Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterIron Fence in Antioch, CA
Iron fencing in Antioch typically runs $2,800 to $7,500 for a standard residential lot, depending on height, style, and how much gate work you need. If you want a boundary that looks sharp from the street, holds up to Contra Costa County sun and clay soil, and lasts decades with minimal fuss, wrought iron or ornamental steel is the material that delivers. We install iron fencing across Antioch as part of our Fence Installation in Antioch work, and we handle it the same way we handle every project: upfront pricing, no surprises, and a 730-Day Done Right Promise behind the workmanship.
Call (888) 419-3650 for a free estimate. A live person answers, 24 hours a day, seven days a week, so you’re never stuck leaving a voicemail on a Saturday afternoon.
Here’s the honest picture of iron fencing in Antioch. This isn’t a fence you slap up between two posts and forget. Iron is heavy, it’s unforgiving of a bad footing, and in Antioch the soil and the summer heat both push back. Clay-heavy ground across much of the city shifts with the wet winters and bakes hard by July, which is why we set posts in concrete footings sized for the load rather than eyeballing it. Do that part wrong and you get sagging panels and gates that drag within two seasons. Do it right and you get a fence that outlasts the landscaping around it.
Our technicians have up to 12 years of experience with ornamental metal, and every one of them is background-checked and arrives in uniform. That matters more than it sounds when someone’s going to be digging footings along your property line for a couple of days.
Key Takeaways
- Iron fencing in Antioch generally costs $2,800 to $7,500 for a typical residential lot, with gates and custom design at the higher end.
- Proper concrete footings are the whole game in Antioch’s clay soil. Skip them and your fence sags fast.
- We back every iron fence with the 730-Day Done Right Promise. If it’s not done right, we make it right.
- Upfront pricing means the number you see is the number you pay, plus 0% financing for 18 months and $1,000 off projects over $10,000.
- Call (888) 419-3650 any time. A real person picks up.
When You Need Iron Fence
Homeowners reach out to us for iron fencing for a handful of recurring reasons. A few of them come up again and again in Antioch specifically.
- Your old wood fence is leaning or rotting out. We see this constantly in the older neighborhoods near downtown Antioch, where wood fences have taken 15 or 20 years of sun and winter rain. Iron gives you a permanent replacement rather than another round of patching.
- You want a front-yard boundary that reads as high-end. Iron makes a strong first impression and pairs well with the stucco and Mediterranean-style homes common in the newer developments off Hillcrest Avenue. It frames landscaping instead of hiding it.
- You need a pool barrier that actually meets code. California pool safety rules are strict about height, gaps, and self-closing, self-latching gates. An iron pool fence can satisfy those requirements while looking far better than a mesh barrier.
- Your property line runs along a busy street or a corner lot. If you’re near Lone Tree Way or another high-traffic road, iron gives you a durable, see-through barrier that holds up better than wood to the dust and vibration of a busy street.
- You want security without a solid wall closing you in. Iron keeps sightlines open, which many Antioch homeowners prefer for the front of the house. It signals a clear boundary while still letting light and air through.
- You’re matching an existing iron fence or gate. Maybe a previous owner put up iron on one side, or you’re tying into a shared boundary. We can match height, picket spacing, and finish so it looks like it was planned as one fence.
Our Iron Fence Process
We run iron fence projects the same way every time, because the steps that protect your property and your investment don’t change based on the size of the job.
- Free on-site estimate and design consult. We walk the property with you, measure the run, talk through style and height, and flag anything that affects the build, like sloping ground, existing utilities, or a gate that needs to swing a specific direction. You get a clear number before anyone touches a shovel.
- Utility locating and layout. Before we dig a single footing, we confirm where the buried lines run and mark the fence line. This is the step fly-by-night crews skip, and it’s the one that keeps you from hitting an irrigation line or worse.
- Footing excavation and concrete set. We dig and pour concrete footings sized for the iron panels and the soil conditions in your part of Antioch. Posts get set plumb in concrete and left to cure properly. Fast-curing shortcuts are how gates end up dragging a year later.
- Panel and gate installation. Once the footings are ready, we set the panels, hang the gates, and check every latch and swing. Self-closing hardware goes on pool gates where code requires it. We test the whole run before we call it finished.
- Finish and final walkthrough. We touch up welds and finish, clean up the site, and walk the fence with you so you can see the work up close and ask questions. Nothing gets left for you to discover later.
- Backed in writing. The whole installation sits under our 730-Day Done Right Promise. If something isn’t right, we come back and fix it. Built to last, backed in writing.
Iron Fence Pricing in Antioch
Iron fence pricing in Antioch usually lands between $2,800 and $7,500 for a typical residential lot, and here’s what moves that number within that range.
| Item | Typical Price Range |
|---|---|
| Basic ornamental iron run (per linear foot) | $30 – $60 |
| Wrought iron, heavier gauge (per linear foot) | $45 – $90 |
| Walk gate, standard | $350 – $800 |
| Driveway gate (single or double) | $1,200 – $3,500 |
| Concrete footings and post set (per post) | $60 – $140 |
| Powder-coat finish upgrade | $200 – $600 |
The biggest cost drivers are total linear feet, iron gauge and style, gate count, and how much site work the footings require. Sloped or rocky ground takes longer to prep, and decorative pickets or custom scrollwork add material cost. Every one of those factors gets spelled out in your estimate, so you’re not guessing what you’re paying for.
We keep pricing upfront, no surprises, which means the number on the estimate is the number you pay. For larger projects, we offer 0% financing for 18 months, and right now projects over $10,000 get $1,000 off. If you’re also considering other improvements, our home page lays out the full range of what we do, from roofing to additions. Iron boundaries don’t have to be a standalone project.
