Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Alamo: What the Job Actually Involves
Custom & geometric windows in Alamo typically run $8,000 – $25,000 for a whole-house package of shaped, arched or radius units, or $3,500 – $9,000 for a single feature wall, and most projects take four to eight weeks from template to final trim. The job is part measurement, part fabrication and part surgical framing: geometric units are built to your rough opening, so the wall has to be opened, checked and rebuilt square before anything arrives. Call (888) 419-3650 and we’ll walk the house with you and put real numbers on paper.

How We Sequence a Custom & Geometric Window Project
Shaped windows are unforgiving. A half-inch of slop in a rectangular unit is a shim and some caulk. On a radius or trapezoid, it’s a visible gap and a leak. Here’s the order we work in.
1. Field measurement and templating (day 1, 2 – 3 hours)
We measure every opening to the sixteenth, photograph the wall cavity where possible, and note the framing condition behind the drywall or stucco. For arched or radius units we build a physical template of the opening rather than trusting a drawing. You decide the wood or frame material at this stage, because the template dimensions get set against it.
2. Manufacturer order and shop drawing approval (week 1 – 2)
Custom units go to the fabricator as a shop drawing you sign off on before anything is cut. That single approval step is where most geometric window headaches start or stop, so we sit with you and read the elevation drawing line by line. You confirm grille pattern, glass package, finish color and whether the unit is fixed or operable.
3. Permit and pre-install preparation (week 2 – 4)
On Alamo’s unincorporated lots, that paperwork goes through Contra Costa County rather than a city building counter, which adds time. While it works through review, we order material and schedule the interior protection and dust control.
4. Demolition, framing and setting (2 – 4 days on site)
The old unit comes out, the opening gets reframed square and level, and any dry rot or pest damage in the surrounding studs gets replaced before the new window goes in. Geometric units are set and shimmed in stages, checked against a level in both planes, then flashed. You’ll see the wall open at this point. It’s the messiest day and the one that matters most.
5. Flashing, insulation, trim and final inspection (3 – 5 days)
We seal the perimeter, insulate the cavity, install interior and exterior trim, and get the county inspection signed off. Glass and finish touch-ups come last. You decide the trim profile on day one and the finish color before order, so the back end of the job is execution, not deliberation.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
- Wood-clad (Andersen or Marvin-class): the honest choice for a custom Alamo estate. Warm interior, low maintenance outside, and it accepts the odd shapes that geometric work demands. Higher cost, but it’s what most arched and radius units are built around.
- Vinyl with custom radii: the budget path. Vinyl can be bent and fabricated in curves, but sightlines are thicker and the profile is limited, so a radius looks heavier. Fine on a side elevation, less so on a front facade.
- Aluminum-clad: crisp, narrow frames and strong performance in San Ramon Valley heat, but a cooler look that suits modern and Mediterranean homes better than ranch styles.
- Glass package: fixed geometric units are usually the biggest glass area on the wall, so low-E coating and tempered glass where the county requires it are not optional upgrades. Expect the glass spec to add a real share of the total.
- Grid and finish patterns: divided lites, simulated divided lites or a clean single pane. This choice changes the look more than anything else, and it’s free to decide before order and expensive after.
What Custom & Geometric Windows Cost in Alamo, CA
Plan on $8,000 – $25,000 for a full geometric window package, or $3,500 – $9,000 for one feature unit with trim and perimeter work. Five things push a project toward the top of that band:
- Unit count and shape complexity. A single half-round is one price. A run of trapezoids over a vaulted great room is another.
- Framing condition. Opening a wall on a 1970s custom ranch often turns up dry rot, poor original framing or a header that needs replacing.
- Material grade. Wood-clad sits at the top, vinyl at the bottom, and the gap is real.
- Glass spec. Tempered, low-E, and any tinting or pattern work add up.
- Permit scope. A like-for-like swap is a lighter review than new openings in a load-bearing wall.
A written estimate covers the units, framing, flashing, insulation, trim, glass and the inspection. It typically does not cover interior paint, exterior stucco patching beyond the immediate opening, or structural repair found once the wall is open. We flag those as line items before we start rather than as surprise change orders later. Upfront pricing, no surprises. Call (888) 419-3650 for a written quote.

See the difference
Before
After
Before
After
Before
AfterWhat Alamo Homes Specifically Do to This Job
Alamo is an unincorporated, semi-rural valley of multi-acre estate lots in Contra Costa County, and that single fact changes how custom windows get permitted here. There’s no city hall to walk into. Your project goes through Contra Costa County’s building and fire departments, and on hillside lots off Stone Valley Road a geotechnical or slope-stability review can get added to the pile. We plan permit time into the schedule for exactly that reason, because a flat-lot project in neighboring Danville wouldn’t see it.
The housing stock matches the terrain. Alamo’s custom ranch and Mediterranean estates were largely built from the 1950s through the 2000s on half-acre to several-acre parcels, often with long private driveways and detached guest structures. What that means for us: vaulted great-room walls, oversized openings, and original frames that have been quietly aging through decades of hot, dry summers and seasonal Diablo-wind exposure. Ember-resistant venting and noncombustible exterior detailing come up repeatedly on these homes, and geometric windows on a west-facing wall are a real solar exposure decision, not just a style choice.
Our technicians have up to 12 years of experience with shaped and custom units across Alamo. When the scope broadens, this work is usually part of a full Windows & Doors in Alamo project, and homeowners often pair this with Concrete Driveways & Concrete Work in Alamo when access or drainage is part of the plan.
Serving Alamo, CA – Our Local Coverage Area
We serve Alamo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Alamo
Expect four to eight weeks from signed drawing to finished trim. Fabrication is the long pole, at three to five weeks for shaped units, and the on-site work is two to four days for demolition and setting plus three to five days for trim and inspection. Country permitting can add time on top. Call (888) 419-3650 for a schedule built around your house.
Yes. In Alamo, window work is permitted through Contra Costa County rather than a city building department, and opening a load-bearing wall for a new shaped unit triggers a review. We handle the application and the final inspection as part of the job. Estimates are free.
Usually, if we’re mimicking the original opening. A like-for-like half-round or arch swap stays within the existing header. New or enlarged openings in a load-bearing wall need a header change and structural review, which pushes cost and timeline. We’ll tell you which one your wall actually is.
$8,000 – $25,000 for a whole-house geometric package and $3,500 – $9,000 for a single feature unit with trim. Call (888) 419-3650 for an exact quote. Estimates are free, and we put the framing, glass and finish line items in writing.
The 730-Day Done Right Promise covers every custom & geometric window project we take on. If the units leak, the trim fails or the flashing isn’t right, we make it right. Manufacturer coverage on the units sits alongside it, and we walk you through that paperwork at the final inspection. Our background-checked, uniformed technicians handle every stage from template to trim.
Get a Free Estimate for Custom & Geometric Windows in Alamo
A free on-site estimate starts with a walk of the house, measurements at every opening, and a conversation about material and shape. We come back with a written line-item quote and a shop drawing you approve before any order is placed. Our Windows & Doors team handles the whole scope, and calls are answered by a live person 24/7. Call (888) 419-3650 to schedule your estimate in Alamo.
Written by the team at Groundwork Construction Co..