Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Driveway Repair & Replacement in Pleasant Hill, CA: What It Involves and What It Costs
Driveway repair and replacement in Pleasant Hill typically runs $5,000 – $14,000 for a full replacement and $250 – $700 for sealing and crack repair, with most full tear-outs finished in 3 to 6 working days. The number that matters most is whether your existing slab or asphalt can be saved or has to come out. Call (888) 419-3650 and we’ll walk you through which side of that line you’re on before anyone swings a hammer.

How Driveway Repair & Replacement Actually Runs, Stage by Stage
No two driveways in Pleasant Hill fail the same way, but the sequence that fixes them follows the same track. Here’s what you’ll see from the first walk-through to the final sweep, and where you get to make calls.
Day 1 – Assessment and layout. We measure the footprint, check slope, and look at drainage at the garage threshold. A lot of the driveways we replace in Pleasant Hill sit on slab-on-grade ranch homes where the original pour has settled toward the house, so water pools at the door instead of running out to the street. We mark the tear-out line and confirm what’s under the surface before anything gets cut. You decide the material and confirm the footprint.
Day 1 or 2 – Demo and haul-out. Old concrete, asphalt, or pavers come out with a mini excavator and hand tools around the edges. This is a full day on a standard two-car driveway, longer if the sub-base is heavy clay. You don’t have to decide anything here, but this is where those shallow, daylight-style foundations common in mid-century Pleasant Hill homes show up: if the footings are close to the surface, the sub-base depth changes and we tell you on the spot.
Day 2 or 3 – Sub-base prep and grading. We grade, compact in lifts, and set the slope away from the house. On hillside lots backing to the open-space ridges, this step includes checking that the driveway still drains toward the street and not into a side yard or retaining wall. You review the drainage plan with us before the base is sealed.
Day 3 or 4 – Installation. Concrete gets formed, poured, and finished. Pavers go down over a compacted base with edge restraint. Asphalt is laid and rolled in lifts. You pick the finish (broom, exposed aggregate, paver pattern) up front during the estimate – not once the truck’s arrived.
Day 5 or 6 – Cure, cure time, and inspection. Concrete needs 24 to 48 hours before foot traffic and about 7 days before you park on it. Pavers are driveable the same day. If the project triggers a grading review or a permit, we handle the inspection walkthrough with you. Then we do a final sweep, review the work against the estimate line by line, and you sign off.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Material and finish are the biggest levers on both the look and the price. Here’s what we actually quote in Pleasant Hill, and the honest trade-off on each.
- Concrete (poured): The default for a rebuild on a mid-century ranch home. Lowest cost per square foot, holds up well, but it cracks over time and can’t be patched invisibly. Good for a straightforward replacement.
- Pavers (Belgard, Unilock, Tremron, or Techo-Bloc): More expensive up front but you can pull a single paver if it settles or cracks. On a driveway with tight access or a tight slope, pavers flex better than concrete. Different brands carry different color runs and textures, and some patterns cut down the number of odd edge pieces on an angled driveway.
- Asphalt: Lowest cost, fastest install, but needs sealing every couple of years and re-paving sooner than concrete or pavers. Fine choice if you’re staying a few years rather than decades.
- Sealing and crack repair: On a driveway that’s still structurally sound, crack filling plus a seal coat extends its life for a few hundred dollars. Worth it before the winter rain gets into the joints.
- Exposed aggregate or broom finish: A finish choice, not a material choice, but it changes the texture and slip resistance and adds a small premium over a plain broom finish.
What Driveway Repair & Replacement Costs in Pleasant Hill, CA
A full driveway replacement lands at $5,000 – $14,000 for a standard two-car footprint. Crack repair and sealing to extend an existing driveway runs $250 – $700. For a new surface from scratch, concrete driveway installation is $4,500 – $12,000, paver driveway installation is $7,000 – $18,000, and asphalt paving is $3,500 – $9,000. A repair and a replacement are two different jobs, and the estimate tells you which one you actually need.
What pushes a Pleasant Hill driveway to the high end:

- Size: A single-car footprint sits near the low end. A wide two-car or a pull-through driveway moves you toward the top.
- Existing condition: If the sub-base is stable, you’re replacing only the surface. If it’s settled or cracked, the sub-base comes out too, which adds a day and a few hundred dollars.
- Access and slope: A steep or tight driveway needs more formwork and more careful grading. Hillside lots along the open-space ridges carry more of this than a flat ranch lot.
- Material grade: Plain concrete at the bottom, upgraded pavers at the top. Pattern and color choices add on.
- Drainage and permits: If the project triggers a grading or drainage review, that adds time and inspection steps. We handle the permit work for you.
A written estimate from us is line-item: demo, grading, base, material, finish, and haul-out, with the number we quote being the number you pay. Upfront pricing, no surprises. What a driveway estimate typically doesn’t include: moving a gas line, relocating a utility, or a structural change to the garage. If your project touches that, we’ll say so on the estimate, not halfway through.
See the difference
Before
After
Before
After
Before
AfterWhat Pleasant Hill Homes Specifically Do to This Job
Pleasant Hill is a built-out, post-WWII Contra Costa suburb. Nearly all of the driveway work here is replacement or repair on existing lots, not new construction, and that shapes the job. The dominant housing stock is 1950s to 1970s single-story ranch homes on slab-on-grade foundations, and those original slabs often have settled toward the garage, which is why so many driveways in 94523 slope the wrong way and pool water at the door before the winter rain starts.
Because the city sits on the Concord fault and beneath oak-studded hills, a driveway replacement near a slope can trip both seismic and drainage review that a flat-lot rebuild in Concord or Bay Point won’t see. Original driveway drainage on hillside lots backing to open space is a real design issue, not a checkbox. And the hot, dry summers followed by rain load are what crack these surfaces in the first place: the expansion and contraction is the failure mode we see most often, along with tree-root heavage on driveways near the oak canopy.
This is one part of a wider scope. If your driveway project is part of a larger front-yard rebuild, that’s work covered under Driveway & Pavers in Pleasant Hill, and we also handle the drainage and grading side under our Driveway & Pavers service. If you’re also converting a garage or building an addition, homeowners often pair a new driveway with Junior ADU & Interior Conversion in Pleasant Hill or ADU Site Prep & Utilities in Pleasant Hill so the site work happens in one pass. We cover all of Pleasant Hill and the surrounding area.
Serving Pleasant Hill, CA – Our Local Coverage Area
We serve Pleasant Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Driveway Repair & Replacement in Pleasant Hill
A full driveway replacement typically takes 3 to 6 working days, from tear-out through cure time. A crack repair plus seal coat is usually a single visit. Call (888) 419-3650 to find out which your driveway needs.
Often yes, especially if the work changes grading, affects drainage, or sits on a hillside lot backing to open space. Pleasant Hill runs a strict small-city permitting process, so we check before we schedule. We pull the permits and take the inspection through to sign-off. Call (888) 419-3650 and we’ll tell you what your project requires.
In most cases, yes. A driveway sits outside the foundation, so the work is separate from your plumbing and framing. The exception is a garage conversion or addition that touches the footprint – we’ll flag that in the estimate so you know before the job starts. Call (888) 419-3650 to set up a free on-site estimate.
Crack repair and sealing typically runs $250 – $700, which is a fraction of a full replacement. If the slab is stable and the cracks are cosmetic, it buys you a few more years. Call (888) 419-3650 for an exact quote – estimates are free.
Every driveway project we complete is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s in writing. Call (888) 419-3650 with any warranty question.
Get a Free Estimate for Your Pleasant Hill Driveway
Call (888) 419-3650 for a free on-site estimate for driveway repair & replacement in Pleasant Hill. We’ll measure the footprint, check the slope and sub-base, tell you honestly whether a repair or a replacement is the right call, and put a line-item number in writing. One of our technicians handles the walk-through. Projects over $10,000 come with $1,000 off, and 0% financing for 18 months is available.
Written by the team at Groundwork Construction Co.