Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sliding & Patio Doors in Brentwood, CA: What the Job Actually Involves
Replacing or adding sliding & patio doors in Brentwood typically runs $4,500 to $15,000 depending on opening size, frame material, and whether the wall has to be modified. A straight swap of an existing slider takes one to two days; cutting a new opening in a stucco wall and adding a header takes three to five. Call (888) 419-3650 and we’ll walk your opening, check the header, and give you a written line-item number before anything gets ordered.

How We Install Sliding & Patio Doors, Stage by Stage
Every Brentwood install follows the same sequence, and you’ll know what’s happening on each day before we start.
Day 1: Measure, open the wall, confirm the header
We pull final measurements at the rough opening, not just the trim. On stucco homes, that means probing for the framing and confirming there’s a proper header above the opening. If the header needs to be added or upgraded, that decision happens here, before any door is ordered, because it changes both the schedule and the price. Most measurements take 60 to 90 minutes.
Day 1-2: Demo and prep
Out comes the old door, the threshold, and any rotted sill or framing we find behind it. Brentwood’s dry heat cracks stucco and lets water in at old thresholds, so we check the sill pan and flashing closely. If the framing is sound, prep is a half day. If there’s rot, expect to add a day and a small material charge, which we quote before we cut.
Day 2-3: Set the door and flash it
The new unit goes in level and square, then gets flashed and sealed at the sill, jambs, and head. This is the step that decides whether the door leaks in five years, so it gets the most time. Sliding panels get adjusted for smooth track travel. You’ll choose your handle style and screen configuration at this stage.
Day 3-4: Stucco patch, trim, and finish
We patch the stucco to match the surrounding wall texture and color, install interior trim, and touch up paint at the perimeter. Matching a 1990s Spanish-style stucco finish takes a color sample, not a guess, so we take one before ordering patch material.
Final walkthrough and inspection sign-off
We operate the door, check the lock, verify drainage slope at the threshold, and hand you the manufacturer paperwork. If the job required a permit, the final inspection happens after the stucco patch cures, usually within a week. You don’t chase the inspector; we schedule it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Sliding & Patio Door Options You’ll Choose Between
The door itself is the easy part once you know what each material actually does in Brentwood’s heat and wind.
- Vinyl sliders: the value pick, $4,500-$8,000 installed for a standard 6-foot opening. They handle inland heat well and won’t rot, but they flex slightly in extreme temperature swings and the frames can look dated next to a stucco wall. A good fit for a rental or a back bedroom.
- Aluminum with a thermal break: thinner frames, more glass, and a modern look, $6,000-$11,000. Strong against Delta wind. The trade-off is that bare aluminum conducts heat, so a thermal break is non-negotiable in Brentwood’s summers.
- Wood-clad (Andersen and Marvin both make strong options here): real wood inside, weather-resistant cladding outside, $9,000-$15,000. The best look on a Spanish-style home and the best resale value. You’ll pay more and want to keep up on the interior finish.
- Multi-panel and corner sliders: three or four panels that stack or pocket to open a whole wall, $12,000-$25,000 depending on span. This is where a header upgrade becomes a real cost, and where a permit is almost always required.
- Glass and screen choices: tempered glass is required near a door swing; low-E coatings cut summer heat gain; a sliding screen or retractable screen runs $300-$900 added.
What Sliding & Patio Doors Cost in Brentwood, CA
Sliding & patio door projects in Brentwood land between $4,500 and $15,000 for most single-opening replacements, with large multi-panel or structural jobs going above that. Here’s what’s inside the number.

| Line item | Typical range |
|---|---|
| Standard 6-foot slider, vinyl | $4,500-$8,000 |
| Aluminum thermal-break slider | $6,000-$11,000 |
| Wood-clad slider | $9,000-$15,000 |
| Multi-panel / pocket door | $12,000-$25,000 |
| Header or framing modification | $1,200-$4,000 |
| Screen or upgraded glass | $300-$900 |
Four things push a job to the high end: the size of the opening (a 12-foot span needs a bigger header and more glass), the condition behind the old door (rot, cracked stucco, or a failed sill pan), whether we’re cutting a new opening versus replacing one, and the material grade. Permits add a modest fee on structural changes. A written estimate lists the door model, glass package, header work, stucco patch, trim, screen, permit, and disposal. What it typically doesn’t include: interior painting beyond touch-up, and any rot we can’t see until the wall is open. We flag both before we start, so the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Brentwood Homes Specifically Do to This Job
Most of the sliding & patio doors we install in Brentwood go into 1990s-to-2020s stucco homes on former orchard land, and that build era shapes the work. These homes were framed when stucco was the default exterior, so every door replacement is also a stucco patch job, and the inland heat cracks that stucco faster than coastal cities do. The expansive clay under Brentwood shifts with the seasons, and we regularly see thresholds that have settled out of level, which shows up as a slider that drags or a sill that holds water. Out in the custom ranchettes on multi-acre lots, we’re often cutting a new opening on a wall that was never designed for one, which means a header and a permit. HOA review boards on the larger tracts want the door color and style approved before delivery, so that approval becomes a line in the schedule. And when a homeowner is opening up the back wall to the patio, they often pair this with Paver Driveways in Brentwood or a new patio pour, so the outdoor living space reads as one project rather than two. If the door is one piece of a larger exterior update, it’s worth looking at the wider Windows & Doors in Brentwood scope before you commit, since matching frames across the house saves on labor. We cover the whole of Brentwood, ZIP 94513 included, and we handle the stucco, framing, and trim in one crew so you’re not coordinating three trades. Homeowners often pair this with Fence Repair in Brentwood when the same wind and sun that cracked the stucco has taken a toll on the side yard too.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Sliding & Patio Doors in Brentwood
A straight replacement of an existing slider takes one to two days; cutting a new opening with a header and stucco work takes three to five days, plus a final inspection about a week later. Call (888) 419-3650 and we’ll give you a realistic schedule for your specific wall.
A like-for-like replacement in the same opening usually doesn’t require a permit; changing the size of the opening, adding a header, or cutting a new door into a wall does. We pull the permit and pass the inspection for you, so the structural work is signed off and documented.
Yes, in most cases. If the new door goes into the existing opening, no plumbing or structural change is needed, and the job stays at the low end of the range. Once you widen the opening or add panels, a header modification and a permit come into play.
Most single-opening replacements run $4,500 to $15,000, with multi-panel or structural jobs above that. The door material, opening size, and what we find behind the old unit are the biggest drivers. Call (888) 419-3650 for an exact quote – estimates are free.
Every install is covered by our 730-Day Done Right Promise, and the door itself carries the manufacturer’s warranty, which varies by brand and model. If something isn’t right, we make it right, and you’ll have it in writing.
Get a Free Sliding & Patio Doors Estimate in Brentwood
We’ll come out, measure the opening, check the header and sill, and hand you a written line-item estimate for your sliding & patio doors in Brentwood. No pressure and no surprise change orders. Call (888) 419-3650 for a free estimate – a live person answers, 24/7. You’ll know the door model, the schedule, the price, and what’s covered by the 730-Day Done Right Promise before you decide anything.
Written by the team at Groundwork Construction Co.