Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tile Roofing in Antioch, CA: What It Takes and What It Costs
Tile roofing in Antioch usually means a full tear-off and re-roof priced between $8,000 and $20,000 for a standard single-story home, with tile repair on a localized problem running $600 to $2,500. A full tile installation takes most crews four to seven working days once the tear-off starts, plus inspection. Call (888) 419-3650 and we’ll walk your roof and put a line-item number in front of you.

How We Handle Tile Roofing in Antioch, Stage by Stage
Tile work rewards patience. The clay is heavy, the underlayment is what actually keeps water out, and rushing either one is how a five-figure job turns into a callback. Here’s the sequence we follow.
1. Roof inspection and deck assessment (day 1)
We start on the roof and in the attic. We’re checking the condition of the sheathing, the fascia, and whether the existing underlayment has failed at the valleys and penetrations. You’ll decide at this stage whether we replace sheathing boards that are soft or delaminated or patch only what’s failed. On Antioch homes from the 1960s and 1970s, we find soft decking more often than you’d expect.
2. Tear-off and deck repair (days 1 – 2)
The old tile comes off, then the old underlayment, then we inspect the bare deck. Rotted or cracked sheathing gets replaced, and any out-of-square conditions at the eaves get squared up before new material goes down. Roofing is loud and generates a lot of debris; we tarp the yard and run magnetic sweeps at the end of every day so nails don’t end up in the lawn.
3. Underlayment and flashing (days 2 – 3)
This is the part you’ll never see and the part that matters most. We install a high-temp self-adhered or synthetic underlayment, then new valley metal, drip edge, and step flashing at sidewalls and chimneys. You decide on underlayment grade here: a standard synthetic runs less, a premium self-adhered membrane costs more and delivers better performance at low-slope sections and around penetrations.
4. Tile installation (days 3 – 6)
Tile goes down from the eave up, with the field, hips, ridges, and valleys all set on the manufacturer’s specified layout. We cut tiles wet to control dust, and we set the ridge with a proper mortar mix so wind off the hills doesn’t get under the caps. You’ll want to be on site for the layout decision: do you want a straight-lap field, a random pattern, or a specific hip-and-ridge detail?
5. Final inspection and punch list (day 6 – 7)
We do a roof-top and ground-level walk with you, check the flashings, confirm the gutter lines are clear, and pull the permit inspection. The final sign-off requires the building inspector; the schedule depends on the county, not on us. If anything on your punch list isn’t right, our 730-Day Done Right Promise covers it, in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Tile Options You’ll Actually Choose Between
Tile isn’t one product. The decisions below are the ones that change the look and the budget the most.
- Clay barrel tile: The classic look, heavy at 8 – 12 pounds per square foot, and expensive. Best where the roof framing is already rated for it. Cracks under impact, so watch for fallen branches along hill properties.
- Concrete flat tile: The most common choice on Antioch homes. Lighter than clay, comes in more colors, and runs 25 – 40% less per square installed. Good match for mid-century tract homes that need a period-correct profile.
- Concrete barrel tile: Split the difference: the Mediterranean shape without clay’s price. This is what most homeowners in the newer hill developments choose.
- Synthetic tile: The lightest and quickest to install, with a lower structural demand on the framing. It looks convincing from the street and runs at the low end of tile pricing. Some buyers notice the difference up close.
- Underlayment grade: Standard synthetic vs. self-adhered high-temp membrane. The membrane adds a few hundred to a couple of thousand depending on roof size and matters on the low-slope and valley sections where Antioch roofs tend to leak first.
- Color and finish: Standard matte finishes are cheaper; some manufacturers offer premium through-color or glazed finishes. Not a big price difference per square, but it’s a decision you commit to for 30 years.
If you’re working through your whole exterior at once, most Antioch homeowners pair this with Energy-Efficient Windows in Antioch, since a new roof and new windows hit the same inspection window and share the scaffolding.