Ready for a real number? Call (888) 419-3650 and we’ll set up a free estimate. No pressure, no fine print.
Why Iron Fencing Holds Up in Antioch
Antioch sits where the delta breeze meets inland heat, and that swing between wet winters and long dry summers is hard on fences. Wood swells, dries, cracks, and warps year after year. Iron doesn’t care. It sheds water, doesn’t rot, and doesn’t feed termites. The one thing that damages iron over time is standing moisture around the base, which is why our footing work puts a barrier between the metal and the soil and why powder-coat finishes are worth the upgrade in this climate.
The clay-heavy soil across much of Antioch is the other factor. It expands when wet and contracts when it dries, and that movement is what pulls poorly set posts out of plumb. We account for it with deeper, properly sized footings. This is also why we take our time on the cure rather than rushing a set. Panels that go on too early never sit right.
When it comes to matching iron to your home’s style, we source from proven partners and tailor the look to the architecture. For neighborhoods with warmer Mediterranean or stucco facades, a clean, simple picket line often reads best. If your exterior leans more traditional, decorative scrollwork fits right in. We treat the fence as part of the property’s curb appeal, not an afterthought.
What to Know Before You Hire an Iron Fence Contractor
Iron work isn’t a job for a general handyman, and it’s a category where the gap between good and cheap shows up fast. A few things worth checking before you sign anything:
- Ask how they set posts. If the answer doesn’t involve concrete footings sized for the load, walk away. This is the single biggest predictor of whether your fence stays straight.
- Ask who’s actually on the crew. Iron is heavy and the work is physical. You want to know the people on your property are vetted. Ours are background-checked, uniformed, and show up as a team you can identify.
- Get the warranty in writing. Our 730-Day Done Right Promise is one of the longest workmanship guarantees in the residential construction space. A real contractor puts their guarantee on paper, not in a sales pitch.
- Confirm the number doesn’t move. Vague bids that balloon mid-project are the most common complaint homeowners bring to us. Upfront pricing means you know the total before work starts.
- Check how they handle the gate. Gates are where most iron fences fail first. Make sure the quote accounts for hardware, alignment, and, where required, self-closing latches.
If you’ve been burned before by a crew that disappeared or a bid that quietly grew, we get it. That’s exactly why we do estimates in writing, answer the phone live around the clock, and stand behind the finish.
Iron Fencing for Pool Barriers and Property Lines
Two of the most common reasons Antioch homeowners call us for iron are pool safety and property line definition, and each has its own considerations.
For pool barriers, California rules on height, picket spacing, and self-closing, self-latching gates are specific. We build to those requirements so your iron pool fence does the job it’s supposed to: keep kids and pets safe. That’s the part that matters most. Everything else is secondary to a barrier that actually works.
For property lines, especially on corner lots or boundaries facing busy roads, iron gives you a clear, durable edge that holds its shape through our soil’s wet-dry cycle. We measure and layout carefully so the fence sits where it’s supposed to along the line. If you’re also finishing out a driveway or walkway and want the hardscape to tie in, our services overview covers the options, and we can coordinate timing so the iron and the pavers don’t fight each other.
Common Mistakes We See With Iron Fences in Antioch
- Shallow footings. The number one reason iron fences lean is a post set too shallow in moving clay. We go deeper and set in concrete.
- Rushing the concrete cure. Panels forced onto green footings drift out of plumb. Patience here saves you a redo.
- Skipping the powder-coat. Bare or cheaply finished iron rusts faster in our climate. The upgrade pays for itself.
- Ignoring the gate hardware. A gate that won’t close or won’t latch properly is a code problem for pool barriers and a daily annoyance everywhere else.
- No utility locate. Digging blind risks hitting buried lines. We always locate before we excavate.
FAQs – Iron Fence
How much does an iron fence cost in Antioch?
Iron fencing in Antioch typically runs $2,800 to $7,500 for a standard residential lot, with per-foot pricing around $30 to $60 for basic ornamental iron and more for heavier gauge or wrought iron. Gates, footings, and finish upgrades add to that. Call (888) 419-3650 for an exact quote, and the estimate is free.
Can you install iron fence the same day?
Most iron fence jobs aren’t a single-day finish, because the concrete footings need time to set before panels go on. We can often get the estimate and layout done quickly and schedule the install close to your timeline. Call (888) 419-3650 and we’ll give you a realistic schedule up front. A live person answers around the clock.
Is an iron fence a good choice for a pool barrier in Antioch?
Yes. Iron fencing can meet California pool barrier requirements for height, picket spacing, and self-closing, self-latching gates, and it holds up far better than wood or mesh over time. We build to those code requirements and test every gate before the final walkthrough. Call (888) 419-3650 to talk through your pool layout.
How long does an iron fence last?
A properly installed, powder-coated iron fence can last many decades with basic upkeep, largely because iron doesn’t rot or feed insects the way wood does. The main threats are moisture at the base and finish wear, both of which we address with proper footings and finishes. Call (888) 419-3650 with questions about your specific site.
Do you offer a warranty on iron fencing?
Yes. Every iron fence we install is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space. Call (888) 419-3650 to learn what’s covered.
Get Your Iron Fence Estimate
If you’re ready to put up a boundary that looks right, holds straight through Antioch’s clay and heat, and comes with a guarantee in writing, we’re the crew to call. Iron fencing is part of our Fence Installation in Antioch service, backed by background-checked, uniformed technicians, upfront pricing, and the 730-Day Done Right Promise. We also make larger projects easier to budget with 0% financing for 18 months and $1,000 off any project over $10,000.
Call (888) 419-3650 for a free estimate. A live person answers 24 hours a day, seven days a week, so reach out whenever it’s convenient for you. From foundation to finish line, we handle the whole thing and back it in writing.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch.