Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Oakley, CA: What It Costs and What You Get
A wood fence in Oakley, CA typically runs $3,500 to $9,000 installed, with most standard lots landing between $4,500 and $7,200. That covers removal of the old fence, new posts set in concrete, cedar or pressure-treated boards, and a gate. A straight run of 120 to 150 linear feet takes two to three working days in good weather. For an exact number on your lot, call (888) 419-3650 and we’ll set up a free on-site estimate.

How a Wood Fence Goes In, Stage by Stage
Fence work is linear and predictable, which is why we can give you a real schedule before we start. Here’s the sequence on a typical Oakley property.
1. Marking the line and confirming property boundaries
Day one starts with the string line. We walk the boundary with you, mark the post centers, and confirm the line against your plat or a recent survey. On Oakley’s tract lots the side yards are often narrow and the true line doesn’t always match the old fence. This stage takes an hour or two, and it’s the one decision you can’t undo later. If you have a survey, have it out.
2. Tear-out and post setting
The old fence comes down and the posts go in the same day. We set posts at 2 to 2.5 feet deep in concrete, spaced every 6 to 8 feet depending on the panel design. Concrete needs to cure before the rails go on, so this is where the schedule takes its pause. In summer heat the mix sets faster than in the wet months; either way, posts aren’t loaded the next morning.
3. Rails, boards and the gate
Once the posts are set, rails go up and boards follow. We build the gate last, hung on a reinforced post with a diagonal brace, because a sagging gate is the number one complaint we hear about every other fence. This is also when you confirm board height, cap style and whether you want a top cap rail.
4. Staining or sealing
New wood needs to dry before it takes a finish. Cedar can be sealed within days; pressure-treated pine wants a few weeks to dry out first. We’ll tell you the window and write it on the estimate so you’re not guessing.
5. Final walk and cleanup
We walk the line with you, check gate swing and post plumb, haul off the old material, and leave the yard clean. Anything that doesn’t meet the line gets fixed before we call it done. If it ever doesn’t, the 730-Day Done Right Promise covers it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Wood fencing isn’t one product. The choices below are the ones that actually change the price and the lifespan, and you’ll settle most of them at the estimate.
- Cedar vs. pressure-treated pine. Cedar resists rot and insects naturally, takes stain well, and costs more per board foot. Pressure-treated pine is the budget choice and needs sealing to last. On Oakley’s hot, dry summers, cedar holds its looks longer without refinishing.
- Board style: dog-ear, flat-top, or cap-and-trim. Dog-ear is the standard privacy board and the cheapest. A cap rail and trim package looks finished and protects the top edge, and it adds cost per panel.
- Height and privacy. Six feet is standard. Eight feet changes the wind load, the post depth, and sometimes the permit picture, so it’s a line item, not a free upgrade.
- Post spacing and rail count. Two rails is standard; three rails add stiffness in high-wind spots and on longer runs.
- Gate style. A pedestrian gate is straightforward. A driveway gate on a wider opening needs a beefier frame and hardware, and it’s priced separately.
What Wood Fence Costs in Oakley, CA
Plan on $3,500 to $9,000 for a full wood fence install in Oakley. The variables below are what push a job toward the low or high end.

- Linear feet. The biggest lever. A small side-and-back run sits near the bottom of the range; a full perimeter on a large corner lot goes to the top.
- Tear-out and disposal. Hauling off an old fence and pulling concrete footings adds to the job.
- Material grade. Cedar over pressure-treated, plus a cap-and-trim package, moves the number up.
- Access. Tight side yards or a slope that needs stepped panels take more labor.
- Gates. Each gate is its own line item.
Our written estimate is line-itemed: linear feet, material grade, gates, tear-out, stain, permits where required. Upfront pricing, no surprises, and the number you see is the number you pay. What typically isn’t in a fence estimate: sprinkler or utility line relocation if a post hits one, and any finish work scheduled weeks out after the wood dries.
See the difference
Before
After
Before
After
Before
AfterWhat Oakley Homes Specifically Do to This Job
Oakley’s housing stock shapes fence work here. Most of what we see sits in the 1990s and 2000s tract homes and newer subdivisions spreading out along the Hwy 4 corridor, with older ranch homes and farmhouses near historic downtown along Main Street. Those newer lots sit on expansive clay and former Delta farmland, and that matters at the post holes. Shrink-swell clay moves with the seasons: a post set shallow in August can heave once the winter rains soak the ground. We set deeper in clay and brace harder because of it.
The summer dry season works in our favor for scheduling and curing, and the wet months are when a fence that was never set right starts leaning. On the older properties near Main Street, the fence line often cuts across buried irrigation or an old property marker. Confirming the line before we dig saves everyone a headache. If the fence is part of a bigger yard project, that’s where our fence installation work and a full Fence Installation in Oakley scope come in, and homeowners often pair a new fence with Paver Driveways in Oakley or Concrete Driveways & Concrete Work in Oakley to finish the lot in one pass. We cover all of Oakley and the surrounding East Contra Costa communities, including Brentwood, Antioch, Discovery Bay and Bay Point.
Serving Oakley, CA – Our Local Coverage Area
We serve Oakley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Wood Fence in Oakley
A typical wood fence in Oakley runs $3,500 to $9,000 installed, with most jobs landing in the $4,500 to $7,200 range. Linear feet, material grade, gates and tear-out are the main levers. Call (888) 419-3650 for an exact quote; estimates are free.
Most wood fences in Oakley take two to three working days, weather permitting, with the post-concrete cure as the built-in pause. Larger perimeters and stain finish work add time. The estimate spells out the schedule so you know what to expect.
Oakley fence permits depend on height, location and your property’s specific rules, so we confirm what applies before we start and pull what’s needed. We don’t guess on permits. That’s part of the free estimate.
No. Our written estimate is fixed, line-itemed and upfront, so the number you see is the number you pay. If we find a buried utility or a surprise on the line, we stop and talk to you before adding a dollar.
Every fence we install is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That’s two full years on posts, panels, gates and workmanship. Our technicians bring up to 12 years of experience to each job.
Get Your Free Wood Fence Estimate in Oakley
Call (888) 419-3650 for a free on-site estimate on your Oakley wood fence. We’ll walk the line with you, talk through cedar versus pressure-treated, gates and finish, and leave you with a written, line-itemed price. Live person, 24/7. Licensed, insured, and backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.