What Tile Roofing Costs in Antioch, CA
Tile roof repair runs $600 – $2,500 depending on the scope; a full tile roof installation or replacement sits in the $8,000 – $20,000 range for a typical single-story home, and higher for a two-story with complicated geometry or premium clay. Where does a job land in that range? Five variables.
- Roof size and pitch: A steep pitch means slower, more careful work and more safety equipment. A small flat ranch runs near the low end; a two-story with steep hips and dormers climbs.
- Existing condition: Soft or rotted sheathing, failed flashing, or a sub-standard prior installation all add demo and repair time. Original 1950s – 1970s decking is often thinner than today’s standard.
- Material grade: Concrete flat tile at the low end, clay barrel at the top. The material itself is usually 30 – 50% of a full project.
- Permit and inspection scope: A standard re-roof permit is one thing; if a swap from composite to tile adds structural work, the inspection scope grows and so does the price.
- Flashing and penetrations: A simple rectangular roof with two vents is fast. A roof with skylights, chimneys, and multiple valleys is where the labor time accumulates.
A written estimate from us breaks these out so you see the sheathing, the material line, and the labor line separately. The number you see on that page is the number you pay: no change orders once work starts unless you approve the change in writing.
See the difference
Before
After
Before
After
Before
AfterWhat Antioch Homes Specifically Do to Tile Roofing
Antioch sits on the Delta at the foot of the East Bay hills, and that geography shows up on the roof. The flats downtown and along the water are dominated by 1950s – 1970s ranch homes, many still running original thin decking; the summer Delta winds off the river drive fine dust into the valleys and packs it against the underlayment, and the cool, fog-influenced winters cycle the clay soils below the footing. Tile roofs here fail at the flashing and in the valleys before the tile itself goes bad. In the southern hills subdivisions from the 1980s through 2000s, the decking is in better shape and we’re typically swapping tile and underlayment rather than repairing structure. On the newer hill-fronting streets, wind-driven dust and fast-drying conditions mean we plan mortar and flashing work around morning hours. That’s the practical reality of tile roofing in Antioch, and it’s why we don’t quote from a spreadsheet; we walk the roof.
Serving Antioch, CA – Our Local Coverage Area
We serve Antioch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tile Roofing in Antioch
A typical full tile re-roof takes four to seven working days, plus the county building inspection, which usually adds one to three days on the schedule. Two-story or steep-pitch jobs run longer. Call (888) 419-3650 for a scope-based estimate.
Yes. A full tile roof replacement requires a building permit and inspection in Antioch, and the inspection covers the deck, underlayment, and sheathing. A small localized repair that replaces a dozen cracked tiles doesn’t require a permit. We pull the permit, so you’re not doing it.
We don’t recommend a tile-over on an existing roof in Antioch, because the long-term failure mode is almost always the underlayment, not the tile. Tearing off the old tile and underlayment is the only way to inspect and repair the deck and get a fresh membrane. It also keeps the roof within safe structural load limits.
Tile repair in Antioch runs $600 – $2,500 for typical jobs, from a dozen replacement tiles up to a full valley reflash. A full replacement runs $8,000 – $20,000. Call (888) 419-3650 for a line-item estimate; it’s free.
Every tile roofing job we do is backed by our 730-Day Done Right Promise on our workmanship, and by the manufacturer’s material warranty on the tile and underlayment. If a leak appears in that window and it traces to our installation, we make it right. The written terms go on the estimate, not the fine print.
Get a Tile Roofing Estimate in Antioch
If you’re pricing out tile roofing in Antioch, start with a free on-site estimate. We walk the roof, measure, photograph, and hand you a written line-item quote. When you call (888) 419-3650, a person picks up, day or night. We’re part of your wider roofing and remodeling picture in Antioch, and you can also see how our Roofing in Antioch page covers the larger scope, our roofing service generally, and the impact of Impact Windows & Doors in Antioch if you’re doing a full exterior envelope at once.
Written by the team at Groundwork Construction Co.