Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Windows & Doors in Concord: What the Job Actually Involves
Impact windows and doors in Concord typically run $8,000 – $25,000 for a whole-house package, and a typical single-story ranch takes 2 – 4 days to install once the units land. Each unit is a laminated glass assembly in a reinforced frame, rated to hold together under wind-borne debris and tested to California’s wildfire and wind-load standards. Call (888) 419-3650 and we’ll price your house specifically – estimates are free and there’s no pressure to buy that day.

How We Run an Impact Window & Door Install, Stage by Stage
Every job follows the same five-stage sequence. Here’s what actually happens, when, and what you’ll be deciding along the way.
Stage 1: On-site measure and product selection (about 90 minutes)
We measure every opening – width, height, sill depth, frame type, and whether the existing trim is stucco-return, wood-cased, or flush. You’ll see samples of frame finishes and glass options that day. Most Concord homeowners spend the back half of this visit choosing between vinyl and fiberglass frames and deciding whether to upgrade to laminated glass on the sunny west-facing windows.
Stage 2: Permit submittal and HOA approval (7 – 15 business days)
We pull the permit and prepare the packet your HOA wants – product data sheets, wind-load ratings, and a window schedule with dimensions. Concord’s older tract homes have HOAs, and impact windows need to match the approved style and color for the subdivision. We don’t start demo until both clear.
Stage 3: Delivery and staging (day 1 of install)
Units arrive on a flatbed and get staged by elevation – front, back, sides – so the crew isn’t hunting for the right window mid-install. We lay drop cloths, move furniture away from each opening, and confirm glass labels match the window schedule before anything comes off the wall.
Stage 4: Removal and installation (days 2 – 3, or up to day 4 for larger homes)
Old windows come out one at a time, not the whole wall at once, so the house stays secured overnight. Each opening gets flashed, sealed with exterior-grade caulk, and set with shims and fasteners rated for the frame material. Impact doors – sliding or hinged – get the same treatment plus a check that the lock and handle hardware is functioning before trim goes back on.
Stage 5: Inspection and final walkthrough (day of completion)
We call for the inspection, walk every window with you, demonstrate the locking and opening operation, and hand over the product warranty documents. Any touch-up paint or stucco patching gets scheduled before we leave. You’ll have a written punch list and a date to come back if anything needs attention.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
There are four real decisions on an impact window and door package, and each one moves the price.
- Frame material: Vinyl is the value choice, holds up well in Concord’s heat, and costs less. Fiberglass is stronger, expands and contracts less in the summer swings, and takes paint or stain like wood. It’s worth the upcharge on south- and west-facing openings.
- Glass package: Laminated impact glass (two panes bonded to a plastic interlayer) is the baseline requirement. Low-E coatings and argon fill reduce heat gain on the sunny side of the valley; upgrading to a triple-pane assembly adds cost but pays back in comfort on west-facing walls.
- Door style: Sliding impact doors are the easiest to fit in existing openings; hinged and French-style doors add hardware cost and require more framing. If the opening is over 8 feet, expect to pay for a heavier-duty frame and reinforced header plate.
- Finish and hardware: Standard colors run from white to bronze to black. Custom colors add lead time (typically 2 – 4 weeks) and cost. Lock and handle upgrades are worth it on exterior doors – cheap hardware fails first in coastal salt air.
What Impact Windows & Doors Cost in Concord, CA
Our range for a full impact window and door package in Concord is $8,000 – $25,000. A typical single-story ranch with 12 – 15 openings lands in the middle of that range. Here’s what moves the number:

| Cost factor | Low end | High end |
|---|---|---|
| Number of openings | 6 – 8 units | 20+ units |
| Frame material | Standard vinyl | Fiberglass with custom finish |
| Glass upgrade | Laminated only | Laminated + Low-E + argon |
| Existing condition | Standard wood-frame openings | Rotted framing, stucco repair, custom sizing |
| Door count | 1 standard slider | 3+ hinged impact doors |
| Permit scope | Straight replacement | Window size changes, structural header work |
A written estimate includes removal of old units, new impact assemblies, flashing and sealing, trim restoration, permit fees, inspection, and disposal. It does not include interior painting or drywall repair if the existing opening is larger than the new frame; we flag that in writing before work starts so there are no change orders later.
See the difference
Before
After
Before
After
Before
AfterWhy Concord Homes Handle This Job Differently
Concord’s ranch-tract buildout from the 1950s through the 1970s means most of the impact window work we do here starts with framing that was never dimensioned for a modern assembly. We regularly find original single-pane aluminum windows set into shallow jambs with no flashing, running along the west-facing wall of neighborhoods near the Concord BART corridor and the older tracts off Clayton Road and Treat Boulevard. The cold night air rolling down from Mount Diablo condenses on those single panes and the wood sill behind them softens over decades; by the time a homeowner calls, the framing needs sistering before the new unit can go in. That’s why the estimate for a Concord impact job sometimes runs 15 – 20% higher than the same square footage in a newer build – framing repair is the line that catches people off guard.
Permitting runs through the city’s building division, and impact window replacements fall under the same permit process as standard window swaps. HOAs in the older subdivisions – particularly around the Ygnacio Valley and Treat corridors – typically require a design review before installation. We prepare the submittal for you, which saves a week of back-and-forth. This work is part of a full Windows & Doors in Concord scope when a homeowner is updating multiple exterior openings at once, and we’re happy to discuss how impact units fit into that wider project. Homeowners in Concord often pair the install with a matching Aluminum Fence in Concord around the pool or side yard, and we coordinate both jobs so the crews aren’t stepping on each other. If the fencing is wrought iron instead, our Iron Fence in Concord work follows the same timeline. Our Windows & Doors service covers every product in this category, and we work across Concord and the surrounding East Bay cities – Pleasant Hill, Walnut Creek, Bay Point, and Pittsburg included.
Serving Concord, CA – Our Local Coverage Area
We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Impact Windows & Doors in Concord
A typical single-family home in Concord takes 3 – 4 days from demo to final inspection, plus 7 – 15 business days for permit and HOA approval before we start. Larger homes with 20+ openings stretch to 5 days. Call (888) 419-3650 and we’ll give a firm timeline for your specific house.
Yes. The City of Concord requires a building permit for window and door replacement, and the inspection covers flashing and structural attachment. We pull the permit for you and schedule the inspection – it’s included in our written estimate. Call (888) 419-3650 to confirm your project scope.
In most cases, yes. If the new unit matches the existing opening dimensions, no structural or plumbing work is needed. When we’re widening an opening or converting a fixed window to a door, we flag the structural work and any electrical or plumbing relocation in the estimate. Call (888) 419-3650 for a scope walkthrough.
Most Concord projects land between $8,000 and $25,000, depending on unit count, frame material, glass upgrades, and whether framing repair is needed. Get a written line-item quote from us before you commit – call (888) 419-3650 and estimates are free.
Every install is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right, for two full years after the final walkthrough. Manufacturer warranties on the glass and frames pass through to you in writing. Call (888) 419-3650 with any warranty question before work begins.
Get a Free Impact Window & Door Estimate in Concord
We’ll come to your house, measure every opening, show you the frame and glass samples, and give you a written line-item estimate – no change orders later, no surprise line items. The number you see is the number you pay. Call (888) 419-3650 to schedule your free estimate. Live person answers, 24/7. Financing at 0% for 18 months is available, plus $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co.