Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Concord, CA: What It Costs and How the Work Runs
Metal roofing in Concord, CA typically runs $15,000 – $40,000 for a full installation, with most single-story ranch homes landing in the low-to-middle part of that band. A straight re-roof over sound decking takes 3 to 6 working days; anything that involves new structural framing, a pitch correction, or a full tear-off of layered shingles pushes closer to two weeks. Call (888) 419-3650 and we’ll put a written line-item number in front of you before anything gets ordered.

How a Metal Roof Goes On: The Stage-by-Stage Sequence
Metal isn’t a shingle job with different material. The sequencing is stricter, the tolerances are tighter, and a couple of stages have no equivalent on an asphalt roof. Here’s what actually happens, in order.
Stage 1: Tear-off and deck inspection (1 – 2 days)
We strip the existing roof down to the sheathing, which on Concord’s 1950s and 60s tract homes is usually 1×6 or 1×8 skip sheathing rather than modern plywood. That matters. Skip sheathing needs a solid substrate laid over it before any underlayment goes down, or the panels will telegraph every gap within a season. You decide here whether we overlay or replace the decking outright.
Stage 2: Structural review and any framing corrections (half a day to 2 days)
Metal is lighter than tile but the fastening pattern concentrates load differently, and on shallow-pitch Concord roofs the panel runs often need purlins or a purlin/substrate system. If the inspection turns up a sagging rafter or a previous unpermitted addition tied into the roof plane, this is where it gets addressed. You approve any framing scope before we continue.
Stage 3: Underlayment and flashing (1 day)
High-temp synthetic underlayment goes down over the substrate, then the real work: valleys, penetrations, chimney and skylight flashing. This is the stage that decides whether the roof leaks in year two or year twenty, and it’s the stage cheap crews rush. On Concord’s hillside homes, we also detail the windward eave flashing more heavily, which we’ll get to below.
Stage 4: Panel installation (2 – 3 days)
Panels run up the slope, get fastened on the concealed-flange pattern, and get cut and fitted at hips, ridges, and transitions. You’ve already chosen panel profile and finish by now. Concealed fasteners are standard on standing seam; exposed-fastener panels go faster and cost less but the washers are the long-term wear point.
Stage 5: Ridge, trim, and final inspection (half a day)
Ridge caps, rake trim, eave closures, and the final walkthrough with the property owner. We photograph the flashing details before the trim goes on so you have a record of what’s underneath. Most Concord jobs complete in a single visit per stage; the roof is watertight at the end of each working day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
Metal roofing is a category, not a product. Four decisions drive both the look and the price:
- Panel profile. Standing seam (concealed fasteners, clean vertical lines, premium price) versus exposed-fastener ribbed panels (lower cost, faster install, visible screws that need checking every few years). On shallow-pitch Concord roofs, standing seam handles the low slope better.
- Base material. Galvalume steel is the workhorse: strong, priced reasonably, and holds finish well. Aluminum resists corrosion better in moisture-heavy microclimates but costs more. Copper is a lifetime material with a premium to match.
- Finish and color. Standard factory colors in a baked-on finish are the value play. Premium finishes and darker colors run higher, and dark colors absorb more heat, which matters on a Mount Diablo-facing slope.
- Panel width and seam height. Wider panels mean fewer seams and a cleaner look; taller seams perform better in wind uplift. On exposed ridge-top lots, we spec the taller seam.
If the project widens into gutters, fascia, or the wider envelope, that’s part of a full Roofing in Concord scope and we’ll price it together so nothing gets double-charged.

What Metal Roofing Costs in Concord, CA
Plan on $15,000 – $40,000 for metal roof installation here. That’s a wide band because five variables move it hard:
- Roof size and complexity. A simple gable ranch sits at the low end. Hips, valleys, dormers, and multiple roof planes add cutting, waste, and labor.
- Deck condition. Skip sheathing that needs a substrate overlay, or rotten sheathing that needs replacement, adds material and a day of labor.
- Material grade. Galvalume at the bottom, aluminum and copper climbing from there.
- Tear-off layers. One layer of shingles is routine. Three layers means more dumpsters, more disposal fees, and more time.
- Structural or pitch corrections. Framing repairs and pitch changes are the wildcard. We won’t quote them sight-unseen.
A written estimate from us lists tear-off, disposal, substrate, underlayment, flashing, panel material and gauge, trim, fasteners, labor, and the permit line separately. What it won’t quietly exclude: structural repairs found mid-job, skylight replacement if the existing units are past their life, and any HOA-mandated color upgrade. Those get flagged before we start, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Concord Homes Do to a Metal Roof Job
Concord sits where the cool, fog-influenced Diablo Valley floor meets the hot inland slopes of Mount Diablo, and that gradient changes the roof spec within a mile. West-side neighborhoods hold marine-layer moisture against the roof deck longer. Uphill lots toward the foothills take extreme summer heat and stronger wind exposure. We spec underlayment and wind detailing to the specific lot, not to a generic Concord average. The housing stock reinforces it: post-WWII and 1950s-70s single-story ranches dominate, many with original slab foundations and shallow-pitch roofs, and the older tracts regularly turn up 1950s-60s additions built without permits. Those unpermitted tie-ins can hide a roof plane that was never flashed correctly and pools water in the first big winter storm. Permits and inspections run through the city, and any structural correction or decking change gets inspected before panels go on. We work the 94519, 94522, 94524, and 94529 ZIPs and the surrounding Concord neighborhoods, and we handle the permit paperwork as part of the job.
Serving Concord, CA – Our Local Coverage Area
We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Metal Roofing in Concord
Most jobs run 3 to 6 working days, and larger or more complex roofs can stretch to about two weeks. Weather and any structural repairs found during tear-off are the main variables. Call (888) 419-3650 for a timeline tied to your specific roof.
Yes, a re-roof permit is required, and any structural or decking correction gets inspected before panels go down. We pull the permit and schedule the inspections as part of the job. Call us and we’ll walk you through what the city will want to see.
We don’t recommend it here. Concord’s older roofs often hide skip sheathing or previous unpermitted work that needs to be seen before a new roof goes on. A full tear-off costs more upfront but avoids surprises. Call (888) 419-3650 and we’ll assess your deck during the free estimate.
Metal roof installation typically runs $15,000 – $40,000, driven by roof size, deck condition, material grade, tear-off layers, and any structural corrections. Call (888) 419-3650 for an exact line-item quote. Estimates are free.
Workmanship is covered by our 730-Day Done Right Promise, and the panel manufacturer’s material warranty runs alongside it. If it’s not done right, we make it right. Call (888) 419-3650 to go over the coverage in writing before you sign anything.
Get a Free Metal Roofing Estimate in Concord
Call (888) 419-3650 for a free on-site estimate on metal roofing in Concord. We’ll measure the roof, check the deck and flashing, and hand you a written line-item number with the permit and the 730-Day Done Right Promise spelled out. Live person, 24/7. No surprises on the back end.
Written by the team at Groundwork Construction Co.