Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Brentwood, CA: What It Costs and How Long It Takes
Metal roof installation in Brentwood typically runs $15,000 to $40,000 and takes 1 to 3 weeks from tear-off to final inspection, depending on roof size, panel type, and how many penetrations the crew has to flash. Most homes in the 94513 ZIP sit on single-story or two-story stucco footprints where a standing-seam or stone-coated steel system replaces the original tile or composition roof without structural changes. Call (888) 419-3650 to schedule a free on-site estimate and a written line-item quote before you commit to anything.

How a Metal Roofing Project Actually Runs, Stage by Stage
Metal roofing is not a one-visit job, and anyone who tells you otherwise is skipping steps. Here is the sequence we follow on Brentwood homes, with the real durations.
Stage 1: Inspection and written scope (day 1)
We walk the roof, measure the square footage, photograph the decking, and check the existing underlayment and flashing. You get a written line-item quote within a couple of days, with the panel type, gauge, color, and trim listed separately. This is where you decide whether you want exposed fasteners or a concealed system, and whether the old roof comes off or gets a overlay (rarely the right call on a metal job).
Stage 2: Permit and material order (days 2 to 10)
We pull the permit through Contra Costa County and order panels cut to length. Custom-cut panels take 7 to 14 days to arrive, so this is the long pole. You pick your color from the sample book here, and we confirm the trim profile before the order is locked.
Stage 3: Tear-off and deck prep (days 1 to 3 of on-site work)
Old roofing comes off down to the deck. Any soft sheathing gets replaced, then we lay a high-temp underlayment rated for metal. On Brentwood’s stucco homes, the wall-to-roof transition often needs new step flashing because the original was mortared into the stucco. This is the stage where hidden rot or a sagging rafter gets found and priced.
Stage 4: Panel install and flashing (days 3 to 8)
Panels go up in rows, screwed or seamed depending on the system. Ridges, valleys, vents, and the chimney get flashed. On standing-seam, the seams are mechanically crimped; on exposed-fastener panels, every screw gets a sealing washer. This is the slowest part of the job and where workmanship shows.
Stage 5: Final inspection and walkthrough (day 8 to 15)
The county inspector signs off, then we walk the roof with you, show you the fastener pattern and flashing detail, and hand over the manufacturer warranty paperwork plus our 730-Day Done Right Promise in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Metal Roofing Options You’ll Choose Between in Brentwood
Every metal roof is a stack of decisions. Here are the ones that actually change how the roof performs and what it costs.
- Standing seam vs. exposed fastener. Standing seam hides the fasteners under a raised crimped seam and holds up 40+ years in Delta wind. It is the pricier choice, usually 20 to 30 percent above exposed-fastener panels. Exposed-fastener panels cost less but the washers can dry out and need re-sealing every decade or so.
- Panel gauge. 26-gauge is the standard residential build; 24-gauge is heavier and better on a large, open Brentwood roof span. Going heavier adds cost per square but resists oil-canning, that wavy look cheap panels get.
- Stone-coated steel. A steel panel with an aggregate top coat that mimics tile or shake. It suits Brentwood’s Mediterranean-style homes where a full tile-matching look matters but weight is a concern.
- Finish and color. A Kynar 500 finish in a cool-roof color reflects summer heat and tends to hold its color longer than a standard polyester finish. Dark colors absorb more of Brentwood’s 100°F-plus summer sun.
- Concealed vs. exposed underlayment. A high-temperature synthetic underlayment is the minimum for metal; a peel-and-stick membrane in valleys and around penetrations is worth the upcharge.
What Metal Roofing Costs in Brentwood, CA
A metal roof on a typical Brentwood home lands between $15,000 and $40,000. A small single-story ranch home with a simple gable can come in at the low end; a two-story home with multiple valleys, dormers, and a complex hip-and-gable profile pushes toward the top.

Four things move the number:
- Roof size and pitch. Square footage is the biggest driver. A steep pitch adds labor and safety rigging cost.
- Panel system. Standing seam sits above the exposed-fastener range; stone-coated steel sits in the middle.
- Deck and flashing condition. Replacing sheathing, adding step flashing at stucco walls, or correcting a sagging rafter adds $500 to $3,000 or more depending on scope.
- Penetrations and profile complexity. Valleys, dormers, skylights, and multiple chimneys each add flashing time.
A written estimate includes tear-off, disposal, underlayment, panels, trim, flashing, and permit. It typically does not include decking replacement beyond a set allowance, or any structural repair uncovered mid-job. We quote both up front so the number you see on paper is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Brentwood Homes Specifically Do to a Metal Roofing Job
Brentwood is a fast-growing agricultural-to-suburban edge city, and most of what we install here goes onto homes built from the 1990s through the 2020s: large stucco tracts on former orchard land, plus custom ranchettes on multi-acre lots in the surrounding hills. That build era matters, because the original underlayment on a 1990s Brentwood home is often past its service life even when the tile or composition above it looks fine, so tear-off and new underlayment are usually non-negotiable. The hot inland climate, with summer highs over 100°F and persistent Delta wind, dries out old flashing and can crack stucco at the wall-roof joint, which is where we find most leaks. Because these are new-build lots, grading and drainage rules apply that don’t exist in older Bay Area cities, and the county is strict about how roof runoff is routed off the lot. If your project is part of a full Roofing in Brentwood scope with gutters or fascia, we coordinate it in one estimate. Homeowners across Brentwood often pair this with Window Replacement in Brentwood while the scaffolding is up, and some add Impact Windows & Doors in Brentwood at the same time. If you want the wider picture, see our Roofing service page.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Metal Roofing Questions in Brentwood
A standing-seam metal roof lasts 40 to 70 years in Brentwood’s climate, and stone-coated steel runs 30 to 50 years. The Delta wind and 100°F summers are the main stressors, so a heavier gauge and a Kynar finish earn their cost over time. Call (888) 419-3650 for a lifespan estimate based on your specific roof.
Yes. Contra Costa County requires a permit for a full metal roof replacement, and the county inspects decking, underlayment, and flashing. We pull the permit and pass the inspection as part of the job, so you don’t have to chase it. Call us for a quote that includes the permit line.
In almost all cases, yes. A metal roof is a like-for-like replacement over the existing deck, and plumbing and structure stay put unless the inspection turns up rot or a damaged rafter. When we do find structural issues, we price them separately before any work starts. Call for a free inspection and exact quote.
Metal roof installation in Brentwood runs $15,000 to $40,000 depending on roof size, panel system, and deck condition. Standing seam costs more than exposed-fastener panels; a complex two-story roof costs more than a simple gable. Call (888) 419-3650 for a written, line-item estimate at no charge.
The panel manufacturer covers the finish and material, and we back the installation with our 730-Day Done Right Promise in writing. If something isn’t right, we come back and make it right. Call for the full warranty terms on your chosen system.
Get a Free Metal Roofing Estimate in Brentwood
A metal roof is a long-horizon decision, and you should see the exact number before you sign anything. Call (888) 419-3650 and a live person picks up any hour, any day, to set up a free on-site estimate in Brentwood. We’ll walk the roof, measure, and hand you a written line-item quote with the panel, gauge, and color spelled out. No change orders, no surprises.
Written by the team at Groundwork Construction Co.