Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Livermore: What the Job Actually Involves
Paver driveways in Livermore typically cost $7,000 – $18,000 and take three to five working days from demolition to the final joint-sand pass. The work is a full rebuild, not a resurfacing: the old surface comes out, a compacted aggregate base goes in, pavers are set on a sand bed, and the edges are restrained and sealed. If you’re in 94550 or 94551 and want a fixed written number, call (888) 419-3650 and we’ll walk your driveway and quote it on site.

How a Paver Driveway Gets Built, Stage by Stage
Five stages, and you have a decision at each one. This is the order we work in, and it’s the order that keeps a driveway from settling two winters later.
Stage 1: Site visit and layout (day 1, roughly two hours)
We measure the actual drivable width, check slope for drainage, and locate the existing base. On older downtown Livermore properties, that often means digging a test hole to see whether there’s any structural base under the current surface or just dirt and old gravel. You decide the paver shape, color, and whether the driveway gets a border course. This is also where we confirm what’s buried: irrigation lines, gas runs to a detached shop, and the conduit for any exterior lighting.
Stage 2: Demolition and haul-off (day 1 to day 2)
Existing asphalt, concrete, or worn pavers come out, along with any failed base. On a typical two-car Livermore apron this runs 400 to 700 square feet of removal and one to three dumpster loads. You don’t have to be home for this. If a car has to move, we tell you the night before, not the morning of.
Stage 3: Excavation and base prep (day 2, the stage nobody sees)
We excavate to a depth that accommodates 4 to 6 inches of compacted Class II aggregate plus the sand setting bed, then compact in lifts. This stage gets graded away from the garage and toward a discharge point, which matters more than most homeowners expect. Newer east-side tract homes in Livermore often sit on graded lots where the natural fall was already established; older ranch properties sometimes have no positive drainage at all and need a regrade. You decide at this point whether to add a channel drain or a dry well, or leave it to surface flow.
Stage 4: Paver setting and restraint (day 3 to day 4)
Edge restraints go in first, then the sand bed, then the pavers, cut to fit at the garage apron and any curved edges. Setting 600 square feet of pavers is a full day with a two-person crew and a cut station. You’ll see the pattern take shape by end of day three and can flag any color-lot variation before the field is finished.
Stage 5: Cutting, compaction, sanding, sealing (day 5)
Final cuts at the edges, a plate compactor pass over the whole field, polymeric sand swept into the joints and watered in, then cleanup. Sealing is optional and usually scheduled for a return visit after the pavers have cured and the first rain has passed. Before we close out, we’ll walk the finished driveway with you.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for a Livermore Paver Driveway
Material choice drives both the look and the number. Three real decisions move a Livermore paver driveway’s price and longevity.
- Concrete vs. clay vs. tumbled pavers. Standard interlocking concrete pavers run roughly $8 to $14 per square foot installed for material and labor on a typical drive. Clay brick pavers cost more, weather beautifully in Livermore’s hot summers, and hold color for decades – but expect $14 to $22 per square foot. Tumbled or antiqued concrete pavers split the difference and hide scuffs well on a working driveway.
- Base thickness and compaction. A driveway that takes a 7,000-pound truck needs a thicker, better-compacted base than a walkway. We spec 4 inches minimum for standard driveways and 6 inches where heavy vehicles park. Skimping here is the single most common cause of settling and rutting. On the clay-heavy soil common around Livermore, a proper base plus a geotextile fabric layer keeps the pavers stable through wet winters.
- Drainage and edge detail. A border course, a channel drain at the garage apron, or a dry well on the low side. These add cost but solve water problems before they start. If your existing drive pools water against the garage door, this is the time to fix it.
You don’t have to choose all of this before we meet. Bring photos, a rough idea, or nothing at all – we’ll show you samples and price the options side by side so the trade-offs are visible.
What Paver Driveways Cost in Livermore, CA
Most Livermore paver driveways land between $7,000 and $18,000 for a two-car driveway of 400 to 700 square feet, installed with base, edge restraint, polymeric sand, and the paver pattern of your choice. Here’s what pushes a job to one end of that range or the other.

| Line item | Typical range |
|---|---|
| Paver material (concrete, mid-grade) | $3 – $7 / sq ft |
| Paver material (clay brick or premium) | $8 – $14 / sq ft |
| Base prep, compaction, and grading | $1,500 – $4,000 |
| Demolition and haul-off | $800 – $2,500 |
| Edge restraint and channel drain | $300 – $1,800 |
| Sealing (return visit) | $250 – $700 |
What moves the total: driveway size and shape (a curved or chamfered apron means more cuts and more waste), existing surface condition (asphalt mills out fast, old poured concrete with rebar takes longer), base depth where heavy vehicles park, paver grade, and whether a regrade is required to fix drainage. A written estimate from us lists each of these as separate line items, so you can see exactly where your money goes and choose to trim. Upfront pricing means the number on the signed estimate is the number you pay – no change orders once work starts. Bring in projects over $10,000 and you can take $1,000 off, and 0% financing for 18 months is available on the balance.
See the difference
Before
After
Before
After
Before
AfterWhat Livermore Homes Specifically Do to This Job
Livermore sits directly on the Greenville Fault, and that reality shapes how we build driveways here. Pavers themselves flex with minor ground movement far better than a poured slab, which is one reason they’re a smart choice for the older downtown ranches and Victorians in 94550 that sit on raised foundations and stepped-over foundation walls. But the base has to be built to move with the ground, not resist it, and the edge restraints have to hold. If your garage apron ties into an older slab that’s already cracked from the clay soils, we address the joint rather than paving over it.
The same clay-heavy soil that cracks Livermore foundations also makes base prep a bigger deal than it is on sandier ground: water has nowhere to drain fast in winter, so positive fall away from the garage and a proper discharge point are non-negotiable. On east-side tract homes in 94551 built in the 1970s through 1990s, we’re often matching a new paver field to an existing driveway grade set decades ago, and the typical fix is a slight regrade rather than a same-plane overlay. If you’re in the Livermore area and unsure where your drainage should go, that’s exactly the kind of thing we sort out on the walk-through. Homeowners often pair this with a larger yard rebuild – if your project is part of a full Driveway & Pavers in Livermore, that page covers the wider scope. We also do Driveway & Pavers across the region and regularly cover Livermore properties from the downtown core out to the eastern foothills.
One more local note: if your property is a rural or acreage lot with a detached shop or a driveway that doubles as turnaround space, the paver base and edge detail need to hold up to heavier traffic than a standard two-car drive. Homeowners often pair this with a shop or accessory structure build – our ADU Design & Permitting in Livermore and Garage Conversion ADU in Livermore work both involve paving and grading decisions that come up alongside the driveway.
Serving Livermore, CA – Our Local Coverage Area
We serve Livermore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Livermore
A standard two-car paver driveway takes three to five working days from demolition to final cleanup, weather permitting. Winter rain can add a day or more for base drying, so we schedule those jobs with a buffer. Call (888) 419-3650 for a firm schedule on your specific driveway.
Paver driveways that match their existing footprint and grade usually don’t require a permit. If you’re regrading, extending the driveway into the public right-of-way, or changing drainage that affects a neighboring property, the city will want a review. We sort out that question on the site visit and pull whatever inspections apply, so you’re not left chasing the building department.
Interlocking pavers are one of the most forgiving surfaces for ground movement – they flex and settle rather than cracking the way a monolithic slab does. The key is a properly compacted base and edge restraint. Built right, a paver driveway here handles clay expansion and minor seismic movement far better than concrete.
Most jobs run $7,000 – $18,000 depending on size, paver grade, and base conditions, with clay brick at the higher end. A written line-item estimate shows you exactly where the money goes. Call (888) 419-3650 – estimates are free and there’s no obligation.
Yes. Every paver driveway we build is covered by our 730-Day Done Right Promise – if something isn’t right, we come back and make it right, no fine print games. Verify the base and materials on the estimate before signing, and ask any contractor the same question.
Get a Free Paver Driveway Estimate in Livermore
Paver driveways in Livermore are a straightforward project once the base, drainage, and material grade are settled – and settling them is what the on-site estimate is for. Call (888) 419-3650 and we’ll set up a time to walk your property, measure the drivable area, and hand you a written price with every line item listed. A live person answers the phone, day or night.
Written by the team at Groundwork Construction Co.