways around town. We also set form boards and confirm the slope away from the garage so water doesn’t pool at the door.
- Day 2 or 3 – inspection if required. For structural or wider pours, the city may want to see forms and base before concrete goes in. We handle pulling the permit and scheduling that inspection. You don’t have to be home.
- Day 3 – pour and finish. Concrete arrives, gets placed, screeded, floated and finished to your chosen texture. Control joints get cut or tooled to direct cracking where we want it. Then it cures. We keep traffic off it for the first 24 – 48 hours and keep vehicles off for roughly 7 days, longer in cool weather.
You’re involved at three points: finish selection, layout confirmation, and final walkthrough. Everything in between is ours to manage. If the driveway is part of a bigger Driveway & Pavers in Livermore project that includes a front walk or apron, we sequence it so the concrete cures before anything gets built over it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that actually change the look and the bill
Concrete is one material with a lot of variables. Here’s what you’ll be deciding between, with the honest trade-offs.
- Standard broom finish. The default, the most cost-effective, and the most slip-resistant for Livermore’s wet winters. Trade-off: it looks like a driveway, not a design feature. Ages honestly and hides minor stains better than smooth finishes.
- Exposed aggregate. The top layer of cement is washed away to reveal the stone underneath. Good grip, hides tire marks, holds up to our hot dry summers. Costs a bit more, and the finish is harder to repair invisibly if a section ever fails.
- Scored or saw-cut joint patterns. Decorative joint lines that break up a large pour visually. Low added cost, and they serve a structural purpose by controlling where cracks land. This is the version most homeowners actually want.
- Colored or stamped overlays. If you want a paver look without pavers, a stamped or colored concrete finish gets you there. Trade-off: higher cost, and stamping requires more labor and experience to look right. If paver aesthetics are the goal, a real paver driveway with Belgard or Techo-Bloc is worth pricing side by side.
- Thickness. 4 inches is standard for a residential driveway; 5 – 6 inches is worth it where a heavier vehicle like an RV or work truck parks, or on clay that moves.
- Rebar vs. mesh. Rebar adds cost but adds real tensile strength. On Livermore’s clay and near fault-zone ground movement, we lean toward rebar on anything wider than a single-car drive.
You make these calls at the estimate, not after the truck shows up. That’s how you avoid the “we’ll figure it out on-site” surprise.
What concrete driveways & concrete work costs in Livermore, CA
Here’s the line-item range for concrete work in Livermore, pulled from how we actually price these jobs.
| Scope | Typical range |
|---|---|
| Concrete driveway installation (new or replacement) | $4,500 – $12,000 |
| Full driveway replacement (demo included) | $5,000 – $14,000 |
| Paver driveway, for comparison | $7,000 – $18,000 |
| Driveway sealing (existing concrete) | $250 – $700 |
What moves a job to the high end: square footage and thickness, of course, but also four things people don’t expect. Access matters. A driveway a concrete truck can’t back into means a pump or wheelbarrow haul, and that adds labor. Old slab removal runs higher on the older downtown stock with thickened edges and old footings. Base prep and grading on poorly drained or clay-heavy ground can add a full day and extra base material. And utility relocations (irrigation, gas, electrical running under the pour zone) are a real line item when they have to move.
Every written estimate breaks out demolition, base, formwork, reinforcement, pour, finish and permit. What typically isn’t included unless we scope it in: utility relocation, drainage correction beyond the pour zone, and any landscaping repair. Call (888) 419-3650 for an exact quote, free on site.

See the difference
Before
After
Before
After
Before
AfterWhy Livermore ground is hard on concrete
Livermore sits right on the Greenville Fault, in one of the more seismically active stretches of the East Bay, and the clay-heavy soil here moves with the seasons. Hot, dry summers crack slabs; wet winters swell the clay and push foundations and slabs around. On top of that, the downtown 94550 stock is mostly early-1900s to 1950s single-story ranches and Victorians on raised foundations, many with unreinforced brick chimneys and cripple walls that predate seismic code. The 94551 tract homes from the 1970s through the 1990s bring their own quirks: original slabs that have had decades of settling and drainage issues. What that means for a concrete driveway is that base prep and reinforcement aren’t optional here. A thin pour on uncompacted clay will show you cracks within a couple of winters. That’s also why we check existing foundation and drainage before we pour, and why older downtown properties sometimes surface a retrofit requirement while we’re on site. We cover all of these ZIPs: 94550 and 94551, right across Livermore.
Serving Livermore, CA – Our Local Coverage Area
We serve Livermore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Concrete Driveways & Concrete Work in Livermore
Most residential concrete driveways take 3 – 5 days from demo to the pour, with vehicle traffic off the slab for about 7 days afterward. A repair or partial pour can be a single day. If the job includes a permit and inspection, add a short wait for the inspection window. Call (888) 419-3650 to schedule your free estimate and we can give you a realistic date range.
It depends on the scope. A like-for-like replacement often doesn’t require a permit; a wider drive, new approach, structural changes, or a pour near a property line usually does. We check the Livermore requirements against your specific address and pull what’s needed, and you don’t have to manage that yourself. Call (888) 419-3650 for a free estimate and we’ll walk you through it.
No. With upfront pricing, the number in your written estimate is the number you pay. If we open things up and find a utility line under the pour zone we didn’t know about, we stop and talk to you before doing anything that would change the scope. Call (888) 419-3650 for a line-item estimate with no surprises.
Sometimes, yes. If the existing base is intact and only a section has failed, we can saw-cut and replace that section, or do an overlay where the slab is sound. But on Livermore’s clay, a failing slab usually means the base underneath is failing too, and a patch will crack again in a year or two. We tell you honestly which one applies on-site. Call (888) 419-3650 for a free estimate.
Every Groundwork project is backed by the 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship for two years. Call (888) 419-3650 for details before you sign anything.
If the driveway is the start of something bigger, homeowners often pair this with a Garage Conversion ADU in Livermore or a New Detached ADU in Livermore. Either way, driving on the new slab is a great way to confirm the grade and drainage before the rest of the project starts. And if you’d like the wider picture on patios, walkways and other hardscape, our Driveway & Pavers service covers it.
Ready to price your concrete driveway in Livermore?
We’ll come out, walk the driveway, measure, check the base and the drainage, and hand you a written line-item estimate. No pressure, no vague numbers. Call (888) 419-3650 to schedule your free estimate for concrete driveways & concrete work in Livermore, or to ask a question about your address. Live person on the phone, 24 hours a day.
Written by the team at Groundwork Construction Co.