Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Blackhawk, CA: What It Costs and How It Goes
Vanities, tile and fixtures work in Blackhawk typically runs $9,000 – $28,000 for a full bathroom’s worth of vanity, floor and wall tile, and fixture replacement, with most jobs finishing in two to three weeks once HOA design review is complete. The wide spread comes down to tile square footage, whether plumbing moves, and stone grade. Call (888) 419-3650 and we’ll walk you through what your Blackhawk bathroom actually needs.

How we run a vanity, tile and fixture job, stage by stage
Every Blackhawk job follows the same sequence. The order matters more than most homeowners expect, because tile layout decisions you make on day one determine what the vanity can look like two weeks later.
Stage 1: Layout and selection lock (1 – 2 weeks before demo)
We measure the room, confirm the vanity cabinet footprint against the existing plumbing wall, and settle the tile layout – where a full tile starts, how the cuts fall at the door threshold and the tub edge. This is when you choose vanity style and finish, countertop material, tile format, and fixture finish. Our kitchen and bath brand partners include KraftMaid and Kohler, and we’ll bring samples to the house so you’re choosing against your actual light, not a showroom’s.
Stage 2: Demo and waterproofing prep (2 – 3 days)
We pull the old vanity, fixtures and tile down to the substrate. On Blackhawk homes from the ’80s and ’90s, that often means discovering a fiberglass or drywall backer behind the old tub surround, which has to come out and be replaced with cement backer board or a bonded waterproofing membrane. Floor tile comes up to the subfloor. If anything structural or plumbing-related turns up, this is when we show it to you, and this is when a written change order gets signed before the number moves.
Stage 3: Rough-in and inspection (1 – 2 days, then permit timeline)
If the vanity is relocating, the drain and supply lines move, and the vanity’s GFCI outlet gets added or shifted. That work triggers a permit and an inspection before tile goes back down. If nothing moves, we skip this stage entirely and save you both time and the permit fee.
Stage 4: Tile setting and grouting (4 – 6 days)
Wall tile in a shower or tub surround runs first, then floor tile, then grout and seal. Large-format tile moves faster than a small mosaic, but a herringbone or offset pattern adds a day. Grout cure takes 24 hours before the room gets wet.
Stage 5: Vanity set, fixtures, punch (2 – 3 days)
The vanity cabinet gets leveled and shimmed, the countertop template goes out if it’s stone, and the sink, faucet, mirror, lighting and towel bars land in one push. We walk the room with you, check every grout line and every fixture for function, and hand over care instructions. The 730-Day Done Right Promise covers the workmanship for two full years, and if something isn’t right, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Four decisions drive most of the budget and most of the long-term satisfaction on this job. Here’s the honest trade-off on each.
- Vanity cabinet – stock versus semi-custom. Stock cabinets hold the low end and get installed in a day. Semi-custom gets you the exact width for an awkward Blackhawk alcove and a furniture-grade finish, for roughly 30 – 50% more. Given how many of these homes have non-standard footprints, semi-custom is often the practical choice.
- Countertop – quartz versus natural stone. Quartz resists staining and needs no sealing, which suits a busy household. Marble and granite look richer but require sealing and can etch. Cambria quartz is a strong middle ground on cost and durability.
- Tile – porcelain versus ceramic versus natural stone. Porcelain takes the wear and is the sensible floor choice. Ceramic costs less but chips more readily. Marble and travertine on a bathroom floor look spectacular and need sealing twice a year; many Blackhawk homeowners use stone on the vanity wall or shower back and porcelain on the floor to balance cost and upkeep.
- Fixtures and finish. Kohler and similar brands offer entry, mid, and premium tiers in the same faucet line. Brushed nickel and matte black are the finishes people ask for most. Trim and valve quality matter more than finish – a cheap cartridge fails long before the finish wears.
What Vanities, Tile & Fixtures costs in Blackhawk, CA
Expect $9,000 – $28,000 for a full bathroom’s worth of vanity, tile and fixture work. A simpler pass – vanity replacement, floor tile, new faucet and shower trim with nothing relocating – typically lands closer to $9,000 – $14,000. A full-gut room with stone shower walls, a relocated vanity, and premium fixtures lands at the top of the range.

The variables that move it:
- Tile square footage and format. A small-format mosaic costs more in labor per square foot than a 12×24 porcelain.
- Plumbing and electrical relocation. Moving the vanity drain or adding a circuit adds cost and a permit.
- Existing condition. Water-damaged backer or a failing shower pan means new waterproofing underneath, which isn’t visible until demo.
- Material grade. Stone counters and natural stone tile sit at the top; quartz and porcelain sit in the middle.
- HOA design review. Blackhawk’s architectural review can extend the timeline. It doesn’t usually add to the build cost, but it does move the calendar.
Every written estimate breaks out material, labor, and permit line by line. The number you see is the number you pay, unless you approve a written change order. 0% financing for 18 months and $1,000 off projects over $10,000 are both standing offers on this job.
See the difference
Before
After
Before
After
Before
AfterWhat Blackhawk homes specifically do to this job
Blackhawk is a gated, master-planned community in ZIP 94506, and work here runs through HOA architectural review before a permit gets pulled. That applies even to a vanity, tile and fixture job when anything visible from outside changes – a window, a vent, an exterior fixture. Most of what we do inside the house doesn’t trigger exterior review, but we confirm before demo. Gated access means we schedule crew arrival and material deliveries around the gate, and we plan the dumpster and material drop the same way. The homes we work on most are 1980s – 2000s custom and semi-custom estates with multi-level floor plans, so a guest bath off the main hall and a primary bath upstairs often get sequenced together. Fixture failures on these homes are common – the original shower valves and toilet supply lines are 25 to 40 years old and starting to fail at the cartridges. If this work is part of a larger scope, it usually sits inside a Bathroom Remodeling in Blackhawk plan, and we cover the whole of Blackhawk, including the areas near the Blackhawk Country Club and the neighborhoods just off Camino Tassajara.
Serving Blackhawk, CA – Our Local Coverage Area
We serve Blackhawk and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Vanities, Tile & Fixtures in Blackhawk
Two to three weeks of active work for a full bathroom’s worth of tile, vanity and fixtures, plus one to two weeks of HOA review beforehand if the work touches anything visible from outside. Call (888) 419-3650 for a schedule specific to your room.
Only if plumbing or electrical lines move. Cosmetic replacement – new tile over existing backer, a vanity swapped in place, new fixtures at the same supply points – typically doesn’t require a permit in this area. If anything relocates, we pull the permit and pass the inspection. Call (888) 419-3650 and we’ll tell you which side of that line your job falls on.
Yes, and most of our Blackhawk clients do. A same-footprint vanity, new tile, and new fixtures don’t require plumbing relocation, which keeps the price at the lower end and skips the permit. The trade-off is that you keep the existing drain location, which limits where the vanity can sit.
$9,000 – $28,000 for a full bathroom, and $9,000 – $14,000 for a straightforward vanity-and-tile pass without relocations. Stone counters and large stone tile push toward the top; quartz and porcelain keep it lower. Call (888) 419-3650 for an exact quote – estimates are free.
The 730-Day Done Right Promise covers workmanship for two full years, and the fixture and cabinet manufacturers carry their own product warranties on top of that. If a grout line cracks or a valve fails, we come back and fix it.
Get a free estimate for vanities, tile and fixtures in Blackhawk
Call (888) 419-3650 and we’ll set up a free on-site estimate. We measure the room, look at what’s behind the old tile, and give you a written line-item price with materials, labor and any HOA or permit considerations spelled out. Calls get answered by a live person 24/7, and our technicians have up to 12 years of experience. Financing and the $1,000 project discount apply where they fit.
Written by the team at Groundwork Construction Co.