Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Danville, CA
Vanities, tile & fixtures work in Danville usually runs $9,000 – $28,000 and takes 2 – 4 weeks once materials are on site. That covers demolition, new vanity and countertop, floor and shower tile, and the faucets, trim and fixtures that finish the room. Someone who wants a primary bath that feels new without moving a wall should call (888) 419-3650 to set up a free on-site estimate. We look at the room, walk the choices with you, and write a line-item number before anything gets ordered.

How we take a Danville bathroom from demo to finished fixtures
Vanities, tile & fixtures jobs go sideways when the schedule is loose. Ours isn’t. Here’s the honest sequence, and where your decisions land.
- Day 1 – demo and protection. We pull the old vanity, mirror, toilet and flooring, tent the doorways, and haul it off. Expect one to two days. The decisions here are already made; this is where we confirm shutoff locations and whether the subfloor is solid.
- Days 2 – 3 – rough-in and inspection. If any plumbing or electrical is moving for the new vanity or towel warmers, this is when it happens. In much of Danville, moving a supply line or adding a circuit means a permit and an inspection, and we build that stop into the calendar rather than discovering it later. You decide now, not later, whether to relocate the vanity or leave it plumbed where it is.
- Days 3 – 6 – prep and waterproofing. Cement board, a bonded waterproofing membrane in the wet areas, and flat, level subfloor. A floor that flexes will crack tile and grout no matter how good the tile is. We check level before a single tile is set.
- Days 6 – 12 – tile. Floor set first, then walls, then the shower if there is one. Large-format porcelain goes down faster than a small mosaic; herringbone or a stone slab wall takes longer and costs more in labor. You pick the pattern and the grout color before this stage, not during it.
- Days 12 – 18 – vanity, countertop, fixtures, paint, punch list. Vanity set and leveled, countertop templated and installed, faucets and trim hung, then a walkthrough where we fix what you point at. That last list matters, and our 730-Day Done Right Promise is what stands behind it.
Our technicians have up to 12 years of experience on this kind of work, and most of these rooms get finished in a single trade visit once materials arrive. We call before we come and we answer the phone when you call back.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that actually shape the budget and the result
Most of the difference between a good bathroom and a great one is decided at the selection table. Here’s what to weigh.
- Vanity construction: painted MDF or plywood box with a solid wood door versus a fully wood cabinet with soft-close hardware. Plywood and solid wood hold up better to steam and last longer; budget lines can swell at the door edges over time. Brands like KraftMaid and Kohler are worth seeing in person before you commit, and they’re what we stock the spec sheet with.
- Countertop: quartz (Cambria is a common pick) is dense, non-porous and forgiving; natural stone looks richer but wants sealing; a cultured marble top is the cheaper route and shows scratches sooner.
- Floor tile: porcelain is the workhorse, low water absorption, plenty of finishes. Large-format panels mean fewer grout lines and less to clean. Natural stone (travertine, slate) looks superb in a California ranch bath but needs a membrane and a sealer.
- Shower and wall tile: a full tile shower with a linear drain costs more than a pan and surrounds, but it’s the one that lasts. Mosaic floors grip better underfoot.
- Fixtures: faucets, shower trim, towel bars, mirrors and lighting. This is where style and budget meet. A brushed nickel or matte black package runs the range from builder-grade to designer, and the difference in feel is real.
- Grout and waterproofing: epoxy grout resists staining and mold better than cement grout, at a modest upcharge. Don’t skip the membrane to save a few hundred dollars.
What Vanities, Tile & Fixtures costs in Danville, CA
Expect $9,000 – $28,000 for the typical Danville job, with most landing in the middle of that range. A single-vanity refresh with standard porcelain and stock fixtures sits near the low end; a larger room with a custom vanity, stone counter, big-format tile and a tiled shower pushes toward the top.
What moves the number:
| Variable | Effect on price |
|---|---|
| Room size and tile area | Bigger floors and walls add material and labor; a small bath stays near $9K |
| Moving plumbing or electrical | Relocating a vanity or adding a circuit adds permit and trade cost |
| Material grade | Porcelain versus stone, stock versus custom vanity can swing several thousand dollars |
| Pattern and layout | Herringbone, mosaics and slab walls take longer to set |
| Permit scope | Plumbing, electrical or structural changes require permits; tile and fixture swaps often don’t |
A written estimate from us is line-item, so you see the tile allowance, the vanity, the counter, the fixtures and the labor separately. What’s not in the base number: unforeseen rot or subfloor damage, upgrades you choose after the contract, and any structural or plumbing relocation you decide on later. We price those before work starts, not after.

See the difference
Before
After
Before
After
Before
AfterWhat Danville homes specifically do to this job
Danville is a built-out, high-value Tri-Valley suburb, and almost all of this work happens on existing lots in homes people intend to keep. In the 94526 core, we’re usually in 1960s – 1990s California ranch and Mediterranean houses, and the tile and vanity have to tie into mature stucco, older framing and existing trim profiles. In the hillside 94506 side around Blackhawk and Tassajara, fire-zone construction and defensible-space requirements shape what materials and methods get approved, and the intense inland summer sun takes a toll on exterior finishes and anything baked next to a west-facing window. Both halves of town mean shows like ours mix in with neighboring cities Blackhawk, Alamo and Walnut Creek. Homeowners often pair a bathroom refresh with Tile Roofing in Danville or Specialty Roofing in Danville when the house is getting exterior work at the same time, and we handle both.
Serving Danville, CA – Our Local Coverage Area
We serve Danville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Vanities, Tile & Fixtures in Danville
Two to four weeks from demo to walkthrough, with the tile stage taking the most days. Lead times on custom vanities and stone counters add to that before the first day on site. Call (888) 419-3650 for a timeline based on your room.
Not usually for tile, vanity or fixture replacement, but you do need one when plumbing, electrical or structural work moves. We pull permits and pass inspections as part of the job when they’re required. Call (888) 419-3650 and we’ll tell you straight whether your scope needs one.
Yes, and that’s how most of these jobs go. Keeping the vanity and fixtures in place avoids permits and trade delays and keeps the cost closer to $9,000. Moving a drain or adding a circuit is a bigger project. Call (888) 419-3650 for a free estimate.
Usually $9,000 – $28,000 depending on room size, materials and whether plumbing moves. A vanity replacement alone is $800 – $3,000; a walk-in shower installation is $4,500 – $12,000. Call (888) 419-3650 for an exact line-item quote, free of charge.
Our 730-Day Done Right Promise covers the workmanship for two years; if it isn’t right, we make it right. Material warranties come from the manufacturer, and we walk you through them at handoff. Call (888) 419-3650 to get started.
Schedule a free vanities, tile & fixtures estimate in Danville
Call (888) 419-3650 for a free on-site estimate on your Danville bathroom. We’ll walk the room, talk through vanity, tile and fixture options, and leave you with a line-item price and a realistic timeline. No pressure, no surprise numbers, and a live person answers the phone whenever you call. If you’d rather start with the wider scope, see our Bathroom Remodeling in Danville page or our Bathroom Remodeling service. We cover Danville and the neighboring towns with the same approach.
Written by the team at Groundwork Construction Co.