Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Oakley, CA: What It Costs and What the Job Really Entails
Vanities, tile and fixtures work in Oakley typically runs $9,000 – $28,000 and takes two to four weeks of active build time, depending on how much plumbing, electrical and wall tile is moving. That range covers demo of the old vanity and floor, new substrate and waterproofing, tile setting, vanity and countertop install, and hanging the fixtures. Call (888) 419-3650 for a free on-site estimate with line-item pricing.

How We Run a Vanity, Tile and Fixture Job in Oakley
The sequence matters more than the material list. Here’s how the stages actually go on an Oakley job.
Stage 1 – Tear-out and inspection (1 to 2 days)
We pull the old vanity, mirror, toilet and floor tile, then cut back drywall where the new tile field will land. This is the honest-discovery day. On Oakley’s 1990s-2000s tract homes, we regularly find the water supply stubbed at a height that won’t work for a new vanity, or subfloor that’s been softened by a slow valve leak. You decide tile size and layout before this stage so the tear-out reflects the new footprint, not the old one.
Stage 2 – Rough-in adjustments (1 to 2 days)
Plumbing gets repositioned for the new vanity width and faucet spread. A standard 60-inch vanity needs the drain roughly centered; a 48-inch freestanding unit often needs the stub moved. Electrical gets sorted for vanity lighting and GFCI outlet placement. Your decisions here: sink type (undermount vs. vessel), faucet spread, and whether you’re adding a second outlet. Moving plumbing inside this same wall is a small cost; moving it to a new wall is a bigger one.
Stage 3 – Substrate prep and waterproofing (1 to 2 days)
Cement board on the walls, a mortar bed or uncoupling membrane on the floor, and a bonded waterproofing coat inside any wet area. This is the day most of the value lives. Drying time adds a day before tile begins. Nothing to decide here except confirming the tile layout so cuts fall where you expect.
Stage 4 – Tile setting and grout (3 to 5 days)
Floor and wall tile go down in that order. Grout cures a full 24 hours before any fixture touches the wall. You’ve already picked the tile, but trim pieces (bullnose, schluter, edge profile) are decided at layout time – not after.
Stage 5 – Vanity, countertop and fixture install (1 to 3 days)
Vanity cabinet sets and gets shimmed level on the floor tile, the top goes on, then the faucet, drain, mirror, lighting and any accessories. Final walkthrough is the same visit. Expect a two-week job on straightforward work and three to four weeks if you’re rebuilding the shower at the same time – that’s a bigger scope you’d want to price alongside our Bathroom Remodeling in Oakley.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Vanity, Tile and Fixture Choices You’ll Actually Make
These are the decisions buyers sit with the longest, because they’re the ones you’ll live with daily.
- Vanity cabinet construction – Plywood boxes hold up to humidity; particleboard is cheaper and swells. KraftMaid and similar cabinet lines offer both at different price tiers. Floating vanities look clean but require blocking in the wall, which adds a day to the rough-in stage.
- Countertop material – Quartz (Cambria or comparable) resists water and staining without sealing; natural stone needs periodic sealing; laminate is the budget answer and works fine for a hall bath.
- Floor tile – Porcelain is denser, harder to chip and handles moisture; ceramic costs less but chips easier. Large-format plank tile (12×24 or 6×36) cuts grout lines and reads like wood, but requires a flatter floor; small mosaics are more forgiving of a slightly uneven slab.
- Wall tile and trim – Full height tile looks more finished but doubles material cost. A five-foot wainscot with drywall above is a solid middle ground.
- Fixtures – Kohler, Moen and Delta all make solid mid-tier lines. Widespread faucets look better than centerset; a polished chrome finish is more forgiving than polished nickel against water spots and hard water deposits.
What Vanities, Tile & Fixtures Cost in Oakley, CA
Full-scope vanity, tile and fixture work runs $9,000 – $28,000 in Oakley. Most projects sit between $14,000 and $19,000. Five things push the number:

- Vanity size and construction. A 36-inch stock cabinet with a laminate top sits near the low end; a 60-inch plywood cabinet with a quartz top and undermount sink lands higher.
- Tile square footage and layout. Standard 12×12 floor tile runs less per square foot than large-format plank or a herringbone pattern. Wall tile to the ceiling adds real material and labor.
- Plumbing and electrical relocations. Reusing the existing drain location is the cheapest version. A vanity widened beyond the original footprint usually needs a stub move.
- Waterproofing and substrate condition. Soft subfloor from a slow leak means replacing plywood before tile goes down.
- Permit scope. Straight swap of a vanity and floor tile usually doesn’t require a permit; relocating plumbing or electrical inside a wall does.
A written estimate from us breaks out demo, prep, tile material, cabinet, top, plumbing allowance, electrical allowance and fixtures in separate lines. It doesn’t include the tile itself if you’re buying it, or any drywall repair outside the immediate work zone.
See the difference
Before
After
Before
After
Before
AfterWhat Oakley Homes Do to This Job
The housing stock drives it. Oakley’s newer subdivisions along the Highway 4 corridor and the older ranch homes near Main Street are two very different jobs. The tract homes tend to have slab-on-grade foundations on expansive clay that used to be Delta farmland – when that slab settles, floor tile cracks before anything else does, so we check the floor for flatness before setting anything wide. Lot grading matters too: in the winter rains, an ungraded slope pushes water toward the house and softens the subfloor under the vanity. Older ranch homes near Main Street often have smaller footprints and original galvanized supply lines, which means a fixture swap can unearth a bigger plumbing project. Whether you’re replacing tile or tackling the whole thing with our bathroom remodeling team, we plan the job around what Oakley’s build era actually hands us.
Serving Oakley, CA – Our Local Coverage Area
We serve Oakley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Oakley
Two to four weeks of active build time for a full vanity and floor tile job, not counting the week or two before that where you’re picking materials. Call (888) 419-3650 for a scheduling window.
A cosmetic swap – new vanity on the existing plumbing, new floor tile – usually doesn’t require a permit. Relocating plumbing or electrical inside a wall almost always does. We pull the permits and schedule the inspections on any scope that needs them.
Yes. If the new vanity fits the existing drain location, the job stays cosmetic and the cost sits closer to $9,000. Widening past the original footprint usually forces a stub move and adds to the number.
A vanity swap by itself runs $800 – $3,000 in Oakley, depending on cabinet construction, top material and whether the drain needs moving. Call (888) 419-3650 for an exact quote on the vanity alone or combined with tile.
All of it is covered by our 730-Day Done Right Promise – if anything we installed isn’t right, we come back and make it right. That’s one of the longest workmanship guarantees in residential construction, and it covers labor, not just the material.
Get a Free Vanity, Tile and Fixture Estimate in Oakley
We come out, measure the room, look at the subfloor and the plumbing stub locations, and put a line-item estimate in your hands with no change-order surprises later. Bring your tile and fixture picks if you have them, or let us walk you through the options in person. Calls are answered by a live person, and estimates are free. Call (888) 419-3650 to schedule yours in Oakley.
Written by the team at Groundwork Construction Co.