Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Discovery Bay, CA: What It Costs and How Long It Takes
Replacing a vanity, retiling a floor or shower surround, and swapping out faucets, mirrors and lighting in a Discovery Bay bathroom usually runs $9,000 – $28,000 for a full scope, and most jobs land in the $12,000 – $18,000 range. A vanity-only swap is much smaller, at $800 – $3,000. Figure two to four weeks on site once materials are in hand. Call (888) 419-3650 and we’ll price your exact bathroom, not a ballpark.

How our vanities, tile & fixtures work runs, stage by stage
Every job moves in the same order, and the order matters. Skipping a step here is what produces cracked tile in year three and a vanity that pulls away from the wall in year five.
Stage 1: Tear-out and substrate inspection (days 1 – 3)
We pull the old vanity, tile, and fixtures and get down to the framing and subfloor. This is where we find out what the last remodel hid. In Discovery Bay’s 1980s – 2000s homes we regularly uncover moisture damage around the shower valve and soft spots in the subfloor near the toilet flange. You’ll see photos of anything we find before we add a line to the estimate.
Stage 2: Rough-in changes (days 3 – 5)
If you’re moving the vanity to a different wall or adding a second sink, the plumbing and electrical rough-in happens now, and an inspection follows if the scope requires one. If you’re keeping the layout, we skip most of this and save you both money and a week. This is your decision point: keep the footprint or open it up.
Stage 3: Backer board, waterproofing and tile layout (days 5 – 9)
We set cement or foam backer board, apply the waterproofing membrane, and dry-fit the tile layout. You approve the layout and grout color before anything gets permanently set. Floor tile here goes down over a properly prepared subfloor; we check deflection first, because a bouncy floor will crack porcelain no matter how good the thinset is.
Stage 4: Tile setting, grout and sealing (days 9 – 13)
Wall and floor tile goes in, then grout, then sealer once the grout cures. Large-format tile takes longer because the cuts are less forgiving and the substrate has to be flatter. Mosaic or penny tile takes longer on labor for the opposite reason.
Stage 5: Vanity set, fixtures, mirrors and punch list (days 13 – 18)
The vanity gets set and shimmed level, the top and sinks go on, and we install the faucets, shower trim, toilet, mirror, and lighting. We test every drain and supply line, run the water, and walk the job with you before we call it done. Anything on the punch list gets fixed before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
- Vanity construction: Stock cabinets at the low end run quick and cheap but come in fixed sizes. Semi-custom and custom vanities (we install KraftMaid and similar lines) let you fit the exact wall and pick the door style, and they hold up better in a bathroom’s humidity.
- Vanity top: Cultured marble is the budget pick and resists staining well. Quartz and Cambria-style surfaces cost more but handle daily use without etching. Granite is durable and heavy; it needs a solid cabinet underneath.
- Tile material: Porcelain is the workhorse: dense, water-resistant, and available in large formats. Natural stone (travertine, marble) looks the part but needs sealing and shows water spots. Ceramic is cheapest and fine on walls.
- Grout and sealer: Epoxy grout costs more up front but resists staining and doesn’t need resealing. Cement grout with a quality sealer is cheaper and needs a refresh every few years.
- Fixtures: Kohler and similar brands cost more than builder-grade but hold finish and parts availability longer. Cheap faucets are the most common thing we replace twice.
- Tile size: Large-format (12×24 or bigger) means fewer grout lines to clean but demands a flatter substrate. Smaller tile hides floor imperfections and costs more in labor.
What vanities, tile & fixtures costs in Discovery Bay, CA
A full bathroom’s worth of vanities, tile, and fixtures lands between $9,000 and $28,000 in Discovery Bay, with most jobs we quote sitting in the middle of that band. A vanity-only replacement runs $800 – $3,000. Five things push a job toward the top of the range:
- Size of the bathroom. A hall bath is a fraction of the tile and material of a primary bath with a large shower and dual vanity.
- Condition behind the walls. Rot, old galvanized plumbing, or a failed shower pan turns a finish job into a repair job.
- Moving plumbing or electrical. Relocating a drain or adding a circuit means rough-in, inspection, and more labor days.
- Material grade. Stock vanity and ceramic versus custom cabinetry and natural stone is a several-thousand-dollar spread.
- Permit scope. Finish-only swaps often don’t trigger one; plumbing relocation or structural changes will.
A written estimate from us is line-item: tile, vanity, fixtures, labor, demo, and disposal each broken out, with no change-order surprises. What typically isn’t included is the cost of hidden damage until we open the wall, and any specialty glass or custom fabrication with long lead times.

See the difference
Before
After
Before
After
Before
AfterWhat Discovery Bay homes specifically do to this job
Discovery Bay is waterfront construction, and that changes a bathroom job in ways it doesn’t inland. Many homes here sit on man-made canals and levee-backed lots built over Delta peat and fill, and that ground moves. It shows up in bathrooms as out-of-level floors, sticking doors, and hairline cracks in tile that a homeowner assumes is a tile problem but is really a floor-movement problem. We check floor flatness and framing before we ever set tile, because laying porcelain over a shifting subfloor is how you get cracks in year two.
The housing stock tells the rest of the story. Most of what we work on in Discovery Bay is 1980s – 2000s custom and semi-custom homes, many Mediterranean stucco with tile roofs, plus waterfront homes with private docks and elevated decks. Plumbing and fixtures from that era are at the end of their service life, and the original shower valves and builder-grade faucets are the first things to fail. Hot Delta summers and strong breezes are hard on exterior finishes, but inside, it’s the humidity off the canal and the settling that do the damage. When we’re pricing a waterfront bathroom, we account for the water table and for how tight a rear-yard or canal-side work area can get. If the project expands past the bathroom, that’s part of a full Bathroom Remodeling in Discovery Bay, and homeowners often pair exterior work with Tile Roofing in Discovery Bay or Specialty Roofing in Discovery Bay while we’re already set up on site. Our bathroom remodeling service covers the wider scope, and we handle Discovery Bay and the surrounding Delta communities.
Serving Discovery Bay, CA – Our Local Coverage Area
We serve Discovery Bay and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Vanities, Tile & Fixtures in Discovery Bay
Most run two to four weeks on site, with vanity-only swaps finished in one to three days. Lead time on custom vanities and specialty tile adds a few weeks before we start. Call (888) 419-3650 for a timeline tied to your bathroom.
Finish-only tile and vanity replacements generally don’t require a permit, but relocating plumbing, adding electrical circuits, or changing structure does. We pull the permits when the scope needs them and schedule the inspections. Call (888) 419-3650 and we’ll tell you which category your job falls into.
Yes, and keeping the existing layout is the cheapest way to do this job. Same footprint means no rough-in, no inspection delay, and a faster schedule. Moving a drain or supply line is what pushes the cost up. Call (888) 419-3650 to talk through whether your layout can stay put.
A full bathroom’s worth runs $9,000 – $28,000, and a vanity-only replacement is $800 – $3,000. Size, condition behind the walls, plumbing changes, and material grade are what move the number. Call (888) 419-3650 for an exact quote; estimates are free.
Every project we do is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers our workmanship, and manufacturer warranties cover the vanity, tile, and fixtures themselves. Call (888) 419-3650 with any warranty question.
Get a free estimate on vanities, tile & fixtures in Discovery Bay
Call (888) 419-3650 and a live person picks up, any hour. We’ll ask about your bathroom, your timeline, and what you want to change, then set a free on-site estimate and design consult. You’ll get an upfront, line-item number in writing and a schedule with real dates. No pressure, no guesswork, and a guarantee that lasts past the day the last tile is set.
Written by the team at Groundwork Construction Co.