Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Brentwood, CA: What It Costs and How Long It Takes
A wood fence in Brentwood typically runs $3,500 – $9,000 depending on linear footage, height, and whether we’re removing an old fence first, and most jobs are finished in 2 to 4 working days once materials land on site. That covers posts, rails, boards, and the gates. If you’re in a newer tract off Sand Creek Road or out on a multi-acre lot off Marsh Creek Road, the numbers land in different places, and we’ll explain why below. Call (888) 419-3650 and a live person answers, any hour.

The Build Sequence We Run, Start to Finish
Wood fencing is straightforward work done badly all the time. What separates a fence that’s straight in year ten from one leaning by year three is the sequence, not the lumber. Here’s exactly what we do and what you decide along the way.
Stage 1: Site Walk and Layout (Day 1, 1 – 2 Hours)
We walk the property line with you and flag every post location. This is where you make the decision that affects everything downstream: the exact fence line. In Brentwood, that often means agreeing on a line that respects grading and drainage easements your builder set up, or coordinating with a neighbor whose fence ties into yours. We mark the line with paint and stakes so you see it before anyone digs.
Stage 2: Demo and Utility Check (Day 1, 2 – 4 Hours)
If there’s an existing fence, it comes out now. Posts get pulled, not cut flush, because a buried post stub ruins the base of the next one. We call 811 for utility locate before digging and we hand-dig near irrigation lines, which Brentwood lots have in abundance. You decide whether old materials get hauled off or set aside for you.
Stage 3: Post Setting (Day 1 – 2, 3 – 5 Hours Active, 24+ Hours Cure)
Posts go in at 6 to 8 feet on center, set in concrete, and they cure overnight. We use pressure-treated posts rated for ground contact. On Brentwood’s expansive clay, the hole depth and concrete volume matter more than they would in sandy soil further west. You decide post depth if you want extra height or a wind screen on top.
Stage 4: Rails, Boards, and Height (Day 2 – 3, 4 – 6 Hours)
Rails go on, then the boards. You pick the board style and height before this stage, not during it. We set the dog-ear or flat-top profile, decide board-on-board versus side-by-side, and cut the top line to follow your grade or hold a step pattern. Each choice changes the look and the price.
Stage 5: Gates and Walk-Through (Day 3 – 4, 2 – 3 Hours)
Gates get hung, hardware gets set, and we walk the whole line with you. Latch alignment, gate sag, board spacing, and the warranty paperwork all get handled here. Most jobs finish in 2 to 4 working days total, weather permitting. Call (888) 419-3650 to schedule the walk-through estimate before any of this starts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Change Your Fence
Wood is not one product. The grade, the species, and the profile all shift both the look and the price. Here’s what you’ll be deciding between, and what each one really means.
- Cedar vs. pressure-treated pine: Cedar resists rot and insects naturally and holds stain well, and it costs roughly 20 – 35% more than pine. Pine is cheaper and takes stain, but it needs more upkeep in Brentwood’s dry heat. Cedar suits the stucco Mediterranean homes that dominate this market.
- Board-on-board vs. side-by-side: Board-on-board (dog-eared pickets overlapping) blocks sight lines and wind better. Side-by-side is cheaper and lighter but shows gaps.
- Height: 6 feet is the standard privacy height. Under 6 feet is often easier on HOA approval. Anything over 6 feet usually needs engineering and a permit.
- Post spacing: Standard is 8 feet on center. Going to 6 feet costs more in posts and concrete but holds up better against Brentwood’s persistent Delta winds.
- Finish: Clear stain shows the grain, solid stain lasts longer and hides checks, and unfinished cedar will gray out within a couple of seasons.
If the fence is part of a broader yard plan, our Fence Installation in Brentwood page covers the wider scope, and homeowners often pair a new fence with Paver Driveways in Brentwood to tie the front and back of the property together.
What Wood Fence Costs in Brentwood, CA
The typical Brentwood wood fence job lands between $3,500 and $9,000. That spread isn’t arbitrary – five variables move the number. Linear footage is the biggest: 100 feet of standard 6-foot cedar-and-pine sits near the low end, while 200+ feet pushes the high end. Existing fence removal adds $400 – $1,200 depending on length and how stuck the posts are. Board-on-board and extra-height add materials and labor. Post spacing at 6 feet on center adds roughly 10 – 15%. And if your property line runs along a slope or near a drainage easement, layout work adds time.

What’s included in a written estimate: posts, rails, boards, concrete, hardware, gate framing, cleanup, and haul-away of old material. What typically isn’t included: a surveyor, if one is needed to confirm the line; any utility relocation; and painting or staining beyond the base coat. We give you a line-item quote in writing up front, and we don’t come back asking for more mid-job. Free estimate, no-hassle pricing. Call (888) 419-3650.
If you’re also handling the hardscape while the fence is going up, we can fold that into a single quote through our Concrete Driveways & Concrete Work in Brentwood service, so you’re not managing two contractors.
See the difference
Before
After
Before
After
Before
AfterWhat Brentwood Homes Do to a Wood Fence Job
Brentwood’s housing stock is overwhelmingly new, and that shapes this work. The vast tracts of 1990s – 2020s Mediterranean stucco homes spread across the 94513 ZIP were built on former orchard land, which means we regularly find old furrow lines and buried irrigation pipe when we lay out a fence line. That’s before we even talk about the expansive clay soil underneath. In winter the clay swells and shoves posts sideways; by August it has shrunk and left gaps around every post base. We size post holes and concrete to account for that movement, because a fence that ignores it leans within a few seasons.
Permitting in Brentwood is stricter than in older Bay Area cities. Newer production neighborhoods and custom ranchettes both fall under grading and drainage rules that require fences to respect drainage easements and not block runoff. If your property sits in a newer HOA subdivision – and most of Brentwood’s recent build does – plan on getting HOA approval for height, material, and finish before we set posts. The Summer heat over 100°F is one reason we prefer to set posts in spring and fall, and the Delta winds that blow through here year-round are why 6-foot post spacing beats 8 in exposed lots. We work all of Brentwood, and you can see the service-area details on our Brentwood page.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Wood Fence in Brentwood
Most wood fence jobs in Brentwood take 2 to 4 working days, weather permitting. Demolition and layout happen on day one, posts cure overnight, and boards, gates, and cleanup fill the remaining days. Longer fences or fences with multiple gates push toward the 4-day end.
It depends on height and location. A standard 6-foot residential privacy fence often falls under your HOA’s rules rather than a city permit, but fences over 6 feet, fences along a drainage easement, or fences on a slope usually require permitting and possibly engineering. We tell you which category your job is in during the free estimate, and we handle the paperwork.
No. Our pricing is upfront and written. The quote you approve is the number you pay. The only way the number moves is if you change the scope yourself – adding footage, raising the height, or choosing a different material after the estimate.
Expect $3,500 – $9,000 for a typical residential wood fence in Brentwood, with linear footage, species, height, post spacing, and old-fence removal driving the difference. Call (888) 419-3650 for an exact quote – estimates are free and we give you a written line-item breakdown.
Every fence we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship on post setting, rail attachment, and gate hanging, not normal weathering of the wood itself. Our technicians have up to 12 years of experience on fence work, and they’re background-checked and arrive in uniform. Call (888) 419-3650 to get started.
Get a Free Wood Fence Estimate in Brentwood
Call (888) 419-3650 and a live person will pick up, day or night. Tell us your location and rough footage, and we’ll set a time to walk the property, mark the line, and hand you a written estimate with the footage, species, and gate count spelled out. No pressure, no sales pitch – just the number. You can also learn more about our fence installation service before you call.
Written by the team at Groundwork Construction Co.