Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What a Wood Fence in Concord, CA Costs and How Long It Takes
Most wood fence projects in Concord run $3,500 to $9,000 for a standard residential run, and a typical side-yard or back-line replacement takes two to four working days from demo to final post-set. The number moves with linear footage, height, wood species, gate count, and how much old fence and footing has to come out first. Call (888) 419-3650 and we’ll walk your property line, measure it, and hand you a written line-item estimate before anything gets ordered.

How We Build a Wood Fence in Concord, Stage by Stage
The order of operations on a wood fence matters more than people expect, because everything downstream depends on getting the posts set correctly in Concord’s soil before a single board goes up. Here’s how the job actually unfolds.
Day 1: Walk, mark, and demo
We confirm the property line (either against your plat or the existing fence line, and we flag anything ambiguous before digging), then pull the old panels and posts. On a 150-foot run with a rented dumpster on site, demo and haul-off usually takes half a day. You decide here whether the old posts come out entirely or whether any sound ones stay as intermediate supports, and that call gets written into the scope before we start.
Day 1-2: Layout, dig, and set posts
Post spacing lands at 6 to 8 feet depending on panel style. Holes go down 24 to 36 inches in this area, wider at the base, with gravel at the bottom for drainage and concrete poured around each post. Setting posts and letting the concrete cure is the single biggest time variable: fast-set mixes let us hang panels the next morning, while a colder, wetter winter window can push that to a full day. This is also where you lock in gate locations and swing direction; changing them after posts are set means re-digging.
Day 2-3: Rails, panels, and gates
We hang rails and boards, then build the gates last, because a gate hung before the posts have fully cured tends to sag. A single walk gate is a one-hour item for us; a double drive gate with a drop rod and heavy hinge set runs closer to half a day. This is the stage where the finished look takes shape and where you’ll want to be on site to eyeball the board height and spacing before the run is complete.
Day 3-4: Finish, gate hardware, and walkthrough
We cap posts, install latches and hinges, seal or stain if that’s in scope, and do a final walk with you. Fasteners get checked, gates get swung a dozen times, and any board that’s cupped or checked gets swapped. Most jobs wrap with a clean site and a dumpster scheduled for pickup the same day.
What gets decided when
Wood species, height, and board style get chosen before we order materials. Gate placement and swing direction get locked in before post holes are dug. Stain and sealer timing gets decided at the walkthrough, since fresh pressure-treated lumber usually wants a few weeks to dry before finish goes on. Get those three calls right and the job stays on schedule.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Wood Fence Options You’ll Choose Between
Almost every decision on a Concord wood fence comes down to how long you want it to last against the trade-off in cost and upkeep. Here’s the honest read on each.
- Pressure-treated pine: the standard choice for most residential runs. It handles Concord’s wet winters well when properly set and sealed, costs the least of the wood options, and lasts 15 to 20 years with periodic sealing. It’ll gray out if you skip maintenance.
- Cedar: naturally rot-resistant, lighter, and it takes stain beautifully. It costs more than pine, but it holds up longer against moisture and looks better as it ages. Good pick for a front-facing fence or a property line you see every day.
- Redwood: the premium option, with the best natural decay resistance of the three and a warm finish that doesn’t need staining to look right. The price reflects it. Best suited to a small, high-visibility run rather than a full perimeter.
- Board style: dog-ear, flat-top, or French gothic caps change the look and add a little to the cost. Board-on-board and shadowbox styles give more privacy and airflow, and cost roughly 15 to 25 percent more than a standard stockade panel.
- Height: 6-foot is the residential default. Stepping to 7 or 8 feet requires heavier posts and deeper footings and adds cost per linear foot. Anything over 6 feet near a property line may also bump into Concord’s height rules, which we check before ordering.
- Gates: a basic walk gate is straightforward. Drive gates with a wider span need a heavier frame, an anti-sag kit, and sometimes a metal core; those are the gates most likely to fail early if built light.
Where a fence meets a paver or concrete apron at the driveway edge, we set posts against a hard surface rather than soil, which is a spot homeowners often pair this with Paver Driveways in Concord work so the apron and fence line run clean together.
What Wood Fence Costs in Concord, CA
A wood fence in Concord typically lands between $3,500 and $9,000 for a residential run, with the low end covering a modest pressure-treated side-yard fence and the high end covering a longer cedar or board-on-board perimeter with a drive gate.

Five things push the number up or down:
- Linear footage and height: the biggest lever. A 100-foot 6-foot pine fence and a 200-foot 8-foot cedar fence are not the same conversation.
- Existing condition and demo: a rotten fence with concrete-set posts that have to be jacked out adds labor. A fence on sound posts that can be reused saves money.
- Wood species and board style: pine to cedar to redwood, and standard panels to board-on-board, each step adds cost per foot.
- Gate count and type: one walk gate is a small add. A double drive gate with heavy hardware is a real line item.
- Site access and terrain: a sloped hillside lot toward the Mount Diablo foothills needs stepped panels and more careful post depth. A tight side yard with a narrow gate blocks the dumpster and slows everything down.
A written estimate from us lists linear footage, species, height, board style, gate count and type, demo and haul-off, post depth and concrete, and finish or seal if included. What typically isn’t in a base number: stain or sealer, property line survey work beyond confirming the existing line, and any repair to a retaining wall or drainage the fence abuts. Upfront pricing means the number you see is the number you pay, and the whole job is backed by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Concord Homes Specifically Do to This Job
The housing stock is the story here. Concord’s older tracts, especially the post-war ranch neighborhoods off Clayton Road and around the Ygnacio Valley corridor, are full of original fencing that’s been patched and re-patched since the 1960s. We regularly find fence lines built right up against an unpermitted 1950s-60s addition or a shed that was never on the original plat, which means the first job is often figuring out where the actual property line sits before anyone digs. It’s also common to find fence posts set directly in soil without concrete on these older lots, so they’ve heaved and rotted at the base in ways that aren’t obvious until you pull a panel.
The climate shapes it too. Concord sits where the cool Diablo Valley floor meets the hot inland slopes, so a fence on the west side of town can fight marine-layer moisture that rots boards from the bottom up during wet winters, while the same fence style uphill takes extreme summer heat that dries and checks the wood faster. Add the winter rain and localized wind coming off the hills, and post depth and drainage at each footing do more to extend the fence’s life than the wood species does. If the wider property scope comes up, this is often part of a Fence Installation in Concord project where the whole perimeter gets planned at once. We pull the permits where they’re required and check height rules before ordering materials, and we cover the full range of zip codes across Concord, from the flats to the foothills.
Serving Concord, CA – Our Local Coverage Area
We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Wood Fence in Concord
Most residential wood fence installations in Concord take two to four working days, with demo on day one, posts set and curing overnight, panels and gates on days two and three, and finish work wrapping it up. Larger runs or hillside lots with stepped panels can stretch to five days. Call (888) 419-3650 for a schedule based on your specific lot.
Many residential fences in Concord fall under a height threshold and need no permit, but anything near or above 6 feet, or a fence next to a corner or slope, can trigger one depending on lot location. We check the requirement for your specific property line before ordering materials and pull the permit if it applies, so nothing gets flagged after the fact. Call (888) 419-3650 and we’ll tell you up front what your line requires.
In most cases yes. Fence posts go along the property line, so unless a sprinkler line or drainage run sits directly in the post path, the work stays clear of your plumbing and irrigation. Where a line does intersect, we flag it during the walk and work around it or hand-dig rather than trench through. Call (888) 419-3650 to set up an on-site walk so we can map it out.
A wood fence in Concord typically runs $3,500 to $9,000 depending on footage, species, height, and gate count. Our written estimate is fixed line-item pricing with no change orders for the scope written into it, so the number you see is the number you pay unless you add work mid-job. Call (888) 419-3650 for a free estimate.
Every wood fence we build is covered by our 730-Day Done Right Promise: if something isn’t done right, we make it right within that window. That covers our workmanship on posts, panels, and gates; the wood itself carries whatever the mill’s own material warranty provides, which we’ll spell out for the species you choose. Call (888) 419-3650 to talk through warranty coverage on your project.
Get a Free Wood Fence Estimate in Concord
If you’re planning a wood fence in Concord, call (888) 419-3650 to schedule a free on-site estimate. We’ll walk the property line, measure the run, talk through species and board style, and hand you a written line-item price with the 730-Day Done Right Promise behind it. You’ll also hear about $1,000 off projects over $10,000. If you’re weighing the wider project, look at our Fence Installation service and pair the fence with Concrete Driveways & Concrete Work in Concord where an apron meets the fence line.
Written by the team at Groundwork Construction Co.