Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Emergency & Storm Damage in Danville: What It Costs and How Fast You Can Get Dried In
Storm damage in Danville usually means a roof breach, torn underlayment, or a wind-driven leak around a valley, skylight, or chimney chase – and the first 48 hours determine whether it stays a $400 – $1,800 repair or turns into a drywall and insulation claim. Emergency response here covers tarping and water diversion on day one, a full attic and moisture inspection, then permanent repairs where the structure is already compromised. Call (888) 419-3650 and we’ll tell you honestly whether you need a board-up or a full scope.

Most Danville storm calls we run fall into three buckets: wind-lifted tile or shingle fields after a winter atmospheric river, water intrusion at flashings and penetrations that only shows up in heavy rain, and debris or tree impact on the hillside lots. The estimate is free, the pricing is written line by line, and the work carries our 730-Day Done Right Promise – if it’s not done right, we make it right.
How We Handle Storm Damage From First Call to Final Walkthrough
Storm work isn’t a normal remodel. There’s a triage phase, a stabilization phase, and only then the permanent repair. Here’s the actual sequence.
Stage 1: Immediate triage and dry-in (0 – 24 hours)
A live person answers the phone any hour, any day, and we start by asking the right questions: is water actively dripping, is there visible sagging in the ceiling, has the attic gotten wet. If the answer points to an active breach, the first move is stopping water from spreading – tarps, temporary sealant at the breach, and diversion away from stucco and fascia. We don’t demo anything the same day unless the ceiling is at risk of coming down. You decide at this stage whether you want us out for the emergency call only or for the full repair scope.
Stage 2: Full inspection and moisture mapping (day 1 – 2)
Once the roof isn’t taking on more water, we get into the attic and look for wet decking, saturated insulation, stained rafters, and rusted fasteners. That matters more on Danville’s older homes than people expect – a leak that ran for one storm cycle can soak the insulation facing and start blocking attic ventilation, which compounds the damage. Moisture readings at the ceiling and along the top plate tell us whether the drywall has to come out. You get a written scope with the affected zones called out before we touch anything.
Stage 3: Demo and dry-out (day 2 – 4)
Wet drywall, saturated batt insulation, and any compromised sheathing come out. We set air movers and dehumidifiers and hold them until readings come back dry – on a typical Danville ceiling assembly, that’s two to three days, not a single afternoon. Insulation is replaced, framing is treated if there’s any sign of organic growth, and the cavity gets inspected before it’s closed up. You approve the re-insulation and sheathing repair here, and that’s where most of the swing in the final number happens.
Stage 4: Permanent repair (day 4 – 10)
This is the real work: replacing damaged sheathing, laying new underlayment, matching the existing tile or shingle to the rest of the plane, resetting flashings and counter-flashings at chimneys and sidewalls, and re-sealing penetrations. On a tiled California ranch roof we’re pulling and resetting field tiles rather than patching over them. Most storm repairs we run in Danville finish within a week once materials are on-site, though specialty tile matches can add a few days on lead time.
Stage 5: Final inspection and warranty walkthrough
We do a water test on the repaired area, walk the attic one more time, and hand you a written close-out that documents what was replaced and what wasn’t. The repair is covered by our 730-Day Done Right Promise, and the walkthrough is where we show you the photos so you can see exactly what got fixed. Anything that needs a permit gets signed off with the city before we call the job done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Repair and Replacement Options You’ll Choose Between
What we install depends on what’s up there now and what your budget and timeline allow. These are the real trade-offs.
- Match the existing roof exactly: pull and reset tiles, source matching shingles or tile profile. The upside is that the roof stays visually uniform and no one can spot the repair from the street. The trade-off is lead time – matching discontinued tile on a 1990s Mediterranean home can take a week or two, and sometimes you’re sourcing from a reclaimed lot.
- New underlayment under existing tile: if the fire is the underlayment failure and the tile itself is sound, we lift the field, replace the underlayment, and reset. It costs less than a full reroof and preserves the look, but it only works when the tile passes a breakage check – older brittle tile cracks during the lift and you replace more than expected. That’s a real number to budget for.
- Full replacement of a storm-damaged plane: when wind has lifted the field or hail has bruised shingles across a whole slope, we replace that plane rather than patching it. This is the higher-cost path but it’s the one that doesn’t leave you chasing leaks for the next five years.
- Fire-rated and impact-rated assemblies: in the western hillside zones, matching a repair to a fire-hardened assembly matters for both insurance and defensibility. Impact-rated materials add cost, but they change how the roof survives the next debris event. Many homeowners pair this with Impact Garage Doors in Danville for the same reason.
- Gutter and drainage repair: storm water that can’t get off the roof goes into the fascia and stucco. If the gutters are undersized or clogged, we address that as part of the fix so the same leak doesn’t come back.
On paver driveways and hardscape that take storm runoff damage, we typically work with Belgard or Techo-Bloc products – both hold up well to the freeze-thaw and sun the Tri-Valley throws at them.
What Emergency & Storm Damage Costs in Danville, CA
Most storm damage calls we run in Danville land between $400 and $1,800, with the low end being a tarp, a flashing repair, or a small leak at a penetration, and the high end being a section of roofing and sheathing replaced. If the damage has gotten into the interior, the repair stack can push past that range and a full roof replacement sits at $8,000 – $20,000.

Here’s what moves the number:
- Scale of the breach: a localized flashing repair is fast and cheap; a wind-lifted field means pulling and resetting tile across a whole slope.
- What’s underneath: if only the surface failed, the price stays low. If the sheathing, insulation, or attic framing got wet, the scope widens and that’s the biggest single swing.
- Material match: discontinued tile and shingle profiles cost more to source and take longer to arrive. Current production materials are cheaper and faster.
- Permit scope: small repairs are typically handled without a permit; anything touching structural sheathing or replacing more than a defined area needs one, and that adds inspection time and a fee.
- Hillside access and defensible space: on the steeper 94506 lots, staging, access, and working around brush clearance add labor.
A written estimate covers the inspection, the temporary dry-in if needed, materials, labor, haul-off, and permit pull where applicable. What it won’t cover is hidden damage we can’t see until the roof is open – and we don’t hide that. If we find it during demo, you get a revised line-item number before we proceed. No change-order surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Danville Homes Specifically Do to This Job
Danville is built out, and almost all the storm work here happens on existing homes – 1960s through 1990s custom and semi-custom ranches and Mediterranean builds on large lots, a lot of them stucco-and-tile with original framing and mature landscaping close to the structure. That means a leak that starts at a chimney chase on a home in the 94526 core often rides an older stucco wall and shows up as a stain somewhere unexpected. We work on homes people intend to keep, so matching the existing detailing and getting the repair to disappear matters as much as stopping the water.
The western hillsides out toward Tassajara and Blackhawk are a different playbook. That’s the WUI fire-zone side, where the higher wind exposure and the defensible-space rules change what a repair assembly can look like, and where brush and tree debris are a bigger part of the storm damage picture. In the flat, established 94526 side, our storm calls are dominated by wind-driven rain at flashings and skylights. Different geography, different failure modes, and we plan the scope around which one of those you’re on.
Serving Danville, CA – Our Local Coverage Area
We serve Danville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Emergency & Storm Damage in Danville
A minor flashing or leak repair takes one visit, often under half a day. Interior damage with dry-out adds two to three days for drying before the permanent repair, and full repairs typically finish within seven to ten days of materials being on-site. Call (888) 419-3650 for an exact timeline on your home – estimates are free.
Small repairs and flashing work usually don’t require a permit, but anything replacing structural sheathing or a larger roofing area does, and the city inspection has to happen before close-out. We pull the permits and pass the inspections as part of the scope, and we tell you upfront which side of that line your project falls on. Call (888) 419-3650 to schedule an inspection and we’ll confirm the permit path.
Yes – temporary dry-in and water diversion are same-day work and are the first thing we do on an active leak. What we don’t do is promise a permanent repair the same day, because the attic and moisture mapping have to happen first. Call (888) 419-3650 any hour and a live person will walk you through what to do right now.
Most wind and storm damage is covered under standard homeowners policies, but the documentation is what makes or breaks the claim. We provide written scopes, photos, and line-item pricing you can submit to your adjuster, and we don’t do the work until you know what your carrier is and isn’t covering. Call (888) 419-3650 and we’ll get the inspection scheduled.
Every storm repair is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s on top of the material manufacturer’s warranty where applicable. Call (888) 419-3650 for the written warranty terms and a free estimate.
Get a Free Emergency & Storm Damage Estimate in Danville
We offer free on-site estimates for emergency and storm damage throughout Danville, ZIP codes 94526 and 94506 included. When you call (888) 419-3650, a live person answers any hour, asks the right questions, and books an inspection – you’ll get a written line-item scope with no surprises, plus our 730-Day Done Right Promise on all work. From foundation to finish line, we’re the contractor that puts it in writing.
Written by the team at Groundwork Construction Co